MTM Machine Tool Post Processor Support for DMG
Transcription
MTM Machine Tool Post Processor Support for DMG
GibbsCAM® MTM Multi-Task Machining Post Processor Support for DMG / MORI SEIKI Machine Tools GibbsCAM Multi-Task Machining (MTM) is a powerful environment for programming CNC multi-task machine tools. Its graphical user interface provides a natural and intuitive approach for creating and optimizing CNC programs. But CNC programming is only as good as the NC code it generates and this is where GibbsCAM truly excels. Working with you, GibbsCAM MTM is configured to your specific machine tool(s) by a team of MTM experts ensuring the highest level of MTM programming power. Factory-built post processors are also supplied ensuring the highest quality of posted output. The following is a list of different models that are currently supported by GibbsCAM MTM. This is not an all inclusive list, but is only intended to represent the range of DMG / MORI SEIKI MTM machine tools currently being supported by GibbsCAM MTM. Contact Gibbs and Associates for confirmations as to whether or not a specific DMG / MORI SEIKI machine tool not listed here is now supported by GibbsCAM MTM. Supported DMG / MORI SEIKI Machine Tool Models: AL22S DL SERIES: DL15 DL150 DL150Y DL20 DL25 MT SERIES: MT253 MT1500SZ MT2000 MT2000SZ MT2500SZ MT3000S MLG159/PDF/0913 NL SERIES: NL1500 SMC NL1500SY NL2000 SMC NL2000SY NL2500 SMC NL2500Y NL2500MY NL2500SY NLX2500SY NLX5000SY NVM SERIES: NMV 5000DCG NT SERIES: NT3100 to NT5400 NZ SERIES: NZ1500T2 to NZ2000T3Y3 SL SERIES: SL150 SMC SL150S SL150Y SL154 SMC SL2500SY ZL SERIES: ZL150 ZL153 SMC ZL15MC ZL15SM ZL200 SMC ZL203 SMC ZL250 ZL253MC ZL253 SMC ZL35 ZL35 SMC ZL45 ZL45M ZT SERIES: ZT1000Y ZT1500Y ZT1500YB ZT2500Y DMG GILDEMEISTER: CTX 320 CTX 410 CTX 500 ALPHA MF SPRINT 65 SPEED 32 LINEAR SPRINT 20-8 LINEAR SPRINT 65 LINEAR TWIN 42 LINEAR © 2013 Gibbs and Associates, a Cimatron Company. All rights reserved. The Gibbs and GibbsCAM logos, GibbsCAM, Virtual Gibbs and “Powerfully Simple. Simply Powerful.” are either trademark(s) or registered trademark(s) of Gibbs and Associates in the United States and/or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. This document is for informational purposes only and is subject to change. Gibbs and Associates, A Cimatron Company | Tel 805.523.0004 | 800.654.9399 | Fax 805.523.0006 | www.GibbsCAM.com