Adaptateur Wifi Multimédia Universel
Transcription
Adaptateur Wifi Multimédia Universel
Adaptateur Wifi Multimédia Universel WNCE3001 EN RÉSUMÉ Connectez vos équipements Multimédia disposant d'un port réseau en Wi-Fi et à Internet. Universel - fonctionne avec tous les appareils équipés d'un port Ethernet (port réseau) : Télé HD, lecteur Multimédia, lecteur Blu-Ray, console de jeu, etc. WI-FI DUAL BAND Le Dual Band fournit des performances optimales pour le streaming vidéo lorsque vous connectez votre Home Cinéma à Internet. Pratique - vous pouvez l'alimenter via le port USB ou sur une prise électrique. LA DIFFÉRENCE NETGEAR - WNCE3001 Compatibilité universelle Performance Dual Band Pas besoin de CD pour l'installation wireless Sécurisation simplifiée grâce au bouton Push' N' Connect Alimentation facile En savoir plus sur www.netgear.com/connectWiFi Connectez un périphérique Ethernet à votre réseau Wireless existant. Adaptateur Wifi Multimédia Universel Branchez un appareil Ethernet à votre réseau Wireless connecté à Internet Alimentation (via port USB ou prise électrique) ou Lecteur Blu-ray ou ou TV HD Enregistreur Console de jeu WNCE3001 Port Ethernet Reset Push ‘N’ Connect Routeur - Matériel Home Cinéma équipé d’un port Ethernet (TV, enregistreur, console de jeu, ...) - Microsoft® Internet Explorer® 6.0, Firefox® 2.0 ou Safari® 1.4 ou version supérieure pour la configuration logicielle. Contenu - Adaptateur Ethernet Wireless Dual Band (WNCE3001) - Support - Câble Ethernet - Câble USB pour l’alimentation - Alimentation - Dimensions : 81.6 x 62 x 17.9 mm - Poids : 60 g Pré requis système - Réseau Wireless existant connecté à Internet Routeur ou point d’accès wireless 802.11 b/g/n 2.4 ou 5 GHz Support Technique 0820 88 71 77* * 0,118 €TTC la minute Plus d’informations sur http://www.netgear.fr/hotline Standards - IEEE® 802.11n version 2.0 Garantie - 2 ans Caractéristiques Spécifications physiques 2, rue de Marly 78150 LE CHESNAY Tél : 01 39 23 98 50 Fax : 01 39 43 08 47 www.NETGEAR.fr Internet - Connectez le à un réseau Wireless existant - Push ‘N’ Connect utilise la technologie WPS (Wi-Fi Protected Setup®) pour une sécurisation facile. - LED dynamiques affichant l’état du réseau en temps réel. - WPA2-PSK, WPA-PSK (Wi-Fi Protected Access®) et cryptage WEP. - 1 port Ethernet pour connecter votre matériel Audio / Vidéo © 2011 N ETGEAR, Inc., N ETGEAR, the N ETGEAR Logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. Other brand names mentioned herein are for identification Ce produit est livré avec une garantie limitée dont l'acceptation est une condition de vente.