full dinA4_baja
Transcription
full dinA4_baja
ISC SPAIN Previsió, 1 / 08970 Sant Joan Despí / Barcelona T. +34 93 477 61 40 / F. +34 93 477 61 41 HEADQUARTERS Velázquez, 27, Planta 1 Izq / 28001 Madrid T. +34 91 269 38 44 / F. +34 91 269 33 37 E-mail: [email protected] Paseo de Gracia, 12, 1er piso 08007 Barcelona / Spain T. +34 93 184 39 75 / F. +34 93 477 61 30 E-mail: [email protected] www.iscsl.es www.isc-sl.com Datos Bancarios / Bank Account: Triodos Bank, N.V. España IBAN: ES8314910001262010719223 BIC(SWIFT): TRIOESMMXXX Matière: PA66 (Polyamide 66) Caractéristiques High strength and stiffness at high temperature Good impact strength (even at low temperature) Good abrasion and wear resistance Excellent fuel and oil resistance Good fatigue resistance Excellent surface appearance Good electrical insulating properties Good UV resistance Good mechanical properties (like stiffness and toughness) High heat resistance Good weathering resistance Good chemical resistance Good wear, abrasion and friction behaviour Low flammability (using halogen free flame retardants) Excellent dirt resistance and easy to clean Excellent alternative to polypropylene Very high puncture resistance Good barrier resistance to oxygen, carbon dioxide and aromas Good transparency Description PA6-6 or Nylon 6-6 is made of hexamethylenediamine and adipic acid, which give nylon 6,6 a total of 12 carbon atoms, and its name. PA66 is used when PA6 reaches its limit temperature or when the hydrolytic stability of PA6 is not sufficient anymore. It is made of repeating units linked by amide bonds. Nylon was the first commercially successful synthetic polymer. Usages habituels Small bearings, gears, windshield wipers, football helmets, shoes, inks, clothing, parachute fabrics, rainwear, cellophane, door handles, radiator grilles, containers, circuit breakers, contactors, connectors, tubes for wirings and cables protection, carpets and rugs , brushes, brooms, stadium seats, ski bindings, films for food packaging, washers, bushings, plugs, valve bodies, screws, nuts ISC DEUTSCHLAND ISC FRANCE ISC POLSKA Hermannstraße 9 / D-20095 Hamburg T. +49 (0) 40 6386 9866 E-mail: [email protected] 34 Avenue des Champs Elysées / 75 008 Paris T. + 33 (0)1 84 16 63 67 E-mail: [email protected] T. +48 327 281 525 E-mail: [email protected] Bankkonto: Triodos Bank N.V. Deutschland IBAN: DE09500310001009415005 BIC(SWIFT): TRODDEF1 Compte Bancaire: CIC Iberbanco IBAN: FR7641199110540002640910115 BIC(SWIFT): CMCIFRPP Konto Bankowe: CaixaBank, S.A. (Spółka Akcyjna) Oddzia ł w Polsce IBAN: PL87239000040010030020001081 BIC(SWIFT):CAIXPLPWXXX www.iscsl.de www.iscsl.fr ISC PLASTIC PARTS, S.L. Warsaw Financial Center / ul. Emilii Plater 53 / 00-113 Warszawa www.iscsl.pl - NIF *VAT No.* USt-IdNr. *Nº TVA * NIP EU: ESB62140579 Impreso en papel respetuoso con el medio ambiente, libre de cloro y con tintas ecológicas - Printed on chlorine-free, environmentally friendly paper, and using ecological inks. ISC SPAIN Previsió, 1 / 08970 Sant Joan Despí / Barcelona T. +34 93 477 61 40 / F. +34 93 477 61 41 HEADQUARTERS Velázquez, 27, Planta 1 Izq / 28001 Madrid T. +34 91 269 38 44 / F. +34 91 269 33 37 E-mail: [email protected] Paseo de Gracia, 12, 1er piso 08007 Barcelona / Spain T. +34 93 184 39 75 / F. +34 93 477 61 30 E-mail: [email protected] www.iscsl.es www.isc-sl.com Datos Bancarios / Bank Account: Triodos Bank, N.V. España IBAN: ES8314910001262010719223 BIC(SWIFT): TRIOESMMXXX Matière: PA66 (Polyamide 66) Electrical Properties: Dielectric Constant (a 1MHz/) : 3,4 Dissipation Factor (a 1 kHz) : 0,2 Dielectric Resistance (kV mm-1) : 25 Surface Resistivity (Ohm/sq ) : 10E11 Volume Resistivity (Ohm/cm ) : 10E13 Physical Properties: Water Absorption - Equilibrium (%) : 8 Water Absorption - in 24 hours (%) : 2,3 Density (g cm-3) : 1,14 Refractive Index: 1,53 Oxygen Index Limit (%) : 23 Flammability (UL94) : HB UV Stability: + Mechanical Properties: Friction Coefficient: 0,2-0,3 Elongation at Rupture (%) : 30-150 Hardness (Rockwell) : M89 Tensile Modulus (GPa) : 3,3 Poisson's Ratio: 0,41 Abrasion Resistance (mg/1000 ciclos/cycles/cycles) : 03-05 Tensile Strength (Mpa) : 82 Izod Impact Resistance (J m-1) : 40-110 Thermal Properties: Thermal Expansion Coefficient (x10-6 K-1) : 90 Thermal Conductivity (W m-1 K-1) : 0,25 Specific Heat Capacity (J K-1 kg-1) : 1700 Maximum Operating Temperature (ºC) : 80-180 Minimum Operating Temperature (ºC) : -30 Heat Deflection Temperature (0,45MPa) (ºC) : 200 Heat Deflection Temperature (1,8MPa) (ºC) : 100 Chemical Resistance (General): Acids - Concentrated: Acids - Diluted: Alkalis: + Alcohols: ++ Ketones: ++ Grease & Oils: ++ Halogens: Aromatic Hydrocarbons: ++ Glosario +++ Excelent ++ Good + Fair - Poor ND No data available ISC DEUTSCHLAND ISC FRANCE ISC POLSKA Hermannstraße 9 / D-20095 Hamburg T. +49 (0) 40 6386 9866 E-mail: [email protected] 34 Avenue des Champs Elysées / 75 008 Paris T. + 33 (0)1 84 16 63 67 E-mail: [email protected] T. +48 327 281 525 E-mail: [email protected] Bankkonto: Triodos Bank N.V. Deutschland IBAN: DE09500310001009415005 BIC(SWIFT): TRODDEF1 Compte Bancaire: CIC Iberbanco IBAN: FR7641199110540002640910115 BIC(SWIFT): CMCIFRPP Konto Bankowe: CaixaBank, S.A. (Spółka Akcyjna) Oddzia ł w Polsce IBAN: PL87239000040010030020001081 BIC(SWIFT):CAIXPLPWXXX www.iscsl.de www.iscsl.fr ISC PLASTIC PARTS, S.L. Warsaw Financial Center / ul. Emilii Plater 53 / 00-113 Warszawa www.iscsl.pl - NIF *VAT No.* USt-IdNr. *Nº TVA * NIP EU: ESB62140579 Impreso en papel respetuoso con el medio ambiente, libre de cloro y con tintas ecológicas - Printed on chlorine-free, environmentally friendly paper, and using ecological inks.