MEDMASTER™ Darkroom Luminaires

PROJECT INFORMATION
MEDMASTER™
Darkroom Luminaires
Job Name
Fixture Type
MDRM SERIES
Catalog Number
Approved by
PRODUCT FEATURES:
»» Ceiling mount – recessed flange or grid
and surface mount
»» 1, 2 or 3 compartments
»» UL certified IP65 rated for cleanability
GRID
FLANGE
SURFACE
SPECIFICATIONS
HOUSING: 20-gauge CRS. Hole-free one-piece seam welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
DOORFRAME: 18-gauge CRS. One-piece inset construction with welded corners. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Doorframe secured to
housing with continuous hinge and captive mounted Phillips-head stainless steel fasteners.
LENS: C73 tempered glass standard (Non filtered compartment).
DOORFRAME GASKET: Silicone gasket seals doorframe to housing.
ELECTRICAL: Maximum lamp wattage for filtered compartment 15 watts. Maximum lamp wattage for non filtered compartment 150 watts (A-21) (MDRMG2 and MDRMG3). Lamps by others.
Prewired at factory for easy installation. Medium base porcelain socket.
INSTALLATION: GRID MOUNT:1.0"& 1.5" T-Bar installation standard. Consult factory for custom T-Bar ceilings. FLANGE MOUNT: Recessed flanged adjustable swing-out mounting brackets
standard. SURFACE MOUNT: Four .312" holes for surface mounting.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598.
IP65
ORDERING INFORMATION (Ex:MDRMG-2-120-1)
Model
Compartments
Voltage
Model
MDRMG Grid Mount
MDRMF Flange Mount
MDRMS Surface Mount
Compartments
1
One Compartment (15 Watt Max.)
2
Two Compartments
3
Three Compartments
Filters
Options
Filters
1Red
2
Dark Red
3
Dark Green
13Amber
GBX2Red (Blue and Green Sensitive)
Options
FS Fuse & Holder
TP Tamper Proof
TC TBar clips (grid only)
120
Voltage
120 120 Volts
www.kenall.com
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
MDRM_F_G_S-011514
For additional photometry, go to www.kenall.com
MEDMASTER™
Darkroom Luminaires
MDRM SERIES
DIMENSIONAL DATA
1 COMPARTMENT
Grid
2 COMPARTMENTS
E
C
B
G
E
D
D
A
F
(4) .312" Surface
Mounting Holes
Flange
B
3 COMPARTMENTS
E
A
1.50" min.
4.00" max.
Surface
D
B
A
DIMENSIONAL DATA (IN INCHES)
CROSS VIEW
A
B
C
Grid 6.0010.60 11.75
1 Compartment
2 Compartments
3 Compartments
Flange
6.0010.60 n/a
1 Compartment
2 Compartments
3 Compartments
Surface
6.0010.60 n/a
1 Compartment
2 Compartments
3 Compartments
D
E
CEILING CUT-OUT
11.7511.75
11.7523.75
11.7535.75
11.75
11.75
11.75
23.75
11.7535.75
10.875 × 10.875
10.875 × 22.875
10.875 × 34.875
10.6010.63
10.6022.63
10.6034.63
MOUNTING HOLE TEMPLATE – SURFACE MOUNT
(IN INCHES)
F
1 COMPARTMENT6.00
2 COMPARTMENTS6.00
3 COMPARTMENTS6.00
www.kenall.com
P: 800-4-Kenall
G
7.63
19.63
31.63
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
MDRM_F_G_S-011514