VESTE CUIR CROUTE FlamePro2
Transcription
VESTE CUIR CROUTE FlamePro2
France CODE ARTICLE: 4104932 VESTE CUIR CROUTE FlamePro2 Présentation générale Numéro de référence 4104932 Type de produit Vêtements de protection Gamme FlamePro2 Ligne Protection contre la chaleur et le feu Marque Sperian Industrie Industrie Transport Soudure Utilisation du produit Les vêtements de la gamme FlamePro2 sont conçus pour protéger les soudeurs contre de grosses projections de métaux en fusion. Résistants et durables, ils peuvent être portés seuls ou en complément de la gamme FlamePro1 pour les applications les plus risquées. Caractéristiques & Avantages Caractéristique Protection renforcée Avantage Les vêtements de la gamme FlamePro2 sont conçus pour protéger les soudeurs contre de grosses projections de métaux en fusion. Caractéristique Résistants et durables Avantage Ils peuvent être portés seuls ou en complément de la gamme FlamePro1 pour les applications les plus risquées. page 1 de 3 © Honeywell International Inc. VESTE CUIR CROUTE FlamePro2- 4104932 Descriptif technique Description Veste FlamePro2 avec col Mao en 100% coton ignifugé avec fermeture Velcro®. Fermeture par boutons pression avec rabat. Haut face et dos complet de la veste en 100% coton ignifugé :souplesse, légèreté et réfléchissant la chaleur. Serrage aux poignets par un bouton pression. Serrage aux poignets par un bouton pression pour s'adapter facilement et porter le gant confortablement. Sexe Unisex Taille M à XXL Tableau des tailles Taille internationale Tableau de correspondance Table size Couleur Gris/Bleu Composition Col, haut face et dos complet de la veste en 100% coton (360 g/m2) avec traitement ignifuge, le reste du vêtement en cuir croûte. Couture avec fils para-aramide Kevlar®. Type de protection n/a Performances EN 11611: 2007 (Class 2): Protective clothing used for welding and allied processes. Limites d’utilisation Attention shall be drawn to the hazards of improper use: The level of protection against flame will be reduced if the protective clothing is contaminated with flammable materials. An increase in the oxygen content of the air will reduce considerably the protection of the protective clothing against flame. Attention should be taken when welding in confined spaces, e.g. if it is possible that the atmosphere may become enriched with oxygen. The electrical insulation provided by clothing will be reduced when the clothing is wet, dirty or soaked with sweat. For operational reasons not all welding voltage carrying parts of arc welding installations can be protected against direct contact. The garment is only intended to protect against brief inadvertent contact with live parts of an arc welding circuit, and that additional electrical insulation layers will be required where there is an increased risk of electric shock. Avertissement Garments only protect the part of the body actually covered. The apron, sleeves and gaiters are elements of additional protection to be worn over the jacket/pans. For complete protection against risks faced by welders, it is necessary that PPE covered by other standards are worn in addition to protect the head, face, hands and feet. The user should not in any way remove clothes when it is still a work area at risk. Features indicated are guaranteed only if the garments are of the right size, are correctly worn, buckled up, and in a perfect conditions. Before use, visually check to make sure that equipment is clean, in perfect condition and they have not suffered damage. The manufacturer cannot be held responsible for any damages or consequences resulting from an incorrect use, or in case of modifications of the product. Certifications Déclaration de conformité CE EPI catégorie CE 2 Assurance qualité ISO 9001 / 2000 Numéro de certificat CE 0072/197/162/07/10/0065 Attestation CE EC Attestation Numéro d'attestation 0072/197/162/07/10/0065 Photos et images page 2 de 3 © Honeywell International Inc. VESTE CUIR CROUTE FlamePro2- 4104932 4104933 http://www.honeywellsafety.com/assets/0/324/1016/1020/f36ebf27-8434-4294-a56e-9237b6e00e3c.jpg Maintenance Cycle de vie Lavage NON autorisé. Traitement à l’eau de Javel NON autorisé. Séchage au tambour NON autorisé. Ne pas repasser. Lavage à sec NON autorisé Information de stockage Conserver le vêtement dans son emballage, dans un endroit frais et sec, non poussiéreux, à l'abri de la chaleur et de la lumière. Pour l'entretien, suivre scrupuleusement les instructions figurant sur l'étiquette. Instructions d’entretien Pour le lavage, lire attentivement les indications mentionnées dans le paragraphe cycle de vie © Honeywell International Inc. page 3 de 3 © Honeywell International Inc.