TEST REPORT Stihl FS 460 C-EM
Transcription
TEST REPORT Stihl FS 460 C-EM
TEST REPORT Stihl FS 460 C-EM Test-No.: 5942 OWNER OF THE TEST REPORT: Manufacturer and applicant: Andreas Stihl AG & Co. KG Badstrasse 115 D- 71336 Waiblingen www.stihl.de FS 460 C-EM FS 460 C-EM L FS 460 C-EM K 5942 – Stihl FS 460 C-EM Test results and evaluation Brushcutter Stihl FS 460 C-EM with motor managementsystem and Ergo Start Brushcutter STIHL FS 460 C-EM with standard shaft length Brushcutter STIHL FS 460 C-EM K with short shaft Brushcutter STIHL FS 460 C-EM L with long shaft Models with chisel-tooth circular saw Ø 225 mm Andreas Stihl AG & Co. KG; Badstrasse 115; 71336 Waiblingen Test item Application field Test result Evaluation Brushcutter in the power class between 2 and 3 kW for professional use Engine power Power at P max = 2.1 kW Md max at 1.5 kW Speed Spec. fuel consumption Torque 9500 min-1 2.1 Nm 46 kW/l 5750 min-1 2.5 Nm 33 kW/l NE Fuel consumption absolute / specific At max. power at max. torque 1.2 l/h 1.0 l/h 380 g/kWh 446 g/kWh Exhaust emission Complies with type approvals level II of the standard 2002/88 EG Approval number: e1*97/68SH2-IIA*2010/26*0611*00 + o Max. noise development FS 460 C-EM (brushcutter)/ FS 460 C-EM K (circular saw) at ear of operator idle Full throttle, no load 77 / 75 dB(A) 104 / 102 dB(A) - Equivalent noise pressure level according to DIN EN ISO 22868: 101 / 99 dB(A) Equivalent noise power level according to DIN EN ISO 22868: 110 / 110 dB(A) (Mix: idling / full throttle) Max. Vibration FS 460 C-EM (brushcutter)/ Idling Full throttle, unloaded Left handle 1.5 / 2.0 m/s² 2.5 / 3.1 m/s² Right handle 1.3 / 1.7 m/s² 1.8 / 2.4 m/s² FS 460 C-EM K (circular saw) + Equivalent vibration total value according to DIN EN ISO 22867 left handle 2.0 /2.6 m/s²; front handle 1.6 / 2.1 m/s² Weight Weight per unit power FS 460 C-EM Weight Without cutting attachment 4.0 kg/kW 2/5 Weight per unit power FS 460 C-EM o 5942 – Stihl FS 460 C-EM Operability / Handling Control elements Easy to reach and use o Machine start Mechanical starting aid (Ergostart) to facilitate engine start; with prímer Electronic control, regulating screw no longer present. + Motor management ++ Tool replacement Requires tools (locking pin) o Shaft/handlebar no tools required to adjust shaft to work and transport position + Tank filling Fuel level of tank visible from outside + Harness easy to adjust, very comfortable, padded belts + Easy access, tools required for removing cover o Fixed by two bolts, removal requires tools simple, no tools requied low o Maintenance Sparkplug / cover removal Air filter cover cleaning soiling + o Reliability No defects during test o Operating manual clear, well illustrated o Operator safety GS-type examination test DPLF Certificate no: D-GS 10.111 Rating: ++ / + / o / - / --./.(o = Standard / NE= no evaluation, complies with tolerance value) 3/5 NE 5942 – Stihl FS 460 C-EM Description and technical details Motor - Air-cooled single-cylinder two-stroke engine ³ - Engine displacement 45.6 cm ; bore 44 mm; stroke 30 mm − Spark plug: NGK CMR6H Fuel: minimum octane number 90 RON (mixed lubrication 1:50) or two stroke special fuel with “KWF Test”; Manufacturer's recommendation: Stihl MotoMix Drive - Drive shaft enclosed by shaft and seated in plastic liner - Angular gear: gear ratio FS 460 C-EM / L 1:0.69 / FS 460 C-EM K 1:0.79 - Output shaft thread: M12 x 1.5 left - Shaft 28 mm x 2.0 mm - Angle shaft / out put shaft: 145° (for mounting brushcutter) 155° (for mounting circular saw) Main dimensions and weights (measured values) FS 460 C-EM 1790 mm FS 460 C-EM K Length Without cutting equipment Width Engine unit 265 mm Height Engine unit 245 mm Fuel tank volume Weight 1675 mm FS 460 C-EM L 1850 mm 0.75 l Engine unit (empty weight, without tools and tool protector) 8.5 kg 4/5 8.4 kg 8.6 kg 5942 – Stihl FS 460 C-EM Test Test facility Kuratorium für Waldarbeit und Forsttechnik, Gross-Umstadt DLG-Testzentrum Technik & Betriebsmittel, Gross-Umstadt Field test: Forstliches Bildungszentrum Itzelberg, Königsbronn Forstliche Ausbildungsstätte Ort, A-Gmunden Forstamt Ehringshausen Authors Josef Albert, DLG, Gross-Umstadt Patrick Müßig, KWF, Gross-Umstadt KWF-Test committee Test committee „Forstgeräte und Werkzeuge“(“Equipment and tools”) Chairman: Sebastian Paar, Ruhpolding FPA/DLG-approval valid until October 2016 In acknowledgement of the results of the test carried out by the KWF the approved product is also entitled to carry the following test marks: : Published by DLG-Testzentrum Technik & Betriebsmittel Max-Eyth-Weg 1 D-64823 Gross-Umstadt Telephone: +49 069/24788-611 Fax: +49 069/24788-110 E-mail: [email protected] Internet: www.dlg-test.de ENTAM European Network for Testing of Agricultural Machines c/o ENAMA Via Venafro, 5 I-00159 Rome Telephone: +39 06 40860030 Fax: +39 06 4076264 E-mail: [email protected] Internet: www.entam.com Kuratorium für Waldarbeit und Forsttechnik e.V. Forsttechnischer Prüfungsausschuss (FPA) Spremberger Strasse 1 D-64823 Gross-Umstadt Telephone: +49 06078/785-0 Fax: +49 06078/785-50 E-mail: [email protected] Internet: www.kwf-online.de Supported by the Federal Ministry of Consumer Protection, Food and Agriculture per decision by the German Bundestag and the State Forest Administrations 5/5