Spec Sheet LS-0602-03

3D TM
Lenticular Lens Sheets
Micro Lens Technology, Inc. 3D TM Lenticular Lens Sheets offer dramatic perceived depth over
typical animation lenticular sheets. 3D TM Lenticular Lens Sheets are available in four different
LPIs to help you create the ultimate 3D image for your specific product application. Amplify the
depth of your next image by a factor of 3D.
LPI
(Lens Per Inch)
Gauge/Thickness
Material
Recommended
Viewing Distance
Viewing Angle
Standard Sizes
(width x height)
Custom Sizes
Pre-applied
Adhesive
3D TM
3D15
15
3D TM
3D20
20
3D TM
3D40
40
3D TM
3D60
60
0.250 in
0.150 in
0.082 in
0.048 in
(6.35 mm)
(3.81 mm)
(2.08 mm)
(1.22 mm)
Acrylic
Acrylic
PETG
PETG, APET
10 + ft
5-20 ft
3-15 ft
1-5 ft
(3.0 + m)
(1.5-6.1 m)
(0.9-4.6 m)
(0.3-0.9 m)
22°
29°
25°
24°
8” x 10”(3D40 and 3D60), 16” x 20”, 22” x 28”, 32” x 42”, 36” x 48”
48” x 72”, 48” x 74”(3D20 and 3D40), 48” x 96”(3D20 and 3D40)
Available upon request.
Available upon request.
To order Micro Lens Technology 3D TM Lenticular Lens Sheets, please contact:
Micro Lens Technology, Inc.
2001 Van Buren Avenue
Indian Trail, NC 28079 (USA)
Phone: 704-893-2109 Fax: 704-893-2107
www.microlens.com
* The product specifications listed above are provided as a guide to the user and may change at any time without notice to the
user. The user of the product listed above shall be responsible for determining if it will meet the requirements of its intended use.
The product specifications listed above do not constitute a warranty by Micro Lens Technology, Inc.
© 2007 Micro Lens Technology, Inc.
Micro Lens Technology, the Micro Lens Technology, Inc. Logo, and 3D are trademarks of Micro Lens Technology, Inc.
September 2007
LS-0602-03