CX-Programmer Version Upgrade Software
Transcription
CX-Programmer Version Upgrade Software
CX-Programmer Version Upgrade Software (Ver.3.2->Ver.3.3) Installation Procedure ■Version Upgrade Flow The following shows the operation flow of upgrading the CX-Programmer version from Ver.3.2 to Ver.3.3 by using CX-Programmer Version Upgrade Software. 1) Checking the current CX-Programmer version ↓ 2) Downloading Version Upgrade Software ↓ 3) Executing Version Upgrade Software ↓ 4) Checking the upgraded version ■Checking the current CX-Programmer version Version Upgrade Software is dedicated for CX-Programmer Ver.3.2. Be sure to check the version of CX-Programmer installed in your computer. Programmer, select [Help] | [About CX-Programmer]. After starting CX- You can check the current version by the version of CX-P.exe. ■Downloading Version Upgrade Software 1. You need to copy Version Upgrade Software for upgrading CX-Programmer to version 3.3 into the hard disk of the computer where CX-Programmer Ver.3.2 is installed. Download either one of the following files to copy it to the hard disk of the computer where CX-Programmer Ver.3.2 is installed. CXP320_330E.exe If you want to copy Version Upgrade Software in the hard disk of your computer through a floppy disk, download the following divided files to copy them in the same directory of the hard disk where CX-Programmer Ver.3.2 is installed. CXP320_330EC.exe CXP320_330EC.001 Execute CXP320_330EC.exe among the above files, and CXP320_330E.exe is generated. Execute the generated file “CXP320_330E.exe”, and the following files are extracted. • data1.cab • data1.hdr • data2.cab • ikernel.ex_ • layout.bin • setup.exe • setup.ini • setup.inx Execute the file “setup.exe”, and the version upgrade starts. After the upgrade is completed, you can delete the directory and files. ■Executing Version Upgrade Software The operation of version upgrade after starting setup.exe is explained hereinafter. 1. The following dialog box shows up after starting Version Upgrade Software. 2. Click [Next]. The [License Agreement] dialog box shows up. 3. Read [License Agreement] carefully. Click [Yes] if you agree to all the terms and conditions. 4. The version upgrade program automatically upgrades the versions of CXProgrammer and CX-Server files installed in the specified folders. • After the version upgrade of CX-Programmer is completed, the following dialog shows up. Notice: CX-Programmer Ver.3.2 cannot be upgraded when installed in the root directory. Once uninstall CX-Programmer Ver.3.2 from the root directory, reinstall it to a different directory and then try upgrading. 5. Click [Complete]. • Now the version upgrade of CX-Programmer is completed. ■Checking the upgraded version After starting CX-Programmer, select [Help] | [About CX-Programmer] to check that the version of CX-P.exe is [3.3.0.1]. And then, click the [About] button to show the version information of CX-Server and check that the version is [1.7.4.3]. ■Trouble Shooting When the following dialog shows up during installation, CX-Programmer Ver.3.2 is not installed correctly. Check again whether CX-Programmer Ver.3.2 is installed in, and if installed, check the installation directory. After that, execute setup.exe again. When the following dialog shows up during installation, the version upgrade has not ended correctly. In this case, CX-Programmer Ver.3.2 may not be correctly installed or may be in use. Reinstall CX-Programmer, or restart your PC. After that execute setup.exe again. When the following dialog shows up during installation, CX-Server Ver.1.73 is not installed correctly. Check again whether CX-Server Ver.1.73 is installed in, and if installed, check the installation directory. After that, execute setup.exe again. When the following dialog shows up during installation, the version upgrade has not ended correctly. In this case, CX-Server Ver.1.73 may not be correctly installed or may be in use. Reinstall CX-Programmer, or restart your PC. After that execute setup.exe again. When the following dialog shows up during installation, the version upgrade has not ended correctly. In this case, CX-Programmer registry information may not be correctly or CX-Programmer may be in use. setup.exe again. Reinstall CX-Programmer, or restart your PC. After that execute ■ Uninstall The procedure for uninstalling programs related to CX-Programmer is explained hereinafter. To uninstall programs related to CX-Programmer, you need to delete the following applications: 1. • CX-Programmer v3.2 • CX-Programmer v3.3 Upgrade • CX-Server • CX-Server PLC Tools • another CX-Programmer Version Upgrade Select [Start] | [Settings] | [Control Panel] | [Add/Remove Programs]. The following [Add/Remove Programs] dialog shows up. 2. Select [CX-Programmer v3.3 Upgrade]. 3. Click [Add/Remove]. The following dialog shows up. 4. Click [OK]. Uninstallation starts. You cannot restore the former CX-Programmer or CX-Server version by this operation. The components added by Version Upgrade Software are deleted only. 5. After uninstallation is completed, click [Finish]. Go back to the [Add/Remove Programs Properties] dialog. 6. If another [CX-Programmer Version Upgrade] exists, uninstall it as well as [CXProgrammer v3.3 Upgrade]. 7. Select [CX-Programmer v3.2]. 8. Click [Add/Remove]. The [Confirm File Deletion] dialog shows up. 9. Click [OK]. Uninstallation starts. 10. After uninstallation is completed, click [OK]. Go back to the [Add/Remove Programs Properties] dialog. 11. Take the same procedure as that for [CX-Programmer v3.2] to uninstall [CX-Server] and [CX-Server PLC Tools]. Now uninstallation is completed. deleted from your computer. All the CX-Programmer and CX-Server files are If, however, you added new files or directories under the installation directory, the directory structure and added files under the installation directory remain after uninstallation. To delete all the information related to CX-Programmer and CX-Server from your computer, you need to delete all the files and directories under the installation directory after the uninstallation.