IS-775 - TOPCON Connecting Visions
Transcription
IS-775 - TOPCON Connecting Visions
Delta ophthalmic unit IS-775 CONNECTING VISIONS Delta instrument stand for three instruments IS-775 Unit Base Both right and left units are available with tabletop elevation. Combination of two smooth and fast acting movements of tabletop (both rotation and sliding) which operate with electro-magnetic brake to place each instrument in the correct position. Control panel with an easy access. Wheel chair access possibility (factory option) Various Equipped with an aluminium made pole to support the optional accessories are available for creating your ideal LED reading lamp, phoropter arm and projector arm. All setup such as several holders for power supplies of adaptable in height and position. phoropter and slitlamp flash, two types of desks and an optional arm for a fourth instrument. Resistant base for the chair protected against scratches by a plastic polyurethane cover. Selection of wooden finishes are available. Superb cabling for data and power cables. Dedicated glass plate for customer frames. Standard trial lens drawer. Arm and tabletop Arm support for the tabletop made in aluminium with rotation and sliding system and electrobrake. Tabletop for three instruments and additional arm for a fourth instrument as an option. Choice out of tabletop with trial lens drawer, tabletop with free drawer or tabletop with no drawer. Chinrest support for the slit lamp. Security device for patient legs under the tabletop. VT 73 VT 670 VT 671 Phoropter arm Choice out of three phoropter arms with regulation for different weights (4.5-10 Kg) and adjustable in force, horizontal & vertical position and direction. VT-73 lineal movement phoropter arm with right/left rotation for especially computerized phoropter CV-5000 VT-670 with mechanical lock. VT-671 with automatic balancing system. Pole and main lamp Made from extruded aluminium with side slots to attach the projector and phoropter arms, both height adjustable. The room illumination lamp is attached to the upper part of the pole. LED reading lamp The adjustable LED reading lamp provides clear illumination of reading tests. Options Main unit available in left or right versions and different OC-72 base plate with wheels (can be moved in case of colours of finishing sets. wheel chair set up) Choice out of three different upholstery colours at the OC- Choice out of three different phoropter arms: chairs (OC-70/72/76): black, blue or grey. VT-670 / VT-671 / VT-73 PC desk Trial lens drawer with PC housing Desk unit, keyboard tray and CPU support. Arm for fourth instrument Holder for CV power Holder for CV power & FD-21 Furniture colour options Different finishing sets; the IS-775 unit is available in two paint colours and three types of wood When configuring the unit, a finishing set option is available for the table top, base cover and standard trial lens drawer in standard white and light blue colours, or maple, cherry and sapelli wood finish. Maple wood Cherry wood Sapelli wood Blue painted White painted Chair colour options OC-72 • Three basic models; - OC-70 (fixed back, reclinable armrest, optional footrest) - OC-72 (fixed back, optional footrest) - OC-76 (fully reclining, reclinable armrest, including • footrest, horizontal replacement) Movement system to allow wheelchair access as an option for the OC-70 and OC-72 • Low starting position of the chair enabling easy access for children and smaller patients • Available in three colours; black, blue and grey Black Grey Blue Wheel chair access IS-775 ISO 6385: 1981 Ergonomic principles in the design of work systems Specific features: ISO 7176-5: 1986 1The wheel chair version is a factory option Wheelchairs. Part 5. Determination of overall dimensions, 2Only available in right version of unit in combination mass and turning space. with OC-70 / OC-72 chair. 3Unit stability is guaranteed by optional extra weight or ISO 9241-1/A1: 2002 fixation to the floor. Part 1. Ergonomic requirements, general introduction. 4Designed according to ISO standards for wheelchair configuration: ISO 14971. This norm applies to both the ISO 9241-5: 1999 unit and wheelchair. Part 5. Conception to the workplace and postural requirements. Besides this standard, we have taken ergonomic principles and dimension issues in consideration. We enclose the ISO 9241-1: 1997 following norms: Ergonomic principles for office workplaces with Data display devices. ISO 6440: 1985 & UNE 111-913-91 Nomenclature and features about wheel chairs. ISO 14971: 2000 Application to Risk management to medical devices. ISO 7193: 1985 & UNE 111-914-91 & UNE 111-915-91 Dimensions about wheel chairs. 1 3 5 7 9 11 4 6 8 10 12 13 2 Functions of the main panel 1 Unit Lamp regulation control with a without end 7 Push button for lifting up chair. It is deactivated digital encoder and equipped with electronic soft- when the security system is active. start system to protect the bulb. 0-230V / 50Hz, 8 Push-button for descending chair. A fast double max 250W power supply for overhead lamp. pulsation, pressing twice make descend chair 2 Lecture Lamp regulation control with a without end automatically to the repose position. digital encoder and equipped with electronic soft- 9 Switch ON/OFF for auxiliary connection AUX-1, start system to protect the bulb. free of potential, max 250 Vac / 250 VA. 3 Push button for opening the curtain. 10 Switch ON/OFF for auxiliary connection AUX-2, 4 Push button for closing the curtain. output power supply 230Vac/50Hz, max 250 VA. 5 Push button for lifting up tabletop. The green led indicates the function is activated. 6 Push button for descending tabletop. It is de- 11 Switch ON/OFF for Lecture lamp. activated when the security system placed in the 12 Switch ON/OFF for projector 230 Vac / 250 VA. inferior part of the table top to protect patient legs is activated. 13 General switch ON / OFF for power supply. The green led indicates the function is activated. The green led indicates the unit is activated. Technical specifications of the unit IS-775 Power consumption 220-240 V ac / 50-60Hz Maximum Consumption 1300 VA Electrical classification Class I, Type B Electrical protection degree IP21 Max. rotation angle swivel tabletop 320º DEG Power consumption for instruments 0-12 V ac / 30 W Background Lamp Consumption 5 V ac / 100 mA Curtains: Contacts free of potential on Auxiliary PCB Max 230 V ac / 5A Maximum load on phoropter arm VT-73 / VT-670 / VT-671 4,5 to 10 Kg. Maximum load of instruments on each tabletop 20 Kg Net weight 222 kg PC desk 630 x 600 x 780 mm Arm for fourth instrument 360 x370 x 860 mm Desk 1210 x 600 x 780 mm Trial lens drawer and PC 600 x 600 x 780 mm Holder CV power & FD-21 565 x 430 x 340 mm Holder CV power 565 x 430 x 175 mm Technical specifications of the chairs Chair OC-70 OC-72 OC-76 Reclining back No No 90° (fully) Foldable armrest Yes Not available Yes Footrest Optional (Grey) Optional (Grey) Yes (Grey) Horizontal displacement (100mm) Optional (R/L) Optional (R/L) Yes Footswitch Optional Optional Optional Color chair Grey / Blue / Black Grey / Blue / Black Grey / Blue / Black Color Column cover Grey Grey Grey Base plate Available in Grey Available in Grey Available in Grey Wheelchair base plate Available in Grey Available in Grey Not possible Maximum height (on platform) 620 mm 620 mm 660 mm Minimum height (on platform) 450 mm 450 mm 490 mm Horizontal rotation 80° 80° 76° Maximum load capacity 175 Kg 175 Kg 175 Kg Capacity/consumption (max) 700 W 700 W 700 W Power 230V AC/50-60 Hz 230V AC/50-60 Hz 230V AC/50-60 Hz Electrical Protection Degree IP21 IP21 IP21 Overload Thermal Protection 135° 135° 135° Electrical Classification Isolation Class 1 B Class 1 B Class 1 B Net weight 37 Kg 36 Kg 54 Kg ISO 13485:2003 CERTIFICATED FIRM UNE-EN-ISO 9001 CERTIFICATED FIRM Subject to change in design and/or specifications without advanced notice. Topcon España S.A. Topcon Deutschland GmbH Topcon (Great Britain) Ltd. Essebaan 11; 2908 LJ Capelle a/d IJssel; P.O. Box 145; 2900 AC Capelle a/d IJssel; The Netherlands Phone: +31-(0)10-4585077; Fax: +31-(0)10-4585045 E-mail: [email protected]; www.topcon.eu HEAD OFFICE; Frederic Mompou, 4; 08960 Sant Just Desvern; Barcelona, Spain Phone: +34-93-4734057; Fax: +34-93-4733932 E-mail: [email protected]; www.topcon.es Hanns-Martin-Schleyer Strasse 41; D-47877 Willich, Germany Phone: (+49) 2154-885-0; Fax: (+49) 2154-885-177 E-mail: [email protected]; www.topcon.de Topcon House; Kennet Side; Bone Lane; Newbury Berkshire RG14 5PX; United Kingdom Phone: +44-(0)1635-551120; Fax: +44-(0)1635-551170 E-mail: [email protected]; www.topcon.co.uk Topcon Danmark Topcon Italy Topcon Portugal Topcon Ireland Praestemarksvej 25; 4000 Roskilde, Danmark Phone: +45-46-327500; Fax: +45-46-327555 E-mail: [email protected] www.topcondanmark.dk Viale dell’ Industria 60; 20037 Paderno Dugnano, (MI) Italy Phone: +39-02-9186671; Fax: +39-02-91081091 E-mail: [email protected]; www.topcon.it Rua da Forte, 6-6A, L-0.22; 2790-072 Carnaxide; Portugal Phone: +351-210-994626; Fax: +351-210-938786 www.topcon.pt Unit 276, Blanchardstown; Corporate Park 2 Ballycoolin; Dublin 15, Ireland Phone: +353-18975900; Fax: +353-18293915 E-mail: [email protected]; www.topcon.ie Topcon Scandinavia A.B. Topcon S.A.R.L. Topcon Polska Sp. z o.o. Neongatan 2; P.O. Box 25; 43151 Mölndal, Sweden Phone: +46-(0)31-7109200; Fax: +46-(0)31-7109249 E-mail: [email protected]; www.topcon.se HEAD OFFICE; 89, rue de Paris; 92585 Clichy, France Phone: +33-(0)1-41069494; Fax: +33-(0)1-47390251 E-mail: [email protected]; www.topcon.fr ul. Warszawska 23; 42-470 Siewierz; Poland Phone: +48-(0)32-670-50-45; Fax: +48-(0)32-671-34-05 www.topcon-polska.pl TOPCON CORPORATION 75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan. Phone: 3-3558-2523/2522 Fax: 3-3960-4214 www.topcon.co.jp Item code: 5212011 / printed in Europe / 11.09 In order to obtain the best results with this instrument, please be sure to review all user instructions prior to operation. Topcon Europe Medical B.V.