Imprimir - TEC Automatismes
Transcription
Imprimir - TEC Automatismes
RELAIS INSTANTANÉS ET DE FONCTION 4 contacts 1728 rear wiring socket with clips 9723 front wiring socket / screw terminals 9705 Otros modelos 1246 1301 1728 1753 1783 1804 1848 2246 2448 BA CAA 72 CAAI CARA CS GE Description Fast action instanteneous relay with magnetic arc blowing - 4 CO contacts. Pluggable on front wiring socket (9705) or rear wiring socket (9723) Detailed table of coil resistance data is available in the technical support pages of this site or can be sent upon request. Encombrement Raccordement Principe de fonctionnement The 1728 relay is a specially designed "'fast action relay" equipped with 4 x 10 A CO contacts. The basic design is made of two relays included in one relay dust cover : - one 1804 relay giving fast action < or = 4 ms of the 4 NO contacts (qualified EDF HN 45S25 cl. 2a) - one 1783 relay, with magnetic arc blowing, for heavy contacts characteristics (breaking capability) qalified EDF HN 45S25 cl. A1. Caractéristiques Fonction instantaneous fast action Présentation under cover Raccordement on front or rear wiring socket Nombre de manoeuvres mécaniques 1.000.000 Température de fonctionnement - 10 to + 55°C Température de stockage - 40°C to + 80°C Catégorie climatique reinforced climatic protection Tension de choc 4 KV wave 1,2/50 microseconds Rigidité diélectrique 2.500 V - 50 Hz - 1 mn. Résistance d'isolement 1.000 MOhms (500 VDC new relay) Masa 500 g. Bobine Courant continu Courant alternatif Tension nominale mini. 48 V Tension nominale maxi. 220 V Domaine d'action -20/+10% of nominal voltage Classe de puissance 6 W / 100 ms on operate - 4 W permanent Contactos Número de contactos 4 Courant permanent maxi. admissible 10 A per contact Surcharge de court-circuit admissible 100 A / 30 ms Temps de réponse (rebonds non-inclus) CT < 4 ms - CR < 20 ms Pouvoir de coupure COURANT CONTINU resistive load inductive load - L/R = 50 ms Diagramme de fonctionnement voir principe de fonctionnement Versions Contact us Document non-contractuel - Caractéristiques à se faire confirmer avant commande Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis