Universal Modular Furniture Plate Instructions

INS_100.19544_00_B_B 2/13/15 2:36 PM Page 1
Universal Modular Furniture Plate Instructions
MX-UMA-(XX)
CT-UMA-(XX)
Required
Optional
Tools
Funiture Panel
Openings
Max
1.75” x 3”
(44.4 x 76mm)
B
Typical Orientation for
angled outlet mounting
MX only.
A
A
2
1
Min
1.3” x 2.625”
(33 x 67 mm)
Typical Orientation
for flat MX outlet
mount & CT plate.
B
< OR >
4
3
NOTE: Engage latches in order as
shown. For best fit, press bracket flat &
tight against panel while bending tabs
being careful not to deform the plate
latches.
Optional procedures
for a more secure fit.
INS_100.19544_00_B_B 2/13/15 2:36 PM Page 2
Universal Modular Furniture Plate Instructions
< OR >
1
(See Note)
2
5
NOTE: Refer to applicable outlet instructions for
termination and mounting details. Most outlets
can be loaded from both front & rear.
3
xx xx xx xx
A. Use caution when installing or modifying telecommunications circuits.
Cover Removal
B. Never touch uninsulated wire terminals unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
2x
Lors de l'installation, respectez les consignes de sécuritésuivantes:
A. Utiliser avec prudence lors de l'installation ou de la modification circuits de télécommunications.
B. Ne jamais toucher les bornes de fil métallique non isolés sauf si le circuit a étédébranché.
C. Ne jamais installer cet appareil dans un endroit humide.
D. Ne jamais installer pendant un orage.
(Either Side)
8
For a complete listing of our global offices and contact
information. visit www.siemon.com
www.siemon.com
© 2015 Siemon
To assist safe installations, comply with the following:
INS_100.19544.00_Rev_B (Universal Mod Furn Adapter)
7
6