LAN cabling systems Category 6
Transcription
LAN cabling systems Category 6
LAN cabling systems Category 6 Table of content Symbols 3 Category 6 4 LANmark-6 cable 5 LANmark-6 Patchcords 7 LANmark-6 Snap-in connector Legal Notice 1/14/04 10 12 Page 2 / 13 Symbols Flame retardant 1/14/04 Page 3 / 13 Category 6 LANmark-6 is considered the best horizontal solution for most enterprise requirements by combining high performance for today, room for growth tomorrow, and high reliability and efficiency. Recommended uses: • • • • Typical 5-10 year building life Typical enterprise applications - Fast Ethernet & Gigabit Ethernet Where IT is considered a vital business tool Typical office or indoor industrial environments 1/14/04 Page 4 / 13 LANmark-6 cable • • • • Complies to latest Cat 6 standards Supports Class E applications Central cross member maintains geometry and performance Tested up to 350MHz Description Application LANmark-6 cable is the ultimate solution for a future proof network. It is specifically designed to support the exacting requirements for tomorrow's protocols, yet is fully backwards compatible with today's needs. It is the recommended cable for all forthcoming installations. • 10baseT Ethernet • 100baseTX Fast Ethernet • 1000baseTX Gigabit Ethernet • 155 MBit ATM • 622 MBit ATM • 1.2 Gbit ATM • future class E applications LANmark-6 is independently verified to exceed the requirements of the ISO/IEC 11801:2002 Category 6 requirements. Performance Tested to 350 MHz and with guaranteed performance to 250 MHz, Nexans LANmark-6 cables provide guaranteed headroom and bandwidth over and above the requirements of all international, european and american cable standards, including ISO/IEC 11801:2002, IEC 61156-5, EN 50173, EN 50288, TIA/EIA 568B.2-1. Standards International ISO/IEC 11801; IEC 61156-5; EN 50288 National TIA/EIA-568-B.2-1 Installation LANmark-6 is installed in exactly the same way as Category 5 cables. The C³ central cross member reduces the risk of crushing and kinking. Flame retardant IEC 60332-1 1/14/04 Page 5 / 13 LANmark-6 cable Characteristics Dimensional characteristics Gauge (AWG) Electrical characteristics Characteristic impedance Transmission characteristics Attenuation, max. 250 MHz Near End Crosstalk, 250MHz Attenuation Crosstalk Ratio, 250MHz Powersum Near End Crosstalk, 250MHz Powersum Equal Level Far End Crosstalk, 250Mhz Return loss, 250MHz Velocity of propagation Propagation delay, max. 100 MHz Skew Usage characteristics Flame retardant Category 24 100 Ohm 32.8 dB/100m 38.3 dB 5.5 dB/100m 36.3 dB 19 dB 17.3 dB 68.0 % 536 ns/100m 30 ns/100m IEC 60332-1 Cat. 6 Product List Nexans ref. N100.601 N100.603 N100.605 N100.605N N100.606 N100.606N N100.607 N100.607N N100.608 N100.608N N100.611 N100.613 N100.616 N100.616N N100.617 N100.617N N100.619 N100.631 N100.632 N100.633 N100.661 N100.662 1/14/04 Name LANmark-6 F²TP Cat6 LSZH 1000m reel LANmark-6 F²TP Cat6 Dual LSZH 500m reel LANmark-6 UTP Cat6 LSZH 500m reel LANmark-6 UTP Cat6 new LSZH 500m reel LANmark-6 UTP Cat6 LSZH 1000m reel LANmark-6 UTP Cat6 new LSZH 1000m reel LANmark-6 UTP Cat6 LSZH Box 305m LANmark-6 UTP Cat6 new LSZH Box 305m LANmark-6 UTP Cat6 PVC 500m reel LANmark-6 UTP Cat6 new PVC 500m reel LANmark-6 F²TP Cat6 PVC 1000m reel LANmark-6 F²TP Cat6 Dual PVC 500m reel LANmark-6 UTP Cat6 PVC 1000m reel LANmark-6 UTP Cat6 new PVC 1000m reel LANmark-6 UTP Cat6 PVC Box 305m LANmark-6 UTP Cat6 new PVC Box 305m LANmark-6 UTP Cat6 Dual PVC 500m reel LANmark-6 S-FTP Cat6 LSZH 1000m reel LANmark-6 S-FTP Cat6 LSZH 500m reel LANmark-6 S-FTP Cat6 Dual LSZH 500m reel LANmark-6 F²TP Cat6 PVC 500m reel LANmark-6 F²TP Cat6 LSZH 500m reel Type of cable F²TP F²TP Shotgun UTP UTP UTP UTP UTP UTP UTP UTP F²TP F²TP Shotgun UTP UTP UTP UTP UTP Shotgun S-FTP S-FTP S-FTP Shotgun F²TP F²TP Outer sheath LSZH LSZH LSZH LSZH LSZH LSZH LSZH LSZH PVC PVC PVC PVC PVC PVC PVC PVC PVC LSZH LSZH LSZH PVC LSZH Page 6 / 13 LANmark-6 Patchcords • • • • • Complies with the latest Category 6 standards Uses Nexans cable technology Fully matched with other components for maximum performance Unscreened & Screened or Ultim LSZH Flame retardant jacket as standard Description Application LANmark-6 patchcords can be used to deliver a full end-to-end Class E solution. LANmark-6 Ultim cords offer superior performance and deliver an additional 6dB channel ACR headroom. They can also be used for accurate field testing of channel performance. They provide improved data throughput and allows for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords • High Speed Multimedia patchcords Installation • Small cross section allows neat installation and simplifies the creation of bundles in cabinets. • A Low Smoke Halogen Free - Flame Retardant jacket is standard. • 1, 2, 3 and 5m are standard lengths, other lengths are available on demand. • 15 m is standard length for single end patchcord. Other lengths are available on demand. • Orange and dark grey are standard. • Rugged construction. 1/14/04 Standards International ISO/IEC 11801 Page 7 / 13 LANmark-6 Patchcords Product List Nexans ref. N101.214CF N101.214CO N101.214EF N101.214EO N101.214FF N101.214FO N101.214HF N101.214HO N101.224CF N101.224CO N101.224EF N101.224EO N101.224FF N101.224FO N101.224HF N101.224HO N101.225CF N101.225CO N101.225EF N101.225EO N101.225FF N101.225FO N101.225HF 1/14/04 Name LANmark-6 RJ45 Patchcord, unscreened, LSZH, Grey, 1 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Orange, 1 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Grey, 2 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Orange, 2 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Grey, 3 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Orange, 3 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Grey, 5 m LANmark-6 RJ45 Patchcord, unscreened, LSZH, Orange, 5 m LANmark-6 RJ45 Patchcord, screened, LSZH, Grey 1m LANmark-6 RJ45 Patchcord, screened, LSZH, Orange, 1 m LANmark-6 RJ45 Patchcord, screened, LSZH, Grey, 2m LANmark-6 RJ45 Patchcord, screened, LSZH, Orange, 2 m LANmark-6 RJ45 Patchcord, screened, LSZH, Grey, 3m LANmark-6 RJ45 Patchcord, screened, LSZH, Orange, 3 m LANmark-6 RJ45 Patchcord, screened, LSZH, Grey, 5m LANmark-6 RJ45 Patchcord, screened, LSZH, Orange, 5 m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Grey 1m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Orange 1m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Grey 2m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Orange 2m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Grey 3m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Orange 3m LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Grey 5m Range Length (m) LANmark-6 1 Grey No LANmark-6 1 Orange No LANmark-6 2 Grey No LANmark-6 2 Orange No LANmark-6 3 Grey No LANmark-6 3 Orange No LANmark-6 5 Grey No LANmark-6 5 Orange No LANmark-6 1 Grey Yes LANmark-6 1 Orange Yes LANmark-6 2 Grey Yes LANmark-6 2 Orange Yes LANmark-6 3 Grey Yes LANmark-6 3 Orange Yes LANmark-6 5 Grey Yes LANmark-6 5 Orange Yes 1 Grey Yes 1 Orange Yes 2 Grey Yes 2 Orange Yes 3 Grey Yes 3 Orange Yes 5 Grey Yes LANmark-6 Ultim LANmark-6 Ultim LANmark-6 Ultim LANmark-6 Ultim LANmark-6 Ultim LANmark-6 Ultim LANmark-6 Ultim Colour Screen Page 8 / 13 Nexans ref. Name LANmark-6 ULTIM Category 6 RJ45 Patch cord LSZH Orange 5m LANmark-6 RJ45 Single-end Patchcord, N101.244QO unscreened, LSZH, Orange, 15 m LANmark-6 RJ45 Single-end Patchcord, screened, N101.254QO LSZH, Orange, 15 m LANmark-6 ULTIM Category 6 RJ45 Single End N101.255QO Patch cord LSZH Orange 15m N101.225HO 1/14/04 Range Length (m) Colour Screen LANmark-6 Ultim 5 Orange Yes LANmark-6 15 Orange No LANmark-6 15 Orange Yes LANmark-6 Ultim 15 Orange Yes Page 9 / 13 LANmark-6 Snap-in connector • • • • Cat 6 Snap-in available in 3 versions UTP, FTP, EMC. Fits in all structural hardware designed for this range. Easy termination, without punch down tool. An adapter can be added to fit the keystone format Description Application The LANmark-6 Toolless Snap-in connector is part of the Nexans modular system and fits in all structural hardware designed for this range. As such it supports all data applications defined for Cat5, Cat5E and Cat6, such as 10baseT, Fast Ethernet, Gigabit Ethernet, 155 ATM, 622 ATM, 1.2 ATM… Performance The LANmark-6 Snap-in connector has been designed to reach the highest performance in Cat 6 and Class E. It has outstanding performance for attenuation (insertion loss), NEXT/FEXT, Power Sum NEXT/FEXT and Return Loss, exceeding the Cat 6 connector specs as in ISO/IEC 11801:2002. The unique cross-technology in the connector ensures the high performance of the link. Used with Nexans LANmark-6 cables and patchcords, the connector is independently tested to exceed the link and stringent four-connector channel requirements as defined in the ISO/IEC 11801:2002. Standards Guarantees International ISO/IEC 11801 The LANmark-6 Snap-in connector is covered by the guarantee as in The General Terms and Conditions of Sales. In combination with the Nexans LANmark-6 product range, the Nexans Certified System Warranty can be obtained, covering parts, system and labour warranty. Installation The LANmark-6 Snap-in connector is a toolless connector. It is designed to be terminated by hand, without punchdown tool. For faster and easier installation of large volumes, an optional comfort tool can be used. • • • • • Fast termination of cable Colour code : TSB568A &TSB568B Can be used with all types of cables : F²TP, UTP or STP Accepts 24, 23 and 22 AWG cable UL listed 1/14/04 Page 10 / 13 LANmark-6 Snap-in connector Characteristics Construction characteristics Connector type Dimensional characteristics Height Width Depth RJ45 and Tool-less IDC 19.5 mm 17 mm 41.4 mm Product List Nexans ref. N420.610N N420.615 N420.620N N420.625 N420.630N N420.635 1/14/04 Name LANmark-6 Snap-in connector, Toolless connectivity, unscreened LANmark-6 Snap-in connector, Toolless connectivity, unscreened new version LANmark-6 Snap-in connector, Toolless connectivity, screened, without rear cover LANmark-6 Snap-in connector, Toolless connectivity, screened, without rear cover new version LANmark-6 Snap-in connector, Toolless connectivity, screened, with rear cover (EMC) LANmark-6 Snap-in connector, Toolless connectivity, screened, with rear cover (EMC) new version Page 11 / 13 Legal Notice 1.COPYRIGHT All rights reserved © Copyright 2001 - 2004 Nexans, Paris, France. You are authorized to copy documents published by Nexans on the World Wide Web. The authorization is limited to: 1. 2. Non-commercial use within your organization, Use for informational purposes only. This authorization is given on condition that any copy of these documents or extracts therefrom made by you shall retain all proprietary notices, including this copyright notice. 2. MARKS (trademarks, service marks) AND TRADENAMES The Nexans word and the Nexans logo are registered trademarks and service marks of Nexans. No mention is made of rights with respect to other trademarks, service marks or tradenames whether registered or not, which may attach to certain words or signs used herein. The absence of such mention, however, in no way implies that there is no protection of these marks, tradenames, words or signs. 3. OTHER INTELLECTUAL PROPERTY RIGHTS Note that any product, process or technology described in these document may be the subject of other Intellectual Property Rights reserved by Nexans or a third party. No right to use such Intellectual Property Right is granted hereunder. 4. REMARKS Nexans provides access to internationally used Nexans data and, therefore, may include references to Nexans products, programs, and services not available in your country. This does not mean that Nexans intends to offer such product, programs and services in your country. This information is PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ; FURTHER NO WARRANTY IS MADE AS TO THE COMPLETE OR UP-TO-DATE NATURE OF INFORMATION AVAILABLE ON THE SITE. This information may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein and will be incorporated in new editions. Nexans may make improvements or changes in the products, the programs or services described at any time without notice. 5. DATA PROTECTION Nexans e-service has been declared to the French "Commission Nationale Informatique et Liberté" under the number 790822. 1/14/04 Page 12 / 13 Global expert in cables and cabling systems Distributed by :