Motorcycle Manufacturer Model FZX 750 Issue 7/95 – rev. 00

Motorcycle Manufacturer
Model
Issue
FZX 750
7/95 – rev. 00
Recommended siting
Under the seat near the battery, via the bracket that
holds the fuse support.
Power supply
Connect the positive and the negative supply wires of
the alarm system to the battery terminals.
Engine immobilisation (1)
Follow diagram B. Cut the BLACK/RED wire of the
connector of the ignition lock, behind the steering post.
Engine immobilisation (2)
Follow diagram B. Cut the LIGHT BLUE/WHITE wire
of the connector of the right switch located behind the
steering post.
Ignition controlled positive
supply
Connect to the BROWN wire of the connector of the
ignition lock located behind the steering post.
Turn indicators
Connect to the DARK GREEN and BROWN wires of
the rear turn indicators.
The information contained herein is merely indicative and without responsibility on SPYBALL. You are strongly recommended to check for possible
discrepancies or for changes made by the motorcycle manufacturer prior to connecting.
COBRA AUTOMOTIVE TECHNOLOGIES SPA - SPYBALL BUSINESS UNIT - VIA ASTICO 41 – 21100 VARESE (VA) www.spyball.it [email protected]