dentsply canada ltd. material safety data sheet/fiche

MSDS-071
DENTSPLY CANADA LTD. MATERIAL SAFETY DATA SHEET/FICHE SIGNALETIQUE
SECTION 1 - PRODUCT IDENTIFICATION AND USE/IDENTIFICATION ET UTILISATION DU PRODUIT
PRODUCT IDENTIFIER/
PRODUCT IDENTIFICATION NUMBER (PIN)/
686001-002, 686004-006, 686031, 686034,
NOM/IDENTIFICATEUR DU PRODUCT
LUCITONE CHARACTERIZED
DENTURE BASE RESIN
686042-046, 686054-056, 686120, 686123124, 686130, 686133-134, 686140, 686143-144, 686371-373, 686376, 686386.
NUMERO D'IDENTIFICATION DU PRODUIT (NIP)
PRODUCT USE
Dental
USAGE DU PRODUIT
MANUFACTURER'S NAME/NOM DU FABRICANT
SUPPLIER'S NAME/NOM DU FOURNISSEUR
DENTSPLY Trubyte
DENTSPLY Canada Ltd.
STREET ADDRESS/NUMERO CIVIQUE
STREET ADDRESS/NUMERO CIVIQUE
570 West College Ave.
161 Vinyl Court
PROVINCE
CITY/VILLE
CITY/VILLE
Pennsylvania
York
POSTAL CODE POSTAL
EMERGENCY TELEPHONE NO. D'URGENCE
17405-0872
PROVINCE
Woodbridge
Ontario
POSTAL CODE POSTAL
1-800-424-9300
EMERGENCY TELEPHONE NO. D'URGENCE
(905) 851-6060 or
1-800-263-1437
FAX# (905) 851-9809
L4L 4A3
SECTION 2 - HAZARDOUS INGREDIENTS/INGREDIENTS DANGEREUX
HAZARDOUS INGREDIENTS/INGREDIENTS DANGEREUX
%
CAS NUMBER/
TLV
5 mg/m3
NUMERO CAS
Benzoyl Peroxide
< 0.2
94-36-0
OSHA PEL
5 mg/m3
SECTION 3 - PHYSICAL DATA/CHARACTERISTIQUES PHYSIQUES
PHYSICAL STATE/ETAT
Chemical Family:
ODOUR AND APPEARANCE/ODEUR ET APPARENCE:
PHYSIQUE
Powder
Acrylic polymer
Pink free flowing powder with faint odour in bulk.
VAPOUR PRESSURE (mm Hg)/
VAPOUR DENSITY (AIR-1)/
EVAPORATION RATE/
o
BOILING POINT ( C)/
o
FREEZING POINT ( C)
TENSION DE VAPEUR (mm Hg)
DENSITE DE LA VAPEUR (AIR-1)
TAUX D'EVAPORATION
o
POINT D'EBULLITION ( C)
o
POINT DE CONGELATION ( C)
N.A.
N.A.
pH:
N.A.
N.A.
N.A.
SOLUBILITY IN WATER:
SPECIFIC GRAVITY/DENSITE:
N.E.
Insoluble.
SECTION 4 - FIRE AND EXPLOSION DATA/RISQUES D'INCENDIE OU D'EXPLOSION
FLAMMABILITY/INFLAMMABILITE
YES/OUI
_
NO/NON
X
IF YES, UNDER WHICH CONDITIONS?
SI OUI, DANS QUELLES CONDITIONS?
MEANS OF EXTINCTION/MOYENS D'EXTINCTION:
Water, carbon dioxide, dry chemical, halon. Avoid extinguishing methods which may generate dust clouds.
o
FLASHPOINT ( C) AND METHOD/
o
POINT D'ECLAIR ( C) ET METHODE DE DETERMINATION
UPPER EXPLOSION LIMIT (% BY VOLUME)
LOWER EXPLOSION LIMIT (% BY VOLUME)
SEUIL D’EXPLOSIVITE MAXIMAL (% PAR VOLUME)
SEUIL D’IEXPLOSIVITE MINIMAL (% PAR VOLUME)
300°C
N.A
o
AUTO-IGNITION TEMPERATURE ( C)/
HAZARDOUS COMBUSTION PRODUCTS/
o
TEMPERATURE D’AUTO -INFLAMMATION ( C):
PRODUITS DANGEREUX DE COMBUSTION:
N.A
Water stream can disperse dust in air, producing a fire hazard and possible
explosion hazard if exposed to ignition source. Polymer dust is combustible.
N.A
SENSITIVITY TO IMPACT/SENSIBILITE A L'IMPACT MECANIQUE
EXPLOSION DATA/
SENSITIVITY TO STATIC DISCHARGE
SENSIBILITE A UNE DECHARGE STATIQUE
N.A
DONNES SUR LES EXPLOSIONS
N.A
SECTION 5 - REACTIVITY DATA/DONNES SUR LA REACTIVITE
CHEMICAL STABILITY/STABILITE CHIMIQUE
YES/OUI :
X
NO/NON
_
IF NO, UNDER WHICH CONDITIONS?
Avoid heat above 200°C.
SI NON, DANS QUELLES CONDITIONS?
INCOMPATIBILITY WITH OTHER SUBSTANCES/
INCOMPATIBILITE AVEC D'AUTRES PRODUITS
YES/OUI :
X
NO/NON
_
IF SO, WHICH ONES?
Strong oxidizing agents.
SI OUI, LESQUELS?
REACTIVITY, AND UNDER WHAT CONDITIONS?/CONDITIONS DE REACTIVITE
Avoid temperature above 300°C due to polymerization
HAZARDOUS DECOMPOSITION PRODUCTS/PRODUITS DE DECOMPOSITION DANGEREUX
Methylmethacrylate and Carbon m onoxide.
1
MSDS-071
DENTSPLY CANADA LTD. MATERIAL SAFETY DATA SHEET/FICHE SIGNALETIQUE
PRODUCT IDENTIFIER/
NOM/IDENTIFICATEUR DU PRODUIT
LUCITONE CHARACTERIZED DENTURE BASE RESIN
SECTION 6 - TOXICOLOGICAL PROPERTIES/PROPRIETES TOXICOLOGIQUES
ROUTE OF ENTRY/VOIES D'ABSORPTION
SKIN CONTACT/
_
SKIN ABSORPTION/
CONTACT DERMIQUE
_
ABSORPTION DERMIQUE
X
EYE CONTACT/
INHALATION
X
INGESTION
_
CONTACT OCULAIRE
EFFECTS OF ACUTE EXPOSURE TO PRODUCT/EFFETS DE L'EXPOSITION AIGUE AU PRODUIT
May cause eye and skin irritation. Product is considered a nuisance dust.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT/EFFETS DE L'EXPOSITION CHRONIQUE AU PRODUIT
N.E.
EXPOSURE LIMITS/
IRRITANCY OF PRODUCT/
SENSITIZATION TO PRODUCT/
CARCINOGENICITY/
SEUILS LIMITES D'EXPOSITION
PROPRIETE IRRITANTE
SENSIBILISATION AU PRODUIT
CANCEROGENICITE
Dust 10 mg/m 3
TERATOGENICITY/
TERATOGENICITE
N.A.
N.A.
REPRODUCTIVE TOXICITY/
N.A.
EFFETS SUR LA REPRODUCTION
N.A.
MUTAGENICITY/
N.A.
MUTAGENICITE
SYNERGISTIC PRODUCTS/
N.A.
PRODUITS SYNERGIQUES
N.A.
SECTION 7 - PREVENTIVE MEASURES/MESURES PREVENTIVES
PERSONAL PROTECTIVE EQUIPMENT/MATERIEL PERSONNEL DE PROTECTION
Protective gloves, glasses, and apron.
GLOVES (SPECIFY)/GANTS (PRECISER):
RESPIRATOR (SPECIFY)/APPAREIL RESPIRATOIRE (PRESICER)
Protective gloves if hot plastic is
handled.
FOOTWEAR (SPECIFY)/CHAUSSURES (PRECISER)
EYE (SPECIFY)/APPAREIL OCULAIRE (PRECISER):
Nuisance dust type, if needed.
CLOTHING (SPECIFY)/VETEMENTS (PRECISER)
N.A.
Safety glasses.
OTHER (SPECIFY)/AUTRES (PRECISER)
Rubber apron.
N.A.
ENGINEERING CONTROLS (SPECIFY, EG, VENTILATION, ENCLOSED PROCESS)/INSTALLATION TECHNIQUES
Local exhaust at processing equipment.
LEAK AND SPILL PROCEDURE/PROCEDURES EN CAS DE FUITES ET DE DEVERSEMENTS
Sweep up to avoid slipping hazard. Keep airborne particulate at a minimum when cleaning up spills.
WASTE DISPOSAL/ELIMINATION DES RESIDUS:
May be disposed of in landfill or incinerated. Follow Federal, State, and Local regulations for disposal.
HANDLING PROCEDURES AND EQUIPMENT/METHODES ET EQUIPEMENT POUR LA MANUTENTION:
Observe normal warehouse handling procedures.
STORAGE REQUIREMENTS/EXIGENCES EN MATIERE D'ENTREPOSAGE:
Store in cool dry place. Keep container closed to prevent water absorption and contamination. Store away from food and
beverages.
SPECIAL SHIPPING INFORMATION/RENSEIGNEMENTS SPECIAUX EN MATIERE D'EXPEDITION
N.A.
SECTION 8 - FIRST AID MEASURES/PREMIER SOINS
SPECIFIC MEASURES/PREMIERS SOINS PARTICULIERS A ADMINISTRER
Eyes:
Skin:
Ingestion:
Inhalation:
Flush immediately with water for 5 minutes, including under the eyelids.
(Irritation). Wash with soap and water.
Rinse mouth with water. Call doctor if the amount was large.
Remove to fresh air. Get medical help if discomfort persists.
SECTION 9 - PREPARATION DATE OF MSDS/RENSEIGNEMENTS SUR LA PREPARATION DE LA FS
PREPARED BY (GROUP, DEPARTMENT, ETC.)/
PHONE NUMBER/NO. DE TELEPHONE
DATE
PREPAREE PAR (GROUPE, SERVICE, PERSONNE, ETC.)
Cadentrix
(416) 994-9356
Rev. 1
1 June 2005
The statements contained herein are offered for informational purposes only and are based upon technical data that Dentsply Ltd.
believes to be accurate. It is intended for use only by persons having the necessary technical skill and at their own discretion and
risk. Since conditions and manner of use are outside our control, we make no WARRANTY, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, and FITNESS OR OTHERWISE.
2