Untitled - S3 amazonaws com

Transcription

Healthcare
Laundry
Retail/
Kiosk
55
Changegivers
29
GENIUS
payment systems
9
OSCAR
payment systems
102
Hoppers
65
Coin validators
55
Changegivers
29
GENIUS
payment systems
104
Minihoppers
89
Banknote readers
65
Coin validators
55
Changegivers
102
Hoppers
125
Condom dispensers
113
Changemachines
65
Coin validators
89
Banknote readers
139
EASY CASH payment
systems
3
TABLE OF CONTENTS
Fields of application of the main products categories . ............................................................................................... 2-3
Key to pictograms..................................................................................................................................................... 6-7
• .
• .
• .
• .
• .
• .
• .
• .
• .
• Six.
• JEDY.
• .
PAYMENT SYSTEMS
• Contactless electronic key payment systems................................................................................................... 9-47
•OSCAR series and accessories .....................................................................................................................9-27
•SOFTWARE-AUDITVIEW.................................................................................................................................. 23
•GENIUS series and accessories...................................................................................................................29-40
•FLASH series and accessories ....................................................................................................................41-46
•Palmtop data collection system (for OSCAR, GENIUS, and FLASH series) .................................................... 47
• Payment and control system for “OCS” machines . .........................................................................................49-52
•SENTINEL “smart card” payment system ....................................................................................................50-51
•OCS CONTROL identification system for control and management................................................................. 52
• Card payment system ................................................................................................................................. 53-54
•Mini-obliterators ................................................................................................................................................. 53
•Obliterators ........................................................................................................................................................ 54
• Coin payment system (changegivers) and accessories ................................................................................... 55-62
.•.....................................................................................................................................................................
Six
56
•series.
JEDY..................................................................................................................................................57-60
•NPS - Network Payment Solution (wireless system)......................................................................................... 63
• .
• .
• .
• .
• Commercial comparative tables
•Table for OSCAR series .................................................................................................................................... 18
•Table for GENIUS series ................................................................................................................................... 33
•Table for FLASH series ..................................................................................................................................... 43
•Table for changegiver systems .......................................................................................................................... 61
• . • .
COIN AND CARD VALIDATORS...........................................................................................................................65-88
•Comparative table 5” / 3,5” ................................................................................................................................ 70
•GIODY/GIODY LITE comparative table ............................................................................................................ 73
• . • .
• .
BANKNOTE READERS
•“JCM” series..................................................................................................................................................90-91
•“ICT” series....................................................................................................................................................92-95
•Universal smart/chip card reader ...................................................................................................................... 96
TRIO, integrated payment unit . ......................................................................................................................97-99
4
• .
• .
HOPPERS
HOPPER
•
MULTISIZE HS and HPRO and accessories............................................................................102-103
•MINIHOPPER F1S, F1PRO and F1M and accessories............................................................................104-106
MOTOR DISPENSERS AND SILOS
• MOTOR DISPENSER MD-100.
• .
•........................................................................................................................
MOTOR DISPENSER MD-100
108
•Adjustable silos................................................................................................................................................. 109
CCTALK UNIVERSAL TESTER.................................................................................................................................110
BUTTONS AND ACCESSORIES for video games....................................................................................................... 111-112
• .
• .
• .
• .
• .
CHANGEMACHINES
SELF
•
STATION CHANGE line......................................................................................................................... 114
•MINI SELF STATION CHANGE line................................................................................................................. 116
•COIN STATION SLIM NEW Line . ................................................................................................................... 118
•DM series.................................................................................................................................................. 119-121
•Accessories for Changemachines.............................................................................................................122-123
• .
• .
AUTOMATIC VENDING MACHINES
•Card dispenser (ISO standard)......................................................................................................................... 126
•Condom dispensers.......................................................................................................................................... 127
ACTIVATION MACHINES
•SELF STATION line...................................................................................................................................130-131
•TELE SELF line.........................................................................................................................................132-134
•MINI SELF STATION Line ........................................................................................................................135-136
•Accessories for activation machines.........................................................................................................137-138
• .
• .
• .
• .
• EASYCASH TOWER.
• EASYCASH LITE.
PAYMENT STATIONS
.•......................................................................................................................................
EASYCASH TOWER
140
.............................................................................................................................................
• EASYCASH LITE
141
Conditions of sale....................................................................................................................................................143
5
Key to pictograms
Display connection for displaying credit and
diagnostics
Palmtop Win CE system management
Palmtop
Display
Portable device for updating firmware and
system configuration
SIB
Expandable system with GSM/GPRS Modem
board
GSM/GPRS
Service key for AUDIT interface and system
configuration
Data Key
Expandable system with Wireless network
board
Wireless network
Service key for AUDIT interface and system
configuration
GENIUS Superkey
Possibility of managing credit, using cellphone
identification
Cashless Cellphone
Configuration and programming of the system
using DIP Switches
DIP SWITCH
Promotional sales managed on the basis of
times
Prices for times
Clock and calendar integrated in system, to
manage times and promotional sales
Clock/Calendar
Available coin channels
Coins channels
Optical IrDA, integrated in the Cashless
Reader or external interface
IrDA
Economic version of the system
Cost savings
Black List for the management of lost keys
Black List
System security
Security
Memorization of system accounts using
EVA-DTS standard, also in full format
AUDIT
Standard data connection between computer
and PC card
USB
Connection for “EYE” Display, displaying
customized text and images
EYE display
6
Laser Check
LASER CHECK
Standard serial protocols available for
connection to Automatic Vending Machines
Connection of a banknote reader in different
operating modes
Banknote reader
Protocols
Operating mode available for connection to
Automatic Vending Machines
Connection of a coin validator, using Standard
12VDC
Coin validator
Operating Mode
Connection of a coin validator, using Standard
24VDC
Technologies available for GENIUS key
GENIUS Key
Coin validator
Technologies available for the key
Contactless Key
Connection to a changegiver system
Changegiver
Device for dispensing coins of various diameters, thicknesses and value
Technologies available for chip-card
Chip-card
Multisize
Connection of peripheral devices using MDB
Slave serial protocol
Technologies available for Mifare card
MDB peripheral
devices
Card
Portable programming device for OSCAR,
JEDY, GIODY, JF, CV systems
Card using GENIUS technologies
P3000
GENIUS card
CPU electronics separate from Cashless
Reader
Portable programming device for FLASH
systems
Programming device
Separate electronics
Innovative communication protocol used
between different types of machines and
peripheral devices
GENIUS
Management of the system using Personal
Computer
Coin Hopper with Twin connection system
HOPPER
Portable programming device for GENIUS
systems
PC
7
Notes:
8
PAYMENT SYSTEMS
CONTACTLESS ELECTRONIC KEY PAYMENT SYSTEMS
OSCAR SERIES
VENDING
GAMING
CAR WASH
LAUNDRY
RETAIL/KIOSK
OSCAR
The OSCAR series is one of most advanced systems
in the Cashless contactless sector thanks to its
practical and aesthetic characteristics. A compact
payment system, with an electronic unit that can
dialogue with every existing protocol, which probably
has the highest number of useable functions available, for optimal vending management with
contactless keys or Mifare keys and card in large
Free Standing Vending Machines.
• Prepayment of sales
• 20% - 40% increase in sales
PAYMENT SYSTEMS
9
Contactless electronic key payment systems --› OSCAR series
OSCAR
Cod. OS801EU8080..........................................................
Cod. OS801EU8070..........................................................
Cod. 0S000008410..........................................................
Cod. OS000008400..........................................................
Key/card reader
Complete Executive Euro OSCAR system with IrDA
Complete Executive Euro OSCAR system
OSCAR key reader with IrDA and cable
OSCAR key reader with cable
Radio frequency Cashless System for contactless key (transponder technology).
CPU and key reader (also available with integrated Optical IrDA).
Connects to electronic Automatic Vending Machines with Executive BDV001, MDB
serial Protocols; connectors for banknote reader envisaged also as standard as well as
connection to 24VDC coin validator.
The EYE Display can be connected (for displaying various images and texts, product
information, adverts, etc.). Expandable with ECB1 card (GSM/GPRS modem board,
Zigbee wireless network, Cashless Cellphone).
The system can be configured using a PC, palmtop, via Optical IrDA, or with the P3000
portable programming device.
The AUDIT management (EVA-DTS standard protocol) envisages two data transfer
modes: in standard or Full AUDIT format (over 4,000 detailed operations per user
code); compatible with “Audit View” management system. The data can be transferred
via Optical IrDA, via RS232/USB cable (with PC or palmtop), or using the Data Key.
Power input
24V AC/DC nom.; from 18.5V to 42V DC max power 1W nom.; 6W max (coin validator on)
Overall dimensions
Key reader:
- casing Ø 35 x 70 mm, front plate 50 x 70 x 11 mm
- weight 50 g
CPU Box:
- 120 x 110 x 24 mm
- weight 110 g
CPU unit
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
- MDB RS232
Operating modes
- loader
Contactless key:
- transponder
Electronics:
- separate electronics
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
Optical IrDA
integrated in
Cashless reader
- external interface
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palmtop
- configurations
- Audit reading
SIB
- FW update
Data Key
- configurations
- Audit reading
EYE Display
7-segment display
- 5-figure LCD
- 6-figure LCD
GSM/GPRS
- Telemetry
Wireless network
System security
Peripheral devices and accessories
Cashless
Cellphone
10
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
OSCAR STAR
Cod. OM101EU8080............................................................ Cod. OM101EU8070............................................................
Key/card reader
OSCAR STAR 24 V Euro IrDA
OSCAR STAR 24V Euro
Cashless radio frequency system, for Mifare key and card. CPU and OSCAR STAR
key reader (also with integrated Optical IrDA).
Connects to electronic Automatic Vending Machines with Executive, BDV001,
and MDB serial protocols; connectors for a banknote reader and the 24VDC coin
validator are also envisaged as standard.
The EYE Display can be connected (for displaying images and texts, product information, adverts, etc.).
Expandable with ECB1 card (GSM/GPRS modem board, Zigbee wireless network,
Cashless Cellphone).
The system can be configured using a PC, palmtop, or via Optical IrDA, or with the
P3000 portable programming device.
code); compatible with the PAYTEC “Audit View” management system.
The data can be transferred via Optical IrDA, or via RS232/USB cable (with PC or
palmtop).
Power input:
24V AC/DC nom.; from 18.5V to 42V DC max power 1W nom.; 6W max (coin
validator on)
Overall dimensions
Key reader:
- weight 50 g
CPU Box:
- 120 x 110 x 24 mm
- weight 110 g
CPU unit
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
- MDB RS232
Operating modes
- loader
Contactless key:
- Mifare
Electronics
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- stdard EVA-DTS
- full
Times
- On/Off
- discounts
- free vend
- free
System security
Contactless
card:
- Mifare
Periferiche e accessori
Optical IrDA
integrated in
Cashless reader
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palmtop
- configurations
- Audit reading
SIB
- FW update
Data Key
- configurations
- Audit reading
EYE Display
7-segment display
- 5-figure LCD
- 6-figure LCD
GSM/GPRS
- Telemetry
Wireless network
Cashless
Cellphone
PAYMENT SYSTEMS
11
OSCAR LITE
Cod. OS701EU8070.........................................................
OSCAR LITE EXE. 24V
Compact Cashless radio frequency system, for contactless key (technology with
transponder); the CPU electronics are integrated in the key reader.
Connects to electronic Automatic Vending Machines using Executive serial protocol;
nevertheless also the BDV001 protocol is envisaged as well as the possibility of
connecting an interface for an MDB slave.
The connector for the 24VDC coin validator is also standard.
The system can be configured using a PC, palmtop, or with the P3000 portable
programming device.
code); compatible with the “Audit View” management.
The data can be transferred using the Data Key or via serial port with a PC/Palmtop.
Key reader
Nominal input
24 AC/DC nom.
19.5V - 40V DC
24V - 30V DC with coin validator
PIT key
(transponder)
Overall dimensions
• Key reader:
- casing Ø 35 x 90 (depth) mm
- front plate 50 x 70 x 11 mm
- weight 65 g
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes
- loader
Contactless key:
- transponder
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- standard EVA- DTS
- full
Times
- On/Off
- discounts
- free vend
- free
System security
Economic version
12
Optical IrDA
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palmtop
- configurations
- Audit reading
SIB
- FW update
PAYMENT SYSTEMS
Data Key
- configurations
- Audit reading
PAYMENT SYSTEMS
Catalogue 2008/2009
OSCAR STAR LITE
Cod. OM101EU8070............................................................
Cod. OM103EU8070............................................................
Key/card reader
OSCAR STAR LITE Executive 24VAC - Euro version
OSCAR STAR LITE MDB 34VAC - Euro version
Compact radio frequency Cashless system, for Mifare key and card. The CPU
electronics are integrated in the key reader.
Connects to Automatic Vending Machines using Executive, MDB serial protocols.
Various peripheral devices and accessories can be connected, such as the EYE
Display (for displaying images, texts, product information, adverts, etc.). Expandable with ECB1 card (GSM/GPRS modem board, Zigbee wireless network, Cashless
Cellphone).
The system can be configured using a PC, palmtop, Optical IrDA, or with the P3000
portable Programming device.
code).
Compatible with the PAYTEC “Audit View” management system.
All the peripheral devices of the OSCAR series can be connected, for the greatest
expandability.
Nominal input
24 AC/DC nom.
19.5V - 40V DC
24V - 30V DC with coin validator
MIFARE Key
Overall dimensions
• Reader:
- casing Ø 35 x 90 (depth) mm
- weight 65 g
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes
-loader
Contactless key:
- MIFARE
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- stadard EVA-DTS
- full
Times
- On/Off
- discounts
- free vend
- free
System security
Contactless
card:
- Mifare
Economic version
PC
- configurations
- Audit reading
Optical IrDA
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
EYE Display
PAYMENT SYSTEMS
13
OSCAR MDB
Cod. OS303 EU8070.......................................................
OSCAR MDB only
Compact MDB Cashless radio frequency system, for contactless key (technology with
transponder); the CPU electronics are integrated in the key reader.
Connects to electronic Automatic Vending Machines using MDB serial protocol. The
system can be configured using a PC, palmtop, or with the P3000 portable programming device.
The AUDIT management system (EVA-DTS standard protocol) has two data transfer
code); compatible with the PAYTEC “Audit View” management system. The data can
be transferred using the Data Key or via serial port with a PC/Palmtop.
Key reader
Nominal input
• 34V DC nom.
• Range: 18.5V - 42V DC
Power absorption: 1W
PIT key
(transponder)
Overall dimensions
• Key reader:
- casing Ø 35 x 84 mm
- weight 50 g
Characteristics
Serial protocols:
- MDB/ICP
- MDB RS232
Contactless key:
- transponder
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
System security
Economic version
14
Optical IrDA
P3000
- configurations
- IR reader
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
PAYMENT SYSTEMS
Data Key
- configurations
- Audit reading
PC
- configurations
- Audit reading
PAYMENT SYSTEMS
Catalogue 2008/2009
OSCAR CU
Cod. OS868EU8070..........................................................................
Cod. OS868EU8080..........................................................................
OSCAR CU
OSCAR CU with IrDA
Cashless key payment system, ready for Master-Slave connection, with Executive Automatic Vending Machines.
Connects between the Vending Machine and an Executive Changegiver, so the
prices and discounts can be managed by the OSCAR CPU.
The Audit on the OSCAR CU system makes it possible to obtain sales data even if
the coin validator doesn’t have an Audit system.
expandability.
Key/card reader
Power input:
24V AC/DC nom.; from 18.5V to 42V DC max power 1W nom.; 6W max (coin
validator on)
CPU unit
Overall dimensions
Key reader:
- weight 50 g
CPU Box:
- 120 x 110 x 24 mm
- weight 110 g
Characteristics
Serial protocols:
- Executive Master
Slave
Contactless key:
- transponder
Electronics
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
System security
Optical IrDA
integrated in
Cashless reader
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palm Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
EYE Display
Display
- 5-figure LCD
- 6-figure LCD
PAYMENT SYSTEMS
15
Sistemi di pagamento a chiave elettronica contactless --› Serie OSCAR
OSCAR STAR CU
Cod. OM168EU8070...................................................................
Cod. OM168EU8080...................................................................
OSCAR STAR CU
OSCAR STAR CU with IrDA
Cashless key payment system, ready for Master-Slave connection, with Executive
Automatic Vending Machine.
Connects between the Vending Machine and an Executive Changegiver, so the prices
and discounts can be managed by the OSCAR CPU. The Audit on the OSCAR CU
system makes it possible to obtain sales data even if the coin validator doesn’t have an
Audit system. All the peripheral devices of the OSCAR series can be connected, for the
greatest expandability.
Key/card reader
Power input:
24V AC/DC nom.; from 18.5V to 42V DC max power 1W nom.; 6W max (coin validator on)
Overall dimensions
Key reader:
- weight 50 g
CPU Box:
- 120 x 110 x 24 mm
- weight 110 g
CPU unit
Characteristics
Serial protocols:
- Executive
- Master - Slave
Contactless key:
- MIFARE
Contactless
card:
- Mifare
Electronics
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
Optical IrDA
integrated in
Cashless reader
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
EYE Display
System security
Display
- 5-figure LCD
- 6-figure LCD
16
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
OSCAR MDB-MDB
Cod. OS877EU8070..........................................................................
Cod. OS877EU8080..........................................................................
OSCAR MDB-MDB
OSCAR MDB-MDB with IrDA
CPU cashless system, ready for Master-Slave connection, with MDB serial Automatic
Vending Machine.
Connects between the Vending Machine and an MDB Changegiver, for Audit recording on the OSCAR system.
expandability.
Overall dimensions
CPU Box:
- 120 x 110 x 24 mm
- weight 110 g
Available on request:
CASHLESS readers
Characteristics
Serial protocols:
- MDB/ICP
- MASTER-SLAVE
Clock/calendar:
- discounts
- free vend
- free
AUDIT:
- EVA-DTS standard
- full
MDB peripheral
devices
Contactless key:
- Transponder
- MIFARE
- MIFARE
Electronics
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
P3000
- configurations
- IR reader
PC
- configurations
- Audit reading
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
Optical IrDA
integrated in
Cashless reader
Black List
- 500
EYE Display
Display
- 5-figure LCD
- 6-figure LCD
System security
PAYMENT SYSTEMS
17
Comparative commercial table for OSCAR series
OSCAR
STAR
LITE
STAR LITE
MDB
-
-
-
-
-
-
-
-
-
-
Executive Master
Executive Slave
Price Holding
MDB Master
-
-
-
MDB Slave
-
-
1
MDB RS-232
BDV001 Master
-
BDV001 Slave
-
Parallel Open Collector
-
-
-
-
Loader
Price Line
-
Transponder key
-
-
-
Mifare key/card
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Banknote reader
-
-
-
-
24VDC coin validator
MDB-MDB
-
-
STAR CU
-
CU
-
-
-
-
-
-
-
-
MDB peripheral device2
-
-
-
-
-
-
-
Portable programming device
PC management 3
WinCE Palmtop management
4
SIB
Data Key
-
-
-
Clock/Calendar
IrDA (integrated / external)
/
/
-/
-/
-/
/
/
/
“EYE” display
-
-
-
LCD
-
-
-
GSM/GPRS (telemetry) 6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Black List - 500 elements
Standard AUDIT
Full AUDIT
5
Wireless network
6
Cashless Cellphone 6
Times
No. Prices / Discount Lists
Free (for values / for credit)
Language: single / double
Standard (device can be connected)
Cashless Reader on request
- Unavailable
This table does not indicate if the “function” is standard or optional, but only if it is available.
1 Requires external EXE-MDB interface
2 MDB peripheral device controlled directly by payment system
3 Requires serial PC interface (CIC1/RS232 or UIC1/USB)
4 Requires Optical IrDA
5 Compatible with “AUDIT VIEW”
6 Requires ECB1 expansion card
18
PAYMENT SYSTEMS
EYE
Cod. AJ000005300.........................................................................
128 x 64 pixel Liquid Crystal Display
Monochrome, compact dimensions, can support text messages and images for custom
adverts. The display is controlled by the payment system.
• Adverts
Cyclical display, or selected or
key-controlled for example.
• Selection messages
Product information, that appears when product is selected (ingredients, promotions etc.)
• PAYTEC active systems line
Activation of discounts or promotions (happy hour), for example in times when consumption is low, as a sales incentive.
• News
Connected to a modem, sms
messages can be received and displayed, such as a contract with
your phone provider for example.
EYE CONFIGURATOR programme (for Win2000/XP)
Software for the EYE product, for the graphic composition of the file (the sequence of texts and images etc.), to save on PC and send to a palmtop which is then
used to configure the payment system connected to the display.
PAYMENT SYSTEMS
19
PAYMENT SYSTEMS
Catalogue 2008/2009
Contactless electronic key payment systems --› Accessories for the OSCAR series
Contactless key
(Trasponder -PIT-)
Cod. AL40.012N.............................................................................
Cod. AL40.013N.............................................................................
Cod. AL40.502N.............................................................................
Cod. AL40.010N.............................................................................
Cod. AL40.011N.............................................................................
Cod. AL40.127N.............................................................................
Cod. AL40.475N.............................................................................
Cod. AL40.480N.............................................................................
Top colour:
yellow
green
white
red
blue
black
transparent
orange
• Contactless radio frequency key
• EEPROM 1Kbit
• Frequency 125 kHz
• PIN code protected (7 byte password)
• Keys encoded with OSCAR Programming device instrument
• Direct Auto-encoding on payment system
• EMC compatibility: DIN 40839 conformity
• Customized key optional: logo, labels
• Colours: red, green, yellow, blue, black, white, transparent, transparent orange
All keys have a black stem, Top colours are optional.
For PROGRAMMING DEVICE see page 21
Contactless key (Mifare)
Cod. KS50.012..................................................................................
Cod. KS50.013..................................................................................
Cod. KS50.502..................................................................................
Cod. KS50.010..................................................................................
Cod. KS50.011..................................................................................
Cod. KS50.127..................................................................................
Cod. KS50.475..................................................................................
Cod. KS50.480..................................................................................
Top colour:
yellow
green
white
red
blue
black
transparent
orange
• ISO14443A Radio frequency Key
• Operating frequency: 13.56 MHz
• Keys encoded with OSCAR STAR Programming device
• Data transfer speed: 106 kbit/s
• High data integrity: 16 bit CRC, parity, bit coding, bit counting
• EEPROM 1 Kbyte
• Can be used with 3 PAYTEC client areas
• Multi application (MAD standard)
• Custom keys available on request: logo, labels
• Colours: red, green, yellow, blue, black, white, transparent, transparent orange
All keys have a black stem, Top colours are optional.
For PROGRAMMING DEVICE see page 21
20
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
CARD STAR
Cod. CS50.001. ................................................................
CARDSTAR
Mifare ISO14443 Chip available on card (PROGRAMMING). The card can be
customized on request, with the silk-screen printed Company logo.
The OSCAR STAR Programming device is used to program the CardStar (and
KeyStar).
Specifications
• ISO 14443A radio frequency key
• Operating frequency: 13.56 MHz
• Data transfer speed: 106 kbit/s
• High data integrity: 16 bit CRC, parity, bit coding, bit counting
• EEPROM 1Kbyte
• Can be used with 3 PAYTEC client areas
• Multi application (MAD standard)
• Colour: white card PAYTEC logo
• Customization: silk-screen printing on request (optional)
Cod. CB01491 (RS232 serial cable).....
PC CONFIGURATOR (including cables and software CD)
Cod. AG50044 (USB serial cable)............
Universal software application for payment system configuration.
Main functions:
- configuration (reading/sending)
- data reading (Audit)
- sending FW to SIB device
The application runs under Windows.
The software can be downloaded from the web site.
Cod. OS800008630.....................................................
OSCAR-Programming device.
Programming unit for keys with transponder-PIT technology - complete with software Windows95/98/2000/XP compatible
• Programme for FageKey and FageCard reading/writing
• Data reading from Audit-service-Key (Audit Key)
Lets you generate a complete series of service cards and keys, as well as
contactless cards and keys for other users. Furthermore, it is used to download the
Audit data saved in the AuditKey.
Cod. OM100008630...................................................
OSCAR STAR-Programming device.
Programming unit for keys and card with MIFARE technology
Windows95/98/2000/XP compatible
• Programme for FageKey and FageCard reading/writing
• Data reading from Audit-service-Key (Audit Key)
Lets you generate a complete series of service cards and keys, as well as
contactless cards and keys for other users. Furthermore, it is used to download the
Audit data saved in the AuditKey.
PAYMENT SYSTEMS
21
Free Tools
AUDIT CONTROL
. ..............................................................
•PC programme for Audit control
(free software tool for customers to download from the web site or supplied on CD)
RCS Remote Control Software.................................
• Program for remote control functions of the Vending Machines supplied as network/
GSM support (free software tool for customers to download from the web site or supplied on CD).
VECOP........................................................................................
• PC software for programming coins.
(Free software tool for customers to download from the web site or supplied on CD).
22
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
SOFTWARE-AUDITVIEW
Cod. AU000005200............................................................
AUDITVIEW
PC program studied for managing the data made
available by the “Full AUDIT” function of the
PAYTEC OSCAR series payment systems.
Can save a max of 4,500 key operations.
The operator gathers the data using one of the
available systems (key Audit, palmtop, PC) on
a PC where the data is saved in a database for
processing (compatibility: Windows 2000 / XP).
You must purchase a USB hardware key to install
the program. After having installed AuditView on
the PC, insert the hardware key in the USB port to
enable the programme.
General characteristics
Creation of database for single user codes:
- details on each key operation
- real time display of the keys in circulation at each location and their residual credit
- prints single reports for detailed documentation of
the real situation of the locations
Program. AuditView CD-R (USB)
Characteristics of the programme
Credit keys control (button)
Displays anomalous key operations or an anomalous increase in credit. The search can be run for
all the keys or for a single customer.
Key operations (window)
Displays the operations on a key in an interval of time defined by the user, running a search for a
single customer or in the entire database.
Total keys (window)
Displays the total number of operations carried out on the keys by all the users in a location or by
a group of users. The following is displayed for each key:
• User code • Date of last operation • Initial credit • Final credit (residual credit on key) • Number of
sales • Total sold • Sold with free credit • Value charged • Value charged with free credit
Cash sales (window)
Displays the cash sales of a certain customer and/or on a certain machine in an interval of days
defined by the user.
Advanced search (page)
Lets you search the database, setting the search criteria (customer search, search for machine
No., product code search, operation type search, user code search or period search).
Products consumption graph (page)
Displays the sales statistics of a product on the basis of times or days of the week, or for an
established period of time. Search in database for all the sales of a single product or for all
products, in a single machine or for all the machines of a customer. Calculates the number of
sales, dividing the sales by times or days of the week. The result is displayed on a histogram
graph.
Products rotation index
Indicates if a particular product reached the sales target. The database is searched for all of the
sale operations carried out on a machine or on all of the machines associated with a customer in
the period set. The number of selections is calculated for each product and divided by the number
of days (daily mean). The values obtained are compared to a value set for each product, which
indicates how many selections are expected on a daily basis.
PAYMENT SYSTEMS
23
Cod. AG50.030 ..................................................................
Data Key (Audit and Configuration)
Special memory key, used to transfer Audit data from payment systems.
The key can be used to Audit several Automatic Vending Machines. The number of
Vending Machines that can be audited with an Audit Key varies and depends on the
physical quantity of data present in the various Audit systems. This key is read by the
Giotto Programming device.
Cod. AG50.026 ..................................................................
SIB (Serial Interface Board)
Interface device used to save and transfer software between a Personal Computer
and a Payment System (and vice versa).
Used to update the systems with the last release and transfer the programming
configurations.
24
PAYMENT SYSTEMS
Cod. AC.00010G ...................................................................
PAYMENT SYSTEMS
Catalogue 2008/2009
P3000 GIOTTO r5.5 Programming device
Application
• Keyboard programming device for
PAYTEC Systems
• Data Box for data detection/unloading
Feeding
Data Box use: internal battery 8.4V/120 mAh (NiMH) rechargeable.
Using Programming device: 5V external supplied by System
Current absorbed: 60 µA in standby, 20 mA in transmission
Display: 16 x 2 (backlit) LCD
Keyboard: Membrane type 16 keys
Hardware interface
• AUDIT
• IR optical reader
• Communication speed: 2,400 Baud
Programming: cable connection (Flat)
Memory
• 1Mb RAM (roughly 30 Systems)
• Data maintenance 1 min. without battery
Data Box programme
• Data detection password
• Settings - 6 languages
• AUDIT format EVA-DTS, DDCMP
protocol
Accessories included
• Battery
• Connecting cable
• Case
Dimensions: 155 x 90 x 27 mm
Cod. AC.00097 ......................................................................
CHARGE 05 battery charger
Recharger used for the programming device P3000 batteries.
Application: P3000 - DB4000v battery chargers
Power input: 110/220V 50/60Hz
Consumption: 30 W max
Outputs
• 5 constant current outputs for
• 2.1 movable sockets
8.4V 0.11Ah batteries
• Dedicated NiMH batteries 8.4V / 110 mAh
Illuminated indications
• Green LED charging / charged output
• Combined blinking to indicate the
various cases
• Red LED indicates outputs not
connected/charging error
PAYMENT SYSTEMS
25
ChargekeyKey charger for OSCAR series system
Cod. CA100IT8290 ..........................................................
Cod. CA100IT8350 ..........................................................
Key charger for OSCAR systems
Key charger for OSCAR STAR (MIFARE) systems
Recharging station that can be installed on a wall or on the ground (using the
relevant basement).
• Strong, vandal-proof structure made of painted steel
• Reinforced lock with security bars
• Banknote reader
• Electronic coin validator
• Vandal-proof coin slot
• 50 mm printer
• Backlit display
• Key reading system for OSCAR system
Cod. CA100EU8311 ........................................................
26
PAYMENT SYSTEMS
Basement for OSCAR systems key charger
PAYMENT SYSTEMS
Catalogue 2008/2009
Converter
Cod. CO209000000............................................................ Cod. CO233000000............................................................
Cod. CO204000000............................................................
Cod. CO215000000............................................................
Cod. CO218000000............................................................
Cod. CO230000000............................................................
Cod. CO232000000............................................................
CSP2 VendoNRI-18/220V
CSP2 VendoCIC-110V 4pr
CSP2 Stand.220V/4pr.
CSP2 Dixie 110V/4pr.
CSP2 FAS 220V/4pr.12p.
CSP2 24Vac/Univ.12 4pr
CSP2 24Vac with wires without connector
Machine interface
• Electromechanical parallel - 4 prices
• 4 Relay outputs
Coin validator interface
• Executive Serial 24V AC
• Max current 900 mA @ 24V AC
Fuse
• 315 mA 220V AC
• 630 mA 110V AC
• 1,6 A thermal 24V AC
Input: 24/110/220V AC 50/60 Hz depending on version
Power: 22 W max
Application
Serial/parallel interface for Executive payment Systems.
Lets you connect an Executive System, or a coin validator, to an electromechanical
Vending Machine.
Prices lines inputs/outputs
• Prices with 4 NO output Relays
• Nominal current at contacts 2.5 A / 230V AC
• Max. current 8A
- common line
• Optoisolated inputs. Active prices line
sensors >1.0mA.
Display: DS4000 5 digit LED (external)
Programming: P3000 Programming device (accessory)
Program
• Sale prices
• Display prices
• 4 external RAZ modes + automatic RAZ
• Totalizer mode - 1 price (active)
Expansion - 10 prices
• External expansion for 10 prices. (rewiring required)
Dimensioni: 250 x 130 x 60 mm (comprensive di ingombro connettori)
Weight: 2.2 Kg roughly
Cod. KT02785..........................................................................
10 prices/230V FAS expansion kit
This is a supplementary kit which, when connected to a parallel payment system
for electromechanical Vending Machines, increases the number of prices that can
be selected from 4 to 10.
PAYMENT SYSTEMS
27
Notes:
28
PAYMENT SYSTEMS
PAYMENT SYSTEMS
CONTACTLESS ELECTRONIC KEY PAYMENT SYSTEMS
GENIUS SERIES
VENDING
GAMING
CAR WASH
LAUNDRY
RETAIL/KIOSK
GENIUS
The GENIUS series is a simple, versatile and
universal solution, easy to install and control for
Free Standing (FS) and Office Vending Machines
(OCS -office coffee service-).
PAYMENT SYSTEMS
29
Contactless electronic key payment systems --› GENIUS series
GENIUS
Cod. 3.500.70 ....................................................................
Cod. 3.500.69 ....................................................................
Cod. 3.500.71 ....................................................................
Cod. 3.500.75 ....................................................................
GENIUS FS-NEW PL (ELECTROMECHANICAL-PRICE LINE)
GENIUS FS-NEW EXE (EXECUTIVE)
GENIUS FS-NEW MDB (MDB)
GENIUS FS-NEW BDV (BDV)
GENIUS FS-NEW System, with illuminated slot
Suitable for large Automatic Vending Machines.
The reading slot comes complete with EVA standard LEDs.
Each pack contains:
•• .• . 1 system
•• .• . 1 slot with EVA standard LEDs (Ø 32 mm hole)
•• .• . 1 VMC connecting cable
(Vending Machine Controller or Automatic Vending Machine): in the EXE version
the cable also has an input for a changegiver coin validator, while the MDB version
has a double MDB connector
•• .• . highly adhesive fixings
•• .• . instruction stickers to apply on Automatic Vending Machine
Patented
Optional:
Cod. 3.500.68 ............................ EASY GENIUS FS-NEW EXE (EXECUTIVE)
Cod. 3.500.74 ............................ EASY GENIUS FS-NEW MDB (MDB)
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes
-loader
Electronics
MDB peripheral
devices
System security
Clock/calendar:
- discounts
- free vend
- free
AUDIT:
- EVA-DTS standard
- full
Contactless key:
- transponder
Coin validator:
- standard 12VDC
Coin validator:
- standard 24VDC
Banknote reader
- parallel
- impulse
Portable programming
device for GENIUS
systems
PC
- configurations
- Audit reading
GENIUS Superkey
Optical IrDA
integrated in
Cashless reader
Display
- 5-figure LCD
- 6-figure LCD
Black List
- 12
Changegiver:
Connection to a
changegiver system
30
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
GENIUS OCS
Cod. 3.500.53 .......................................................................
Cod. 3.500.39 .......................................................................
Cod. 3.500.50 .......................................................................
Cod. 3.500.57 .......................................................................
Cod. 3.500.61 .......................................................................
Cod. 3.500.76 .......................................................................
GENIUS OCS PL (ELECTROMECHANICAL-PRICE LINE)
GENIUS OCS EXE (EXECUTIVE)
GENIUS OCS EXE XS-XM (EXECUTIVE)
GENIUS OCS MDB (MDB)
GENIUS OCS MDB XS-XM (MDB)
GENIUS OCS BDV (BDV)
GENIUS OCS System, with reading coil
Suitable for large or small Automatic Vending Machines with front plate coin
validator. The reading coil is installed directly on the coin validator (therefore, no
holes need drilling in the Vending Machine).
Each pack contains:
•• . 1 system
•• . 1 coil to install on the side of the coin validator
•• . 1 single cable for connection to VMC (Vending Machine Controller or Automatic
Vending Machine)
•• . highly adhesive fixings
•• . instructions stickers to apply on Automatic Vending Machine
•• . on XS-XM version - adaptor for coin/key insertion
Patented
Optional:
Cod. 3.500.62 .......................... EASY GENIUS OCS EXE (EXECUTIVE)
Cod. 3.500.50/A..................... EASY GENIUS OCS EXE XS-XM (EXECUTIVE)
Cod. 3.500.72 .......................... EASY GENIUS OCS MDB (MDB)
Cod. 3.500.73 .......................... EASY GENIUS OCS MDB XS-XM (MDB)
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
- MDB RS232
Operating modes
-loader
Electronics
MDB peripheral
devices
System security
Clock/calendar:
- discounts
- free vend
- free
AUDIT:
- EVA-DTS standard
- full
Contactless key:
- transponder
Coin validator:
- standard 12VDC
Coin validator:
- standard 24VDC
Banknote reader
- parallel
- impulse
device for GENIUS
systems
PC
- configurations
- Audit reading
GENIUS Superkey
Display
- 5-figure LCD
- 6-figure LCD
Changegiver:
connections with
changegiver system
Black List
- 12
PAYMENT SYSTEMS
31
Contactless electronic key payment systems --› GENIUS series
GENIUS DISPLAY P.L.
Cod. 3.500.86......................................................................
Reading slot compatible with OSCAR and GENIUS systems with the dimensions of
a mechanical coin validator and built-in display.
Can be mounted both vertically and horizontally.
Version with the front plate dimensions of a standard mechanical coin validator
• Waterproof
• IP 44
• Input: 24VAC/DC
• No Relay outputs - NC 5A-230VAC
• With waterproof seal
• Fixing screws
Fields of application:
- Showers
- Self-service carwash
- Access control
Characteristics
Operating modes
-loader
Electronics
GENIUS key
Contactless key:
- transponder
System security
Clock/calendar:
- discounts
- free vend
- free
Black List
- 12
AUDIT:
- EVA-DTS standard
- full
Programming
device for integrated
GENIUS systems
PC
- configurations
- Audit reading
GENIUS Superkey
Display integrato
- 5-figure LCD
- 6-figure LCD
Coin validator:
- standard 24VDC
32
PAYMENT SYSTEMS
FS
OCS
EASY FS
EASY OCS
FS P.L.
OCS P.L.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BDV001 Master
-
-
-
-
BDV001 Slave
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Executive Master
Executive Slave
Price Holding
MDB Master
-
-
-
-
-
-
-
-
MDB Slave
MDB RS-232
-
-
-
-
-
-
-
-
-
-
-
-
EASY OCS FS EASY P.L. OCS
Loader
Price Line
Transponder key
Mifare key/card
Banknote reader
MDB peripheral device 2
-
-
-
-
3
3
PC management
WinCE Palmtop management 4
-
-
-
-
-
Clock/Calendar
-
-
-
-
-
-
-
-
Super key
Data Key
Standard AUDIT
Full AUDIT 5
“EYE” display
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
/
/
-
-
/
/
-
-
7-segment display
Wireless network
6
Cashless Cellphon
6
Times
No. Prices / Discount Lists
Standard (device can be connected)
Cashless Reader available on request
- Unavailable
1
2 3
4
5
MDB peripheral device controlled directly by payment system
Requires RS-232 Hardware Key Station and USB interface
Requires Optical IrDA
Compatible with “AUDIT VIEW”
Requires ECB1 expansion card
PAYMENT SYSTEMS
33
PAYMENT SYSTEMS
Comparative
commercial table for GENIUS series
Catalogue
2008/2009
Contactless electronic key payment systems --› Accessories for the GENIUS series
Cod. 3.501.36 ....................................................................
GENIUS Key
• Electronic contactless key with RF transponder. The size and shape let you insert the key in front plate coin validators.
• Large space for advertising
• Non-volatile data storage
• Dual operator/site code structure
• Personalised cryptography and password ensures maximum security
• Auto-restoring base-data backup
• Two or four user levels, free services, expiry
• Can be configured for all management system functions
Patented
› Pack of 100 pieces
Cod. 1.402.00 ......................................................................
GENIUS Card
•Standard ISO dimensions
› Pack of 200 pieces
Cod. 2.112.16 ....................................................................
GENIUS FS-EVA Slot
Reading slot for GENIUS key and GENIUS card
Characteristics
GENIUS Key
34
PAYMENT SYSTEMS
Contactless card:
- GENIUS
Cod. 2.531.10........................................................................
PAYMENT SYSTEMS
Catalogue 2008/2009
GENIUS Display
• 4-digit display with anchor bracket and wiring, suitable for electromechanical vendors with standard housing for display
Cod. 2.531.15........................................................................
GENIUS 6-digit display
• Numeric 6-digit display including cable and plastic protection
Cod. 2.531.09........................................................................
GENIUS display with button
• 4-digit display suitable for mounting on plate with circular hole. With GENIUS PL systems recharge button
PAYMENT SYSTEMS
35
Cod. 3.503.19.....................................................................
Portable GENIUS programming device
• 4-digit display, 3 programming buttons
• On-site programming and book-keeping audit
• Suitable for all GENIUS systems
Cod. 2.624.09......................................................................
GENIUS Base STATION + Software KEYSTATION FOR PC
• Connects to the RS232 serial port of the Personal Computer/USB port using the adaptor (not supplied)
• Reading/writing of user and special keys (e.g. programming, Audit, master, etc.), and complete superkey management (Audit/configuration) with data collecting and print functions also in EVA-DTS format
• Power supply and cables included
Cod. 2.624.10......................................................................
GENIUS Downloader
• Interface for updating GENIUS systems SW with a Personal Computer
• Comes with all cables required
36
PAYMENT SYSTEMS
Cod. 2.033.41.....................................................................
Base station GENIUS Kit + DOWNLOADER + harness
Cod. 3.501.25.....................................................................
GENIUS Superkey
PAYMENT SYSTEMS
Catalogue 2008/2009
• Data survey on up to 240 GENIUS Automatic Vending Machines
• Remote individual configuration on up to 240 GENIUS systems
• Update SW on GENIUS systems (up to 4 software programs)
• Management on Personal Computer via Base Station + SW Keystation
• Fast on-site operations.
N.B.: the superkey interface (Code 3.502.67) is required to update the SW.
Cod. 3.502.67.....................................................................
Superkey interface for SW updating on GENIUS
• PC-SUPERKEY connection for loading up to 4 different GENIUS SW programs
• SUPERKEY-GENIUS connection to download the SW to the system
PAYMENT SYSTEMS
37
Cod. 3.501.28.....................................................................
GENIUS code Key
Assigns the operator code to GENIUS systems and SW Keystation
Cod. 3.501.26.....................................................................
GENIUS programming key
• Non-modifiable, only available from PAYTEC
• Enables portable programming device
• Requires operator and site code used by system
Cod. 3.504.183..................................................................
Stepper/validator conversion cable
Special cable for GENIUS PL systems, to connect a stepper validator to input or
connect the system to a parallel validator input
Cod. 2.514.93.....................................................................
DS008
4-price board for coin stepper/validator or parallel coin validator, and for GENIUS
PL system. For connecting a parallel coin validator/stepper with electromechanical
machines. Indicate input voltage when ordering (230/115/24 VAC)
38
PAYMENT SYSTEMS
Cod. 2.033.39........................................................................
PAYMENT SYSTEMS
Catalogue 2008/2009
6-price kit board- 230/115/24 V
Conversion from electromechanical to executive
Cod. 2.531.10........................................................................
Cod. 2.514.49........................................................................
Cod. 3.504.163......................................................................
Cod. 3.504.139......................................................................
Composed of:
• 4-digit display with fixing brackets
• MH244 230/115/24 VAC board - 6 electromechanical prices
• 1 connecting cable
• 1 semi-manufactured MH244-machine harness
N.B. alternatively and with limited performance, the economic DS008 interface can
be used connected to the GENIUS PL
Cod. 3.502.68.........................................................................
Interface for GENIUS and coin validators on LAVAZZA PININFARINA dispenser.
For connection with GENIUS PL system and with 2-price 12 VDC coin stepper/
validator.
Cod. 2.303.01.........................................................................
Holing tool for GENIUS FS-NEW slot
Ø 32 mm holing tool for fitting GENIUS slots
Cod. 9.902.01.........................................................................
Cutter for rectangular slot
Tool for cutting holes to fit the rectangular GENIUS key and card slots
PAYMENT SYSTEMS
39
Key chargers for the GENIUS system
Cod. CA100IT8340........................................................
Cod. CA100IT8350........................................................
Key chargers for the GENIUS system
Key/Card chargers for the GENIUS system
Wall or floor (with relevant basement) mount recharge station.
•Strong vandal-proof structure made of painted steel
•Reinforced lock with security bars
•Banknote reader
•Electronic coin validator
•Vandal-proof coin slot
•50 mm printer
•Backlit display
•Key reading system for GENIUS system
- 32 mm slot with led for contactless key only
- Reading slot for GENIUS key and card
Cod. CA100EU8311 ......................................................
40
PAYMENT SYSTEMS
Basement for GENIUS systems key charger
PAYMENT SYSTEMS
Catalogue 2008/2009
FLASH GOLD
Cod. 3.500.36 ........................................................................
Cod. 3.500.41 ........................................................................
Cod. 3.500.45 ........................................................................
FLASH GOLD base version (A)
EXECUTIVE Version
MDB Version
BDV Version
Cod. 3.500.32 ........................................................................
Cod. 3.500.40 ........................................................................
Cod. 3.500.44 ........................................................................
FLASH GOLD base version with case (B)
EXECUTIVEVersion
MDBVersion
BDVVersion
Cod. 3.500.37 ........................................................................
Cod. 3.500.43 ........................................................................
Cod. 3.500.47 ........................................................................
FLASH GOLD plus version (A)
EXECUTIVE Version
MDB Version
BDV Version
Cod. 3.500.35 ........................................................................
Cod. 3.500.42 ........................................................................
Cod. 3.500.46 ........................................................................
FLASH GOLD plus version with case (B)
EXECUTIVE Version
MDB Version
BDV Version
B
FLASH GOLD
Payment and multiprotocol system for Executive/BDV/ MDB/Electromechanical
Automatic Vending Machines with or without changegivers
A
•64-price line price-holding mode
•4 user levels
•Data audit through Audit-Key or IrDA-EVA-DTS unit (PLUS Model)
•Optional module for archive - clock - IrDA
•Programmed through Audit-Key (with computerized management) or using portable
programming device
•Fully compatible with Air systems
•Management of free / Happy Hour / expiry and key validity services
•Automatic Euro conversion
•No intelligent electronics in key reader
•Prepayment of sales
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
- MDB RS232
Operating modes
- loader
Electronics
MDB peripheral
devices
System security
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Banknote reader
- parallel
- impulse
Coin validator only
with DS004 interface:
- standard 12VDC
Coin validator only
- standard 24VDC
Coin validator:
- standard 24VDC
device for GENIUS
systems
PC
- configurations
- Audit reading
GENIUS Superkey
IrDA Mod. PLUS
- integrated in
Cashless reader
Display
- 5-figure LCD
- 6-figure LCD
Changegiver:
Connection to a
changegiver system
Times
- On/Off
- discounts
- free vend
- free
PAYMENT SYSTEMS
41
Contactless electronic key payment systems --› FLASH series
FLASH PRO - FLASH PLUS
Cod. 3.500.80....................................................................
Cod. 3.500.81....................................................................
Cod. 3.500.82....................................................................
Cod. 3.500.83....................................................................
FLASH PRO EXE (with executive protocol)
FLASH PRO MDB (with MDB protocol)
FLASH PLUS EXE (with executive protocol and IrDA interface)
FLASH PLUS MDB (with MDB protocol and IrDA interface)
• Internal clock with battery
• EVA-DTS data audit through Audit Key
• EVA-DTS data audit through IrDA interface (FLASH PLUS only)
• Programmed with programming device for FLASH GOLD/FLASH and/or configuration key
• 32-price line price-holding
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
- MDB RS232
Operating modes
-loader
Electronics
MDB peripheral
devices
System security
Clock/calendar:
- discounts
- free vend
- free
Black List
- 500
AUDIT:
- EVA-DTS standard
- full
Banknote reader
- parallel
- impulse
Coin validator only
- standard 12VDC
Coin validator only
- standard 24VDC
Coin validator:
- standard 24VDC
device for GENIUS
systems
PC
- configurations
- Audit reading
GENIUS Superkey
IrDA Mod. PLUS
- integrata nel lettore Cashless
Display
- 5-figure LCD
- 6-figure LCD
Changegiver:
Connection to a
changegiver system
Times
- On/Off
- discounts
- free vend
- free
42
PAYMENT SYSTEMS
FLASH GOLD
FLASH GOLD PLUS
FLASH PRO
FLASH PLUS
-
-
-
-
Price Line
-
-
-
-
Transponder key
*
*
*
*
Mifare key/card
-
-
-
-
6
6
6
6
-
-
-
-
3
3
3
3
-
-
-
-
PAYMENT SYSTEMS
Catalogue
2008/2009
Comparative
commercial table for FLASH series
Executive Master
Executive Slave
Price Holding
MDB Master
MDB Slave
MDB RS-232
BDV001 Master
BDV001 Slave
Parallelo Open Collector
Loader
Banknote reader
MDB peripheral device2
PC management
Easy DTS
Data Key
Clock/Calendar
-
-
Standard AUDIT
Full AUDIT 5
“EYE” display
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
/
/
5-segment display
Wireless network
6
Cashless Cellphone
6
Times
No. Prices / Discounts lists
/
/
- *
Standard (connects to device)
Unavailable
Key with embedded microprocessor
3 Requires serial PC Interface (CIC1/RS232 or UIC1/USB) Base Station
6 Requires DS004 expansion card
PAYMENT SYSTEMS
43
Contactless electronic key payment systems --› Accessories for the FLASH series
Cod. 3.501.14.....................................................................
AIRKEY
Electronic contactless key available in various colours
› Pack of 50
Cod. 3.501.33.....................................................................
AIRKEY Code Key
• For configuring 1 or more Vending Machine
Cod. 3.501.21.....................................................................
AUDIT-KEY
For data survey on 20 Vending Machines with Air/Flash systems
Data provided: partial income with key, extra income and revalue coins/notes.
Machine number (on all systems) and date/time survey (on Airkey – Microkey
Contactless).
Automatic management with Airwrite software.
Cod. 3.501.22.....................................................................
CONFIG-KEY
• Auto-supplied single-channel transponder system
• Waterproof
• Bit in EPROM technology
• Microprocessor for transmission control
• Personalised cryptography
• Double auto-repairing copy of main data
• Control code for each data structure
• Historical data of last 5 operations
44
PAYMENT SYSTEMS
Cod. 2.624.07 ........................................................................
PAYMENT SYSTEMS
Catalogue 2008/2009
AIRKEY Console
Console for Airkey keys management through PC
Composed of:
• Airkey Console
• Power supply
• Serial connection cable for PC
• Air Write Software
• Power Input: 9 - 24VAC/DC
• VPBOX Software for FLASH GOLD
Cod. 3.503. 16 .......................................................................
FLASH GOLD/FLASH programming device
Portable terminal for FLASH GOLD programming
Cod. 2.033.24 ....................................................................
230/115/24 VAC electromechanical Kit for FLASH GOLD
Cod. 2.033.23 ....................................................................
Cod. 2.514.49 ....................................................................
Cod. 3.504.163 .................................................................
Cod. 3.504.139 .................................................................
Composed of:
• 1 x 5-digit display with two types of fixing brackets
• 1 MH244 230/115/24 VAC card for 6 electromechanical prices
• 1 connecting cable
• 1 semi-manufactured MH244-machine harness
PAYMENT SYSTEMS
45
Contactless electronic key payment systems --› Accessories for the FLASH series
Key charger for FLASH systems
Cod. CA100IT8330 ..............................................................
Key charger for FLASH systems
Wall or floor (with relevant basement) mount recharge station.
• Strong vandal-proof structure made of painted steel
• Reinforced lock with security bars
• Banknote reader
• Vandal-proof coin slot
• 50 mm printer
• Backlit display
• Key reading system for FLASH system
Cod. CA100EU8311 ........................................................
Basement for FLASH systems key charger
Cod. 9.902.01 ....................................................................
Cutter for rectangular slot
Tool for cutting holes to fit the rectangular FLASH key and card slots
46
PAYMENT SYSTEMS
Cod. 3.503.17........................................................................
PAYMENT SYSTEMS
Palmtop data collection system (for OSCAR, GENIUS, and FLASH series)
EASY DTS, universal palmtop for DDCMP and DEX data survey
Portable battery-powered data auditing unit.
Cable or IrDA connections
Supports EVA-DTS 5.0 and DEX UCS
Composed of:
• EASY DTS case
• Standard DDCMP and DEX cable
• Software for downloading data in text/EVA-DTS format
PAYMENT SYSTEMS
47
Notes:
48
PAYMENT SYSTEMS
PAYMENT SYSTEMS
“OCS” MACHINES PAYMENT AND CONTROL SYSTEMS
SENTINEL, “smart card” payment system
VENDING
Kit Card
Vending
Card
SENTINEL:
payment and control system for pod and
water vendor machines.
Operator
Card
• Machine is operated by simply inserting the disposable/re-usable card
• Three types of card (Kit, Vending
and Operator) with various management formulas, single or multiple use
• The distribution of a specific product or all those selected is disabled when the set number of sales is reached
• Automatic data survey every time card is used, consultable with a PC
• Installation involves simple interventions on the electrical system of the machine
• Semi-manufactured harness with silicone rubber-
coated wires
• Many fixing solutions inside and outside machine
• Operating state shown by LEDs on front panel
• Drilling and fixing template of the front panel supplied with documentation
PAYMENT SYSTEMS
49
“Smart card” payment system
SENTINEL
Cod. 2.033.66.....................................................................
Board complete with 50 cm semi-manufactured harness with silicone rubber-coated
wires and 6-pole connector
› Pack of 10
Characteristics
Operating modes
-loader
Cod. 2.033.65.....................................................................
Cod. 2.033.64.....................................................................
Chip-card
PC
- configurations
- Audit reading
Cost savings
SENTINEL Kit for external assembly
SENTINEL Kit for internal assembly
The kit includes:
• Serigraphed adhesive template for front panel with indications of card insertion slot and LEDs
• Polycarbonate box (for outdoors)
• Auto-tapping screws for fixing card in box
• 4 fixing screws
• Chock to protect the wires entering the machine
50
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
SENTINEL Accessories
Cod. 1.402.02.........................................................................
SENTINEL Card
• The cards can be recharged or reprogrammed using the PC programming kit:
- KIT CARD
single use; the card is charged with a set number of sales
- VENDING CARD
the number of sales is saved on the card to be used one by one
- OPERATOR CARD
same functions as kit card, but with preset number of uses
N.B.:
the card is supplied as code 0 kit card with 200 sales (customer may change/
reprogram it with the SW)
› Pack of 100
Cod. 1.402.03.........................................................................
SENTINEL Code Card
• Enters an exclusive application code in the SENTINEL system and on the PC to avoid interference with other systems
• Resets the partial counters of the SENTINEL card when changing location
Cod. 3.503.20.........................................................................
PC programming Kit for SENTINEL system
The kit includes:
• USB Card Reader for PC and Windows
application software
Functions:
• Reactivation of cards already used
• Reprogramming of cards with different functions
• Reading audit data
PAYMENT SYSTEMS
51
PAYMENT AND CONTROL SYSTEMS for “OCS” MACHINES
OCS CONTROLLER, identification and Audit system for the best control and
management of the OCS
VENDING
GAMING
Cod. AU065008200
OCS machines are a valid alternative to traditional
Vending Machines thanks to the relatively low
management costs, to offer a service where
traditional vending wouldn’t be feasible.
The weak point is the dispensing system though,
which doesn’t let you set the actual number of
selections dispensed. Furthermore, the compact
size of the machine makes it easy to move from
one location to the next, with scarce machine
traceability.
OCS-AUDIT Espr.Point 2302 220V
The use of the OCS CONTROLLER system, easy to install and at a limited cost,
lets you:
- establish the actual consumption of pods by the machine
- know exactly where the machine is
The data gathered, simple but essential, provides solid feedback for the
management.
The method with which the data is gathered with IrDA is fast and practical, thanks
to the use of WINDOWS CE and PSION compatible palmtops, in line with the type
of machine.
Main functions
• Machine serial number
lets you follow the history of installations, keeping trace of every operation
• Number of selections made after previous
corresponds to the number of pods consumed after the previous step
• Total Number of Selections
for programming preventive maintenance interventions, instead of the mechanical
counter
Using the serial number, associated with the code of the location where the
machine is installed, the management system can calculate the average
consumption of the location, optimising the steps necessary for provisioning
company stores.
• Audit reading with EVA-DTS standard protocol
• PSION, Windows CE, etc. terminal ports
52
PAYMENT SYSTEMS
PAYMENT SYSTEMS
CARD PAYMENT SYSTEM
OBLITERATORS AND MINI-OBLITERATORS
• Ideal as a cashless system with disposable card
• Personalised codes
• Extremely low cost of card
• 10 uses card: 100 cards = 1,000 sales (immediate audit)
VENDING
GAMING
LAUNDRY
• Simple installation
• Mini version suitable for standard front plate of mechanical and
electronic coin validators
CAR WASH
MINI-OBLITERATORS
Cod. 1.106.02.........................................................................
Single cut Mini-obliterator
Patented
• Power Input: 220V AC (on request 110V - 24V)
• Cutting blades: hardened steel (long life)
• Operating temperature: from -10°C to +55°C
• Optional: pulse counter; dispenser adapter harnesses, stepper counter, timer, timer box.
Cod.
...............................................................................................
Minicard (pack of 3,000)
Ten-cuts cards
WARNING: pay attention to the code on the card, as it may be the “NEW” or
“NORMAL” type
Cod. 2.111.01.........................................................................
Waste collecting box
Box to collect cut pieces of cards
PAYMENT SYSTEMS
53
CARD PAYMENT SYSTEM
OBLITERATOR
Cod. 1.101.01.....................................................................
Obliterator
230/115/24 VAC / 230/115/24 VAC
• Power Input: 220 VAC (on request 110V - 24V)
• Cutting blades: hardened steel (long life)
• Operating temperature: from -10°C to +55°C
• Optional: pulse counter; Vending Machine adapter harnesses, stepper counter,
timer, timer box.
Cod. ...........................................................................................
CARD10 (pack of 2,500)
Ten-cuts cards
Cod. ...........................................................................................
CARD20 (pack of 2,000)
Twenty-cuts cards
WARNING: pay attention to the code on the card, as it may be the “NEW” or
“NORMAL” type
54
PAYMENT SYSTEMS
PAYMENT SYSTEMS
COIN PAYMENT SYSTEMS --› Changegiver devices
CHANGEGIVER
VENDING
RETAIL/KIOSK
Laser and auto-calibration technology: the
experience of designers and manufacturers
in automatic payment systems.
For years we have been creating systems for the
Vending sector, introducing also important functions
and characteristics, such as the integration of the
GSM module for alarms and diagnostics, or the
LASER CHECK system, which uses patented Laser
technology to identify and select coins with great
speed, precision and security.
Today, we are pleased to present another evolution,
SIX a unit with 6 quick extraction/insertion tubes,
equipped with an innovative coin level system
covered by an international patent.
PAYMENT SYSTEMS
55
SIX
Cod. SX601EU3180. ........................................................
(European version, 6 standard tubes)
SIX (New)
New changegiver system with 6 tubes characterised by the high speed and precision
of the coin identification, application versatility, and flexibility in the programming of
coin types and values.
The integrated display and the practical pushbutton front panel make programming
easy. A special, patented device recognizes how many coins are in the 6 quickextraction tubes, instantaneously.
- 6 tubes (quick extraction/insertion tubes unit)
- Auto-calibration (international patent)
- Measures the coin level in the tubes (international patent)
- GSM module integration for alarms, diagnostics, and Cashless Cellphone (NPS)
Characteristics
Serial protocols:
- Executive
- MDB/ICP
Master-Slave
- BDV001
Operating modes
- loader
MDB peripheral
devices:
- banknote reader
- cashless
Clock/calendar:
- discounts
- free vend
- free
Optical IrDA
integrated
(cashless series)
Display
128x64
AUDIT:
- EVA-DTS standard
- full
On/Off:
- discounts
- free vend
- free
Coins channels
30
USB:
with interface
56
Contactless
key:
- transponder
- Mifare
Contactless
card:
- Mifare
Banknote reader
- parallel
- impulse
Security
P3000
- configurations
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
Black List
- 500
EYE Display
GSM/GPRS
- Telemetry
Wireless network
Cashless
Cellphone
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
FOUR 8900 - PLUS JEDY 5900
Cod. JE601EU3180..............................................................
Cod. JE602EU3180..............................................................
Cod. JF601EU3180..............................................................
Cod. JF601EU3180..............................................................
LASER CHECK
PLUS JEDY 5900 Euro Exe/MDB
PLUS JEDY 5950 Euro Bdv/MDB
FOUR 8900 Euro Exe/MDB
FOUR 8900 Euro Bdv/MDB
- 4 tubes
- GSM module integration for alarms, Cashless Cellphone (NPS) and diagnostics
LASER CHECK (JEDY model only)
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes
-loader
MDB peripheral
devices:
- Banknote reader
- Cashless
Clock/calendar:
- discounts
- free vend
- free
Display
- 5-figure LCD
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off:
- discounts
- free vend
- free
Coins channels
30
USB:
With interface
Laser Check
mod. JEDY
Contactless
card:
- Mifare
Banknote reader
- parallel
- impulse
P3000
- config.
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
Optical IrDA
integrated in
Cashless reader
Black List
- 500
EYE Display
GSM/GPRS
- Telemetry
Wireless network
Cashless
Cellphone
PAYMENT SYSTEMS
5757
JEDY 5700 EXE-MDB - JEDY 5750 BDV-MDB
Cod. JE401EU3180..........................................................
Cod. JE402EU3180..........................................................
Cod. OS000008430.........................................................
Cod. OS000008420.........................................................
LASER CHECK
JEDY Dual protocol Exe/MDB Euro
JEDY Dual protocol Bdv/MDB Euro
OSCAR KEY+IrDA Key readers with cables for JEDY
OSCAR KEY Key readers with cable for JEDY
- 4 tubes
- Dual protocol Executive/MDB or Bdv//MDB
- LASER CHECK diagnostics
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes
-loader
MDB peripheral
devices:
- banknote reader
- cashless
Clock/calendar:
- discounts
- free vend
- free
Display
- 5-figure LCD
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off:
- discounts
- free vend
- free
Coins channels
30
Contactless
key:
- transponder
Banknote reader
- parallel
- impulse
P3000
- configurations
- IR reader
- coin programming
PC
- configuration
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
Optical IrDA
integrated in
Cashless reader
Laser Check
Black List
- 500
58
PAYMENT SYSTEMS
PAYMENT SYSTEMS
Catalogue 2008/2009
JEDY 5600 EXE ONLY
Cod. JE701EU3160..............................................................
Cod. JE701EU3180..............................................................
Cod. OS000008430.............................................................
Cod. OS000008420.............................................................
LASER CHECK
JEDY 5600 Euro 21-21-23-25G
JEDY 5600 Euro 21-23-23-25G
OSCAR KEY+IrDA Reader with cables for JEDY
OSCAR KEY Reader with cable for JEDY
- 4 tubes
- Executive protocol
- Reduced features with respect to previous models but with higher performance
- Competitive price
- LASER CHECK diagnostics
Characteristics
Serial protocols:
- Executive
- BDV001
Operating modes
-loader
Clock/calendar:
- discounts
- free vend
- free
Display
- 5-figure LCD
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off:
- discounts
- free vend
- free
Coins channels
30
Laser Check
Contactless
key:
- transponder
P3000
- configurations
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
- configurations
Data Key
- configurations
- Audit reading
Optical IrDA
integrated in
Cashless reader
Black List
- 500
PAYMENT SYSTEMS
5959
FOUR 8400 MDB ONLY - JEDY 5400 MDB ONLY
Cod. JE303EU3180..........................................................
Cod. JE303EU3180..........................................................
(European version, standard tubes)
JEDY MDB ONLY - JEDY 5400
JEDY 5400 Euro 21-23-23-25G
FOUR MDB ONLY inductive
For characteristics, see previous model
LASER CHECK
Characteristics
Serial protocols:
- MDB/ICP
AUDIT:
- EVA-DTS standard
Coins channels
30
Laser Check
mod. JEDY
SIB
- FW update
- configurations
P3000
- configurations
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
60
PAYMENT SYSTEMS
SIX
MODEL
Inductive technology
-
PLUS
2P
FOUR
JEDY
8900
5900
EXE ONLY
JEDY
5700
5750
MDB ONLY
JEDY
FOUR
JEDY
5600
8400
5400
-
PAYMENT SYSTEMS
Catalogue
2008/2009
Comparative
commercial table of changegiver systems
-
Change tubes
Coin channels
6
4
Executive Master
30
Price Holding
-
MDB Master
-
MDB Slave
-
-
BDV001 Master
-
-
BDV001 Slave
-
-
Loader
-
-
-
Transponder key
Chiave transponder
Mifare key/card
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Banknote reader
-
-
-
MDB peripheral device 7
-
-
-
Data Key
-
-
Clock/Calendar
-
-
PC management 8
SIB
IrDA integrated/external
/
-/
Black List - 500 150 elements
-/
-/
500
-/
-
-
150
-
-
Standard AUDIT
Full AUDIT 10
“EYE” display
-
-
-
-
-
-
-
-
-
-
-
LCD
-
-
-
-
Wireless network 6
-
-
-
-
-
-
Cashless Cellphone
6
-
-
Times
-
-
-
-
Promotional sales
-
-
/ -
/ -
/
/
/
/
/ -
- Unavailable
8 Requires serial PC interface (CIC1/RS232 or UIC1/USB)
PAYMENT SYSTEMS
6161
COIN PAYMENT SYSTEMS --› Accessories for changegiver devices
Cod. LA000288XX107....................................................
Cod. LA000288XX207....................................................
Cod. LA000288XX307....................................................
The CV Audit (Coins Validator Audit) lets you fit the Automatic Vending Machine
(VMC), equipped with a parallel coin validator, with a coin cash register system in
EVA-DTS format, if the same VMC doesn’t already have these functions.
Cod. AL40.426
Optical IrDA kit
External IrDA interface + cable
..................................................................
Transmission system for Audit data survey via IrDA. The kit can be connected to any
PAYTEC payment system, and the data can be gathered using a winCE/palmOS
palmtop
Cod. OS000008430.........................................................
OSCAR KEY+IrDA Reader with cables for JEDY
HI-TAG key
Cod. OM000008400........................................................
Cod. OM000008410........................................................
Key/card reader
MIFARE key
62
PAYMENT SYSTEMS
OSCAR STAR Reader C/Key + cable
OSCAR STAR Reader C/KEY IrDA + cable
PAYMENT SYSTEMS
NPS - NETWORK PAYMENT SOLUTION (WIRELESS SYSTEM)
VENDING
RETAIL/KIOSK
NPS - NETWORK PAYMENT SOLUTION
Device for using Automatic Vending Machines with a wireless network. The network
card can be inserted directly in the changegiver or in its own plastic housing.
Integrated “Cashless Cellphone” functions. The user’s cellphone acquires the
identity of the same user, so you can open personal credit to be spent throughout
the network of machines.
Cod. RC000006141 ....................................................................... Cod. RC000006140......................................................................... Cod. RC000006130......................................................................... Cod. RC000006150......................................................................... Cod. CM0072000VH00................................................................
ECB1 /GSM Card for the OSCAR CPU system with housing
ECB1 Card mod. GSM
ECB1 Card mod. GSM/ZIGBEE
ECB1 Card mod. ZIGBEE
Adhesive ECB1 type T-AT196-BU retractable antenna (not included)
- necessary accessory –
Characteristics
Wireless network
Cashless
Cellphone
GSM/GPRS
- Telemetry
PAYMENT SYSTEMS
63
Notes:
64
PAYMENT SYSTEMS
COIN VALIDATORS
COIN VALIDATORS
VENDING
GAMING
LAUNDRY
CAR WASH
RETAIL/KIOSK
COIN VALIDATORS
65
COIN VALIDATORS
ONE CV2406
Cod. JF055EU000M.........................................................
Cod. JF055EU000O..........................................................
ONE 5” - ONE 5” CV2406
ONE 5” - ONE 5” CV2406 without case
Standard 5” parallel coin validator
- 24VDC power supply
- 24 coin channels
Characteristics
Operating modes
- standard parallel
12/24VDC
- impulses output
- Combined mode
- totalizer mode
1 price timed
- totalizer multi vend
- totalizer 6 prices
Dip Switch:
- configurations
- coin programming
PC
- configurations
- FW update
- coin programming
66
COIN VALIDATORS
Display
- 5-figure LCD
Coins channels
24
Catalogue 2008/2009
JEDY CV5000
LASER CHECK
JEDY CV
JEDY CV5000
JEDY CV Europe validator
JEDY CV sel. Europe validator without casing
COIN VALIDATORS
Cod. JE055EU000M.........................................................
Cod. JE055EU0000..........................................................
Coin validator with LASER CHECK technology
- 24VDC power supply
- 30 coin channels
Characteristics
Operating modes
- standard parallelo
24VDC
- impulses output
- Combined mode
- totalizer mode
1 price timed
Coins channels
30
Laser Check
SIB
FW update
Display
- 5-figure LCD
P3000
- IR reader
- coin programming
PC
- coin programming
COIN VALIDATORS
6767
COIN VALIDATORS
GIODY CV6000-12V - GIODY CV6000-24V
Cod. GD054EU0000....................................................................
Cod. GD055EU0000....................................................................
Cod. AS.00264..................................................................................
Cod. AS.00271..................................................................................
Cod. AS.00265..................................................................................
Cod. AS.00272..................................................................................
LASER CHECK
GIODY 12V Europe Validator
GIODY 24V Europe Validator
GIODY CV front assembly + grey LCD
GIODY CV front assembly + black LCD
GIODY CV front assembly - grey
GIODY CV front assembly - black
Power input: 24V DC / 0.25A max
Power: 6 W max
Dimensions (WxHxD)
• Reader: 120x50x102 mm /internal machine area
• Front panel: 63x155x30 mm /max. overall dimensions
Assembly: front panel, fixed with 4 x M4 nuts
Weight: 0.4 Kg
Characteristics
Operating modes
- standard parallel
12 or 24VDC
- impulses output
- Combined mode
- totalizer mode
1 price timed
Coins channels
30
Laser Check
SIB
FW update
68
COIN VALIDATORS
Display
- 5-figure LCD
P3000
- IR reader
- coin programming
PC
- coin programming
Catalogue 2008/2009
MINI MV2406 12/24V
Mini validator (cable not included)
16-pole cable (24VDC version)
10-pole cable (12VDC version)
Machine interface
• Electronic Open Collector
• 6-coin output
• Parallel/binary mode
• DIL 16 pin / 24V DC connector
Power supply:
24V DC / 300 mA max
12V DC / 450 mA max
100 mA in standby
Outputs
• Standard: 6 lines / 6 coins / 100 ms
• Combined: 6 lines in binary combination /
14 coins (EURO+NCU) / timed operation
100 ms.
Coins
• 24 programmable channels
Software
• Update with PC interface
• Vecop 3.0
COIN VALIDATORS
Cod. MV074EU0000. ..................................................................
Cod. CB.0059......................................................................................
Cod. CB.0094......................................................................................
• 50V @ 500mA max
• Selective adjustment
• Dip Switch for manual adjustment
Accessories
• External LCD
Dimensions (H x W x D): 102 x 54 x 88,5 mm
Weight: 330 gr.
Characteristics
Operating modes
- standard parallel
12 or 24VDC
- impulses output
- Combined mode
- totalizer mode
1 price timed
Coins channels
24
Dip Switch:
- configurations
- coin programming
Display
- 5-figure LCD
PC
- configurations
- coin programming
- FW update
COIN VALIDATORS
6969
Comparative commercial table for coin validators
Standard 5”
MODEL
Standard 3,5”
ONE
JEDY
CV2406
CV5000
Standard 12VDC DIL 10 pin
GIODY
CV6000 12V
-
Standard 24VDC DIL 16 pin
MINI
CV6000 24V
MV2406
-
Totalizer mode
1 price timed
6 prices totalizer mode
Multi vend totalizer
mode
Combined mode
Laser technology
-
-
Coin channels
24
30
6 coin outputs
30
30
24
6
-
Dip Switch
-
-
-
PC management 1
SIB
-
-
LCD
-/-
-/-
/-
- Unavailable
1
70
Requires serial PC interface (CIC1/RS232 or UIC1/USB)
COIN VALIDATORS
/-
-/-
Catalogue 2008/2009
GIODY
LASER CHECK
GIODY adapt.EP3100 + transf.
GIODY adapt.Saeco7P + transf
GIODY adapt.G13/10p.4coin
GIODY adapt.24V/16p.4 coin
GIODY adapt.G13/10p.4coin
GIODY adapt.Change
GIODY loader 24V
GIODY Executive
GIODYK Executive
GIODY MDB EURO
GIODY adapt. Expr.Point/RJ6
GIODY front.ass.2Pr+LCD grey
GIODY front.ass.2Pr+LCD black
GIODY front.ass.+LCD grey
GIODY front.ass.+LCD black
GIODY front.ass. noLCD grey
GIODY front.ass. noLCD black
GIODY front.ass. noLCD/IrDA gray
GIODY front.ass. noLCD/IrDA black
COIN VALIDATORS
Cod. GD861EU0000........................................................................
Cod. GD828EU0000........................................................................
Cod. GD154EU0000........................................................................
Cod. GD155EU0000........................................................................
Cod. GD854EU0000........................................................................
Cod. GD872EU0000........................................................................
Cod. GD801EU8030........................................................................
Cod. GD101EU0000........................................................................
Cod. GD801EU0000........................................................................
Cod. GD803EU0000........................................................................
Cod. GD165EU0000........................................................................
Cod. AS.00281......................................................................................
Cod. AS.00282......................................................................................
Cod. AS.00263......................................................................................
Cod. AS.00269......................................................................................
Cod. AS.00266......................................................................................
Cod. AS.00270......................................................................................
Cod. AS.00299......................................................................................
Cod. AS.00300......................................................................................
Power input: 24V AC nom, from 18.5V to 42V DC
Consumption: max. output: 10 W
Temperature: range: 0° - 50°C
Dimensions (WxHxD)
Reader: 120x50x102 mm /internal machine area
Front panel: 63x155x30 mm /max. overall dimensions
Assembly: with front panel, fixed with 4 x M4 nuts
Weight: 0.4 Kg
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes:
- loader
- Parallel
Open Collector
Optical IrDA
- integrated in
Cashless reader
Clock/calendar:
- discounts
- free vend
- free
Contactless key:
- transponder
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off:
- discounts
- free vend
- free
Coins channels
30
Banknote reader
- parallel
- impulse
P3000
- configurations
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
Data Key
- configurations
- Audit reading
Display
- 5-figure LCD
Black List
- 500
Laser Check
COIN VALIDATORS
7171
COIN VALIDATORS
GIODY LITE
Cod. GD128EU8050...................................................................
Cod. GD155EU8050...................................................................
Cod. GD101EU8050...................................................................
LASER CHECK
GIODY LITE adapt.Saeco7P transf
GIODY LITE adapt.24V 16p.4 coin
GIODY LITE Executive EURO 24V
Power input: 24V AC nom, From 18.5V to 42V DC
Consumption: max. output: 10 W
Temperature: range: 0° - 50°C
Dimensions (WxHxD)
Reader: 120x50x102 mm /internal machine area
Front panel: 63x155x30 mm /max. overall dimensions
Assembly: with front panel, fixed with 4 x M4 nuts
Weight: 0.4 Kg
Characteristics
Serial protocols:
- Executive
- MDB/ICP
- BDV001
Operating modes:
- loader
- Parallel
Open Collector
AUDIT:
- EVA-DTS standard
Coins channels
30
Optical IrDA
- integrated in
Cashless reader
Contactless key:
- transponder
72
Banknote reader
- parallel
- impulse
P3000
- configurations
- IR reader
- coin programming
PC
- configurations
- Audit reading
- coin programming
Palmtop
- configurations
- Audit reading
SIB
- FW update
Data Key
- configurations
- Audit reading
Display
- 5-figure LCD
Black List
- 150
COIN VALIDATORS
Catalogue
2008/2009
Comparative
commercial table for GIODY systems
MODEL
GIODY
GIODY LITE
Laser technology
COIN VALIDATORS
30
30 Coin channels
Executive Master
Price Holding
MDB Master
-
-
-
-
/
-/
500
150
MDB Slave
BDV001 Master
BDV001 Slave
Loader
Transponder key
Mifare key/card
Banknote reader
PC management 1
SIB
Data Key
-
Clock/Calendar
Integrated/external IrDA
Black List elements
Standard AUDIT
Full AUDIT 3
-
7-segment LCD
-
Times
-
Promotional sales
/
/-
- Unavailable
1
2
3
Requires serial PC interface (CIC1/RS232 or UIC1/USB)
Requires Optical IrDA
Compatible with “AUDIT VIEW”
COIN VALIDATORS
7373
COIN VALIDATORS
F20 EVOLUTION
Cod. 3.202.100. ..............................................................................
Cod. 3.202.98...................................................................................
Coin validator with low front panel
Coin validator with high front panel
Machine interface
• 6-coin output
Power supply
24V DC / 300 mA max
12V DC / 450 mA max
70 mA in standby
Outputs
• Standard: 6 lines / 6 coins / 100 ms
• 50V @ 500mA max
• Combined: 6 lines in binary combination /
14 coins (EURO)/time operation 100 ms.
Coins
• Adjustment tolerances of acceptance
(delta) for each coin
Software: on-board auto-programming
Coin validator dimensions (H x W x D): 102 x 54 x 88.5 mm
Weight: 330 g
ccTalk
communication
protocols
Cod. 3.202.101. ..................................................................................
74
COIN VALIDATORS
USB
with interface
F20 EVOLUTION coin validator without front panel
Catalogue 2008/2009
S10 EVOLUTION
S10 ccTalk
Machine interface
• 6-coin output
Power supply
24V DC / 300 mA max
12V DC / 450 mA max
COIN VALIDATORS
Cod. 3.202.93.......................................................................................
Cod. 3.202.92.......................................................................................
70 mA in standby
Outputs: ccTalk output protocol
Coins
• Adjustment tolerances of acceptance (delta) for each coin
Software: on-board auto-programming
Cod. 3.202.103. ..................................................................................
Cod. 3.202.104. ..................................................................................
X2
X2 ccTalk
Dual electromagnets for coin standby. Particularly suitable for the GAMING sector,
lets you use one less Hopper.
The general characteristics are the same as the previous model.
50 CENT STOP
The innovative concept of the X2 is shown in the 2 sequences below: in the first
sequence when the first 50cent coin is introduced, it is parked and then after the
second coin is introduced both coins are accepted simultaneously. If no coin is
introduced within 6 seconds after the first coin, the first will be released.
In the case of a blackout the parked coin is always returned.
ccTalk
communication
protocols
In the second sequence, when the first 50cent coin is introduced it is parked. If we
introduce a different value coin (€1 or €2), both coins will be returned.
COIN VALIDATORS
7575
COIN VALIDATORS
Cod. 3.005.07...................................................................................
SU04E 3 way in line sorter + reject
• Universal, suitable for all 3” coin validators
• Tubes fixing bracket (optional)
• Driven guided rack system
Cod. 3.005.09...................................................................................
SU04E 3 way sorter + reject
• Universal, suitable for all 3” coin validators
• Tubes fixing bracket (optional)
• Driven guided rack system
76
COIN VALIDATORS
Catalogue 2008/2009
Cod. 3.202.59.........................................................................
Val. EMP 800.00 parallel coin validator
• Can be connected to a coin sorter
• Auto-programmable token
• 50 ms impulses output
Cod. 3.202.76.........................................................................
Val. EMP 800.00/E parallel coin validator with extended temperature and humidity range
• Can be connected to a coin sorter
Cod. 3.202.52.........................................................................
Val. EMP 800.01 dual price stepper
• Can be connected to a display
Cod. 3.202.81.........................................................................
Val. EMP 800.07 with timer
• Output enabled for a time proportional to coin insertion
• Can be connected to a display
Optional:
- ccTalk version
- USB version
- Version with metal front plate (H 117mm)
- Optional battery-powered
43
63
43.5
41
39
A
12.8
USB
70.4
ccTalk
communication
protocols
A: coin insert
B: coin reject button
C: coin reject
D: coin intake
140
155
144
20
105
B
Ø 4.5
34.5
C
6
6
D
95
COIN VALIDATORS
7777
COIN VALIDATORS
12VDC electronic coin validator with standard front plate (H = 155 mm)
COIN VALIDATORS
12VDC electronic coin validator with low front plate (H =115 mm.)
Cod. 3.202.61.....................................................................
Cod. 3.202.55.....................................................................
Val. EMP 890.00/E parallel coin validator with extended temperature and humidity
range
Optional:
- Dual price stepper version, with timer and ccTalk
- Optional battery-powered
62.7
99.1
6
49.9
Ø4
102
105
B
114.7
A
A: coin insertion
B: coin reject button
C: coin reject
D: coin intake
C
D
12VDC electronic coin validator without front plate
Cod. 3.202.53.....................................................................
• Reject on front plate
A
E
89
28
102
92
5°
D
78
COIN VALIDATORS
6.5
C
54
A: coin insertion
C: coin reject
D: coin intake
E: expulsion unitlever
Catalogue 2008/2009
12VDC electronic coin validator for video games
Cod. 3.202.73.........................................................................
Val. EMP 830.13 ccTalk
Cod. 3.202.62.........................................................................
COIN VALIDATORS
• bottom-rear coin reject
• can be connected to SRT 400, SRT 500 coin sorters
• Bottom-rear coin reject
• Can be connected to SRT 400, SRT 500 coin sorters
A
E
28
89
102
A: coin insertion
C: coin reject
D: coin intake
E: expulsion lever
D
C
6.5
54
92
5°
54
12VDC electronic coin validator with 5” adaptor
Cod. 3.202.57........................................................................
VAL. EMP 800.00 V5 with 5” adapter
Patented
• Power Input: 8-26VDC
• Power consumption: less than 40 mA in standby, 350 mA at intake
• Coin diameter rating: 31.5 mm max
• Coin thickness rating: 3.2 mm max
• Operating temperature: from +10°C to +70°C)
• Number of outputs: 6-8 plus totalizer (parallel)
• Sophisticated reading system
• High temperature resistant plastic
• Dimensions: 102x89x52 mm.
• Weight: 240 g
COIN VALIDATORS
7979
COIN VALIDATORS
Electronic coin validator with 24VDC adaptor and 5’’ adaptor
Cod. 3.202.54.....................................................................
Val. EMP 800.00 V5 with 5” adapter and 24VDC adapter
24VDC adaptor for EMP 8x0.00V5 parallel coin validator
Cod. 2.514.133..................................................................
DS010/B
24V electronic coin validator in changegiver format for Automatic Vending
Machine
Cod. 3.202.56.....................................................................
Parallel: VAL. EMP 800.00 with 24VDC adaptor and case with frame and coin
chute
Cod. 3.202.63.....................................................................
Executive: VAL. EMP 800.00 with 24VAC executive adaptor and case with frame
and coin chute
80
COIN VALIDATORS
Catalogue 2008/2009
Mechanical coin validator
Val. W UNIVERSAL N1-WK-AFK S6H programmed for €0,50
(metal front plate 150 x 50 mm)
Cod. 3.202.80.........................................................................
Val. W UNIVERSAL D-WK-AFK-S6H programmed for €0,50
(metal front plate 117 x 60 mm)
COIN VALIDATORS
Cod. 3.202.79.........................................................................
Optional:
- Programming for other coins or tokens
- Other configurations for front plate / microswitch / blocking coil
Electronic coin validator for automatic washing machines
VAL. EMP 500 o
• Mechanically compatible with mechanical coin validators
• 11VAC - 24VAC / VDC
Optional:
- optoisolated outputs or state solid relay version
57
117.6
19.5
9
85
Ø 30
max
81.7
4
6
R
3
80.5
51
92.3
Cod. 3.202.64.........................................................................
COIN VALIDATORS
8181
COIN VALIDATORS
CH 800 complete coin handling solution
Complete coin handling solution for indoor and outdoor machines, consisting of:
• Frame: (CH801, CH802.1, CH802.3)
• Electronic antipin system: system that prevents the introduction of foreign bodies,
providing an additional safety level (ESOO3.S, ES003.F, ES003.A)
• Electronic coin validator (EMP820.XX, EMP860.XX)
• Escrow: fraud-prevention pre-vend coin storage system.
Any interruption of the vending process results in all coins being rejected (E105,
E108)
Cod. 2.567.01.....................................................................
CHASSIS
CH801 (manually operated reject)
Cod. 2.567.03.....................................................................
CH802.1 (motorised reject)
Cod. 2.567.04.....................................................................
CH802.3 (motorised reject with EMR100 motor)
Electronic anti-pin system
Cod. 3.006.01.....................................................................
ES003.S: slot can be opened using an external
controller
Cod. 3.006.02.....................................................................
ES003.F: with anti-strimming sensor
Cod. 3.006.00.....................................................................
ES003.A: automatic slot opening
82
COIN VALIDATORS
Catalogue 2008/2009
Electronic coin validator:
EMP 820.XX
EMP 860.XX: electronic coin validator.
This coin validator opens completely
to remove jammed coins easily.
COIN VALIDATORS
Cod. 3.202.105......................................................................
Cod. 3.202.106......................................................................
N.B.: every kind of electronic interface
available (parallel, ccTalk, etc)
A
A: coin insertion
B: coin reject
C: coin acceptance
B
C
ESCROW
Cod. 2.543.35.........................................................................
Cod. 2.543.46.........................................................................
E108: Solenoidsolenoid-driven
E105 Motormotor-driven
COIN VALIDATORS
8383
COIN VALIDATORS
Cod. 3.005.02......................................................................
SRT 400 – 3 way sorter
SRT 400
- 3 in line ways + reject
- Universal, suitable for all 3” coin validators
- Tubes fixing bracket (optional)
Suitable for parallel and ccTalk coin validators, model:
- EMP830 = without front plate, coin insertion on top
Cod. 3.005.01......................................................................
Tubes bracket art. 2040 for SRT 400 sorter
A: coin acceptance
B: coin reject
184,5
97
52
27,7
11,5
A
Cod. 3.005.03......................................................................
A
A
B
53,3
162
SRT 500 – 3 way sorter
SRT 500
- 3 in line ways + side reject
- Universal, suitable for all 3” coin validators
Suitable for parallel and ccTalk coin validators, model:
- EMP830 = without front plate, coin insertion on top
97
163
A: coin acceptance
B: coin reject
52
25,2
A
A
84
COIN VALIDATORS
A
B
20
122,25
51,55
Catalogue 2008/2009
Cod. 3.005.04 ........................................................................
SRT 800.2
- 2 in line ways
Cod. 3.005.00 ........................................................................
SRT 800.3
- 3 way (2 in line + 1 on side)
COIN VALIDATORS
SRT 800- Sorter for EMP 800 series coin validators
Suitable for parallel and ccTalk coin validators, models:
- EMP800 = standard front plate, h. 155, reject on front plate
- EMP850 = metal front plate, h. 117, reject on front plate
- EMP890 = low front plate, h. 115, reject on front plate
Coin validator to be programmed in-house
39
132,5
95
12,8 34,5
B
105
70,4 20
A
C
A: coin insertion
B: button expulsion
C: coin reject
D: coin acceptance
6
D
D
D
SRT 820 - Sorter for EMP 820 coin validators
Cod. 3.005.05 ........................................................................
SRT 820.2
- 2 in line ways
Cod. 3.005.06 ........................................................................
SRT 820.3
- 3 way (2 in line + 1 on side)
Suitable for parallel and ccTalk coin validators
Suitable for frame assembly
Coin validator to be programmed in-house
A
A: coin insertion
B: coin reject
C: coin acceptance
B
C
C
C
COIN VALIDATORS
8585
COIN VALIDATORS
5” electronic coin validator with built-in sorter
Cod. 3.202.82.....................................................................
EMP. 900 V5
- 5 way sorter
- Bottom reject
- Proprietary MDB / ccTalk
A: incasso
B: scarto moneta
C, D, E, F: tubi moneta
86
COIN VALIDATORS
Catalogue 2008/2009
Mechanical 3” - 5” Nylon adaptor for coin validator
Patented
- 3” - 5” adaptor for G13-AL05-SR3-RM5 coin validator (min. 500 pieces)
- 3” - 5” adaptor + 24VDC adaptor for G13-AL05-SR3-RM5 coin validator (min. 500
pieces)
Optional:
Can be fitted with the 24VDC adaptor, Code 2.514.133
Cod. 2.547.18........................................................................
Standard Nylon case for 5” coin validator and Nylon coin chute
Cod. 2.514.93.........................................................................
DS008
4-price board for coin stepper/validator or parallel coin validator, and for the
GENIUS PL system.
To use a parallel coin validator/stepper with electromechanical machines.
When ordering, indicate the relevant input voltage (230/115/24VAC)
Cod. 3.502.68.........................................................................
Interface for GENIUS and coin validators on LAVAZZA PININFARINA dispenser.
For connection with GENIUS PL system and with 2-price 12 VDC coin stepper/
selector.
Optional: tokens, token entries, token acceptors
COIN VALIDATORS
8787
COIN VALIDATORS
Cod. 2.033.68.........................................................................
Notes:
88
COIN VALIDATORS
BANKNOTE AND CARD READERS
VENDING
GAMING
LAUNDRY
CAR WASH
RETAIL/KIOSK
HEALTHCARE
89
“JCM” series
Cod. 3.405.35.....................................................................
EBA03 banknote reader
• 4 way acceptance of banknotes
• Banknote width: 60 - 72 mm (€5,00, €10,00, €20,00)
• On-board diagnostics
• On-site configuration
• Plastic casing
• Removable stacker
• Optical and magnetic sensors
• Input: AC 24V - DC 34V
Cod. 3.405.49.....................................................................
Cod. 3.405.50.....................................................................
TAIKO banknote reader
TAIKO pulse
TAIKO ccTalk
• Banknote width: max 82 mm (€5,00, €10,00, €20,00)
• Plastic casing
• Impulse, serial, ccTalk and MDB integrated protocols, selected using Dip Switches
• Multicoloured illuminated note entry
90
Catalogue 2008/2009
“JCM” serie
Cod. LB. 02508(MDB).......................................................
DBV301 UP reader
Cod. LB. 02740 (PULSE).................................................
Stacker up reader with 250 note cashbox capacity
Cod. LB 02660 (MDB).......................................................
• Cash box included
• Plastic casing
• Stacker capacity - 200 banknotes
DBV301 DOWN reader
Banknote reader with stacker (complete with harness)
Stacker down reader with 250 note cashbox capacity
9191
“ICT” series
Cod. 3.405.47.....................................................................
L83 banknote reader
• Banknote width: 60 - 85 mm (€5,00, €10,00, €20,00, €50,00 €100,00)
• Plastic casing
Optional:
- Complete with harness
Cod. LB.027.06. .................................................................
P77 banknote reader
• Plastic casing
Optional:
- With metal front plate
Cod. 3.405.53.....................................................................
L70 banknote reader
• Plastic casing
Optional:
92
Catalogue 2008/2009
“ICT” series
Cod. 3.405.18.........................................................................
UP A7/V7 reader
Stacker up with 250 note cashbox capacity
• Plastic casing
• Stacker capacity - 200 banknotes
Optional:
Cod. 1.602.04.........................................................................
Cod. 1.602.05.........................................................................
Banknote dispenser
Model ND 300KM
Model ND 300CM
• Euro banknote dispenser
• Maximum capacity 250 banknotes
• Optical sensor detects each single banknote
• Fast, high performance banknote dispenser.
• Dimensions (mm) (H x W x D): 119 x x 26 x 145
• Weight (Kg): 1.5
• Power Input: 12 VDC
• Power output: max 10 W
• Operating temperature: from 0 °C to +55 °C
• Dispensing speed: 1 sec.
• Relative humidity: 30 ÷ 90% (condensate free)
• Interfaces: impulse and RS 232
• Banknote capacity: 300
mod. ND 300KM
mod. ND 300CM
9393
“ICT” series
Cod. 3.405.28.....................................................................
Cod. 3.405.29.....................................................................
Cod. 3.405.21.....................................................................
VECTOR banknote reader (complete with harness)
VECTOR pulse reader, 12 VDC
VECTOR parallel reader, 12 VDC
VECTOR MDB reader, 20.5 - 42 VDC
• Banknote width: 60 - 85 mm (€5,00, €10,00, €20,00, €50,00 €100,00)
Optional:
- USB, ccTalk, RS-232, MDB battery interfaces
- External 100-240 VAC power supply
- UV magnetic sensors
- Universal, pressure die-cast aluminium slot
MATRIX UP (complete with harness)
Reader with up-staking, and 250 banknotes capacity
Cod. 3.405.24.....................................................................
Cod. 3.405.26.....................................................................
Cod. 3.405.22.....................................................................
MATRIX UP pulse reader, 12 VDC
MATRIX UP parallel reader, 12 VDC
MATRIX UP MDB reader, 20.5 - 42 VDC
MATRIX DOWN (complete with harness)
Stacker down with 250 note cashbox capacity
Cod. 3.405.25.....................................................................
Cod. 3.405.27.....................................................................
Cod. 3.405.23.....................................................................
MATRIX DOWN pulse reader, 12 VDC
MATRIX DOWN parallel reader, 12 VDC
MATRIX DOWN MDB reader, 20.5 - 42 VDC
Optional:
- USB, ccTalk, RS-232, MDB battery interfaces - external 100-240 VAC
power supply
- UV magnetic sensors
- Pressure die-cast aluminium slot
94
Catalogue 2008/2009
“ICT” series
MATRIX Cash box (UP and DOWN)
Cod. 3.401.05.........................................................................
Cod. 3.401.03.........................................................................
Cod. 3.401.04.........................................................................
Capacity 250 banknotes
Capacity 600 banknotes
Capacity 1,000 banknotes
Cod. 2.033.77.........................................................................
Optional:
- Option padlock for 600 -– 1,000 banknote models
- Software with PC connecting cable
VECTOR/MATRIX reader programming Kit
The kit includes:
• 1 RS-232/reader interface cable
• CD with programming software
• 2 calibration sheets
9595
Cod. 3.405.52.....................................................................
Universal smart/chip card reader
• Operational capacity: 5,000,000 cycles
• Contacts: contactless (no card wear)
• Operating temperature: from -10°C to +70 °C
• Power consumption in standby: 20 mA
• Power consumption (operational): 50 mA
96
“TRIO”
“TRIO” - INTEGRATED PAYMENT UNIT
VENDING
GAMING
CAR WASH
RETAIL/KIOSK
TRIO - INTEGRATED PAYMENT UNIT (3 products in one)
The TRIO integrated payment system combines three main functions: coin validator,
sorter, and coin Hopper.
The compact dimensions and precise design make installation and maintenance
easy, simplifying the construction and wiring of the machine.
The system is based on the ccTalk serial communication protocol and meets the
tamper proof requirements of Italian law 326.
TRIO is equipped with a flat 10 pole male connector for ccTalk communication, and a
USB peripheral type connector, with virtual serial ports.
All the operating parameters can be managed using the dedicated software on a PC.
INTERNATIONAL PATENT PENDING
Sectors of use:
-Gaming
-Kiosks
-Payment stations
-Teller machines
-Changemachines
-Vending Machines
97
Cod. 1.607.01.....................................................................
TRIO 24 VDC
Electrical specifications:
24 VDC
• Input voltage: +/- 10 %
Power consumption:
• Standby 100 mA
• In service (empty): 200 mA
• Maximum consumption: 600 mA
• Forced stoppage (transitory): 1,200 mA
Characteristics
98
Multisize
PC
- configurations
System security
ccTalk
communication
protocols
Cost savings
Coins channels
16
“TRIO”
- INTEGRATED
PAYMENT
SYSTEMS PAYMENT UNIT
USB
“TRIO”
Catalogue 2008/2009
This integrated payment system is covered by an international patent and has been
designed to integrate mechanical and electronic systems to provide the functions of a
coin validator, sorter and coin Hopper in one single product, with evident advantages
in terms of costs and installation in particular.
“TRIO” - INTEGRATED
PAYMENT
UNIT
PAYMENT
SYSTEMS
99
Notes:
100
“TRIO”
- INTEGRATED
PAYMENT
SYSTEMS PAYMENT UNIT
HOPPERS
EROGATORI MONETE
“HOPPERS” and “MINIHOPPERS”
VENDING
GAMING
CAR WASH
HOPPER MULTISIZE HS, HPRO, USB, HOPPER with agitator
This line of Hoppers has been designed to make maintenance as simple as possible.
The series uses the exclusive TWIN CONNECTION system which offers the choice
of having the coin output on the front or side of the Hopper, for a variety of simplified
configurations and installation solutions.
Some of the main characteristics are:
- Anti-cheat system against sensor darkening
- Double payout sensor
MINIHOPPER F1S, F1PRO and MULTICOIN
MINIHOPPERS are equipped with the TWIN CONNECTION system so you can
install two Hoppers side-by-side with a single coin outlet, with evident installation
advantages.
Some of the salient features of this series are:
- Payout speed
- Guaranteed continuous payout, thanks to an exclusive patented spinning disc and dejamming feature.
- Full compatibility with market standards.
- Dual photocell
EROGATORI MONETE
101
HOPPERS
HOPPER MULTISIZE HS and HPRO (pack of 10) Patented
Cod. 1.603.54.....................................................................
Cod. 1.603.24.....................................................................
Cod. 1.603.35.....................................................................
Cod. 1.603.23.....................................................................
Parallel:
HS 2012 (standard) 12 VDC
HS 2012 (reverse) 12 VDC
HS 2024 (standard) 24 VDC
HS 2024 (reverse) 24 VDC
Cod. 1.603.18..................................................................
Cod. 1.603.60.....................................................................
Cod. 1.603.42.....................................................................
Cod. 1.603.55.....................................................................
ccTalk:
HPRO 2012 (standard) 12 VDC
HPRO 2012 (reverse) 12 VDC
HPRO 2024 (standard) 24 VDC
HPRO 2024 (reverse) 24 VDC
• Exclusive patented TWIN CONNECTION system (single payout with Hoppers
coupled by kit - Code 2.033.100)
• Standard and reverse installation model
• Service Led
• Auto-diagnostics with error indication
• Available with 24 and 12 VDC motor
• Easy maintenance
• 34 commands parallel and ccTalk protocol
• ccTalk address through on-board Dip Switch
• Dejamming feature
• Automatic stop when Hopper is empty
• Auto-unblocking system
• Double payout sensor
• Anti-cheat system against sensor darkening
• Suitable for coins and tokens with a 21.01 - 30.5 mm diameter and 1.60 - 3.30 mm
thickness
• Base plate
• Capacity: up to 1,800 pieces
• Empty/full sensors
Optional:
- Version with small belt for coins and tokens with a 16.25 - 21.25 mm diameter and 1.00 - 2.20 mm thickness
- Mechanical agitator
Characteristics
Multisize
USB
ccTalk
communication
protocols
Standard
Electronic
card with
double
photocell
Standard/reverse
Coin
output
Reverse
102
EROGATORI MONETE
Catalogue 2008/2009
HOPPER MULTISIZE HPRO - USB version (pack of 10) Patented
Cod. 1.603.58.........................................................................
Cod. 1.603.59.........................................................................
Cod. 1.603.56.........................................................................
Cod. 1.603.57.........................................................................
USB:
HPRO 2012 (standard) 12 VDC USB
HPRO 2012 (reverse) 12 VDC USB
HPRO 2024 (standard) 24 VDC USB
HPRO 2024 (reverse) 24 VDC USB
Characteristics
ccTalk
communication
protocols
EROGATORI MONETE
USB
Cod. 2.537.10.........................................................................
Expansion
Cod. 2.033.100......................................................................
Conveyor kit for HOPPER TWIN CONNECTION
Some examples of coin outputs
(TWIN CONNECTION system)
TWIN CONNECTION
EROGATORI MONETE
103
103
HOPPERS
MINIHOPPER F1S, F1PRO, F1M (pack of 10) Patented
Cod. 1.604.02.....................................................................
Cod. 1.604.03.....................................................................
Parallel:
F1S 1012 12 VDC
F1S 1024 24 VDC
Cod. 1.604.00.....................................................................
Cod. 1.604.01.....................................................................
ccTalk:
F1PRO 1012 12 VDC
F1PRO 1024 24 VDC
ccTalk MULTICOIN:
This version can manage 2 different types of coins simultaneously, to count and calculate
the required payment made using mixed coins
Cod. 1.604.08.....................................................................
Cod. 1.604.09.....................................................................
F1M 1012 12 VDC
F1M 1024 24 VDC
• Special patented spinning payout disc
• TWIN CONNECTION system (single payout with coupled Hoppers)
• Service Led
• Auto-diagnostics with error indication
• Available with 24 and 12 VDC motor
• Easy maintenance
• 34 commands parallel and ccTalk protocol
• ccTalk address through on-board Dip Switch
• Dejamming feature
• Auto-unblocking system
• Mechanical agitator
• Double coin output sensor
- Anti-cheat system against sensor darkening
• Suitable for coins with a 19 - 29 mm diameter and 1.65 - 3.3 mm thickness
• Quick-fit assembly plate with numerous fixing possibilities
• Capacity: 350 - 700 coins (depending on Ø and thickness)
Optional:
- Coins high level sensor
Characteristics
Multisize
USB
ccTalk
communication
protocols
Doppia fotocellula
Our models use the TWIN CONNECTION system
(single payout with coupled Minihoppers) to have
a single exit point with various values.
104
EROGATORI MONETE
TWIN CONNECTION
SINGLE
Catalogue 2008/2009
MINIHOPPER F1S, F1PRO and F1M USB version (pack of 10)
Cod. 1.604.30.........................................................................
Cod. 1.604.29.........................................................................
F1PRO 1012 12 VDC USB
F1PRO 1024 24 VDC USB
Characteristics
ccTalk
communication
protocols
EROGATORI MONETE
USB
Cod. 3.002.02.........................................................................
Scale for MINIHOPPER
EROGATORI MONETE
105
105
HOPPERS
Cod. 1.604.10.....................................................................
Cod. 1.604.11.....................................................................
Cod. 1.604.12.....................................................................
Cod. 1.604.06.....................................................................
Cod. 1.604.13.....................................................................
Cod. 1.604.14.....................................................................
Front expansion model F1S/EF 1012 12 VDC
F1S/EF 1024 24 VDC
F1PRO/EF 1012 12 VDC ccTalk
F1PRO/EF 1024 24 VDC ccTalk
F1M/EF 1012 12 VDC ccTalk
F1M/EF 1024 24 VDC ccTalk
}
MULTICOIN
Also available in USB version
Cod. 1.604.15.....................................................................
Cod. 1.604.16.....................................................................
Cod. 1.604.17.....................................................................
Cod. 1.604.07.....................................................................
Cod. 1.604.18.....................................................................
Cod. 1.604.19.....................................................................
Side expansion model
F1S/EL 1012 12 VDC
F1S/EL 1024 24 VDC
F1PRO/EL 1012 12 VDC ccTalk
F1PRO/EL 1024 24 VDC ccTalk
F1M/EL 1012 12 VDC ccTalk
F1M/EL 1024 24 VDC ccTalk
}
MULTICOIN
Cod. 1.604.20.....................................................................
Cod. 1.604.21.....................................................................
Cod. 1.604.22.....................................................................
Cod. 1.604.23.....................................................................
Reduced space model
F1S/S 1012 12 VDC
F1S/S 1024 24 VDC
F1PRO/S 1012 12 VDC ccTalk
F1PRO/S 1024 24 VDC ccTalk
Characteristics of expansion and reduced space models
Multisize
106
EROGATORI MONETE
USB
ccTalk
communication
protocols
VENDING
GAMING
LAUNDRY
RETAIL/KIOSK
MD-1000 MOTOR DISPENSER
The MD-1000 motor dispenser is designed to meet
the requirements of the manufacturers of games
machines, cigarette machines and box dispensers.
The easy connection makes it highly versatile and
suitable for all types of electronic control board.
Designed for easy maintenance, high reliability and
simple installation.
ADJUSTABLE SILOS
Silos available in 2 models:
- short adjustable
- long adjustable
The silos can be adjusted on the basis of the
specific box size to supply.
107
MOTOR DISPENSER MD-1000
(pack of 50)
Cod. 2.543.27.....................................................................
Cod. 2.543.28.....................................................................
Cod. 2.543.29.....................................................................
Cod. 2.543.30.....................................................................
Cod. 2.543.31.....................................................................
Cod. 2.543.32.....................................................................
MOTOR DISPENSER MD-1012 (oblique stop - rear sensor)
MOTOR DISPENSER MD-1112 (oblique stop - forward sensor)
MOTOR DISPENSER MD-1212 (vertical stop - backward sensor)
MOTOR DISPENSER MD-1312 (vertical stop - forward sensor)
MOTOR DISPENSER MD-1412 (oblique stop - coupled sensor)
MOTOR DISPENSER MD-1512 (vertical stop - coupled sensor)
• 3 settable driving ways
• 6 available models
• 3 product sensor configurations: - backward position - forward position - coupled
• 2 options for motor stopping position
• Power Input: 12VDC ± 10%
• Operating temperature: from 0°C to +50°C
MOTOR DISPENSER MD-1000 ccTalk
(pack of 50)
Cod. 2.543.37.....................................................................
Cod. 2.543.38.....................................................................
Cod. 2.543.39.....................................................................
Cod. 2.543.40.....................................................................
Cod. 2.543.41.....................................................................
Cod. 2.543.42.....................................................................
MOTOR DISPENSER MD-1012 ccTalk (oblique stop - backward sensor)
MOTOR DISPENSER MD-1112 ccTalk (oblique stop - forward sensor)
MOTOR DISPENSER MD-1212 ccTalk (vertical stop - backward sensor)
MOTOR DISPENSER MD-1312 ccTalk (vertical stop - forward sensor)
MOTOR DISPENSER MD-1412 ccTalk (oblique stop - coupled sensor)
MOTOR DISPENSER MD-1512 ccTalk (vertical stop - coupled sensor)
• On-board Dip Switch for address selection
• Can be connected to external key (external version only)
• Can be connected to bicolour LED (complete version only)
• 6 available models
• 3 product sensor configurations: - backward, - forward, - combined
S1
S4
S4
S3
S3
MD1012
OBL I QUE STO P
Belt direction
V ERTI C AL S TOP S2
ccTalk
communication
protocols
DE
LS
MD1212
BA C K WA R D S E N S O R S 1
MD1412
S4
S4
S2
MO
S3
MD1112
S1
MD1312
F O RWA R D S E N S O R S 4
S1
S2
S2
MD1512
COUPLED SENSOR S1,S4
The drawings refer to the internal side of the board
108
S1
Catalogue 2008/2009
Cod. 2.557.32........................................................................
166
Short adjustable “SILOS”
• 5 adjustments to change size
• Wide range of adjustment for dispenser connection
• Grey ABS
300
549
166
155
82
82
155
Cod. 2.557.31.........................................................................
Long adjustable “SILOS”
• 5 adjustments to change size
• Wide range of adjustment for dispenser connection
• Grey ABS
166
300
549
166
155
82
82
155
1
2
MAXIMUM ADJUSTMENT
FOR SIZE CHANGE
3
5
L
H
4
- Minimum product size:
H (10) x W (45) x D (73)
- Maximum product size:
H (50) x W (72) x D (145)
P
109
109
UNIVERSAL ccTalk TESTER
Universal tester for ccTalk systems
Cod. 2.025.02.....................................................................
Universal ccTalk TESTER
PC interface for checking the functions of ccTalk serial protocol peripherals such as
Hoppers, Minihoppers, Coin validators, and Motor Dispensers.
Power input: 24VAC
Connectors:
- RS-232 for PC connection
- Box 10 for 24VDC ccTalk Hopper (e.g.: Hopper HPRO2024, Hopper F1PRO1024)
- Box 10 for 12VDC ccTalk Hopper (e.g.: Hopper HPRO2012, Hopper F1PRO1012)
- JST 4-pole for 12VDC coin validators and ccTalk Motor Dispenser
(e.g. EMP830.13v5, MD-1000 ccTalk)
Accessories included:
• 24VAC transformer
• PC Software
PC
24VDC
HOPPER,
MINIHOPPER
12VDC
12VDC
HOPPER, Coin Validators,
MINIHOPPER
Motor
Dispensers
Test SOFTWARE for most peripheral devices on the market
110
TESTER UNIVERSALE ccTalk
VIDEOGAMES BUTTONS AND ACCESSORIES
GAMING
Universal Joystick
(pack of 100)
• Contacts: 4 microswitches
• Positions: 4-8 with selector
MOD. 02/P
Joystick MOD. 011
(pack of 100)
• Contacts: 4 sub-miniature switches
• Positions: 8
• Mounting hole: 24 or 29 mm
Universal Joypad MOD. 021
(pack of 100)
BUTTONS AND ACCESSORIES
MOD. 010
• Contacts: 4 microswitches
• Positions: 4-8
Illuminated pushbutton with built-in
lamp MOD. 04
(pack of 1,000)
• Contacts: 1 microswitch
Illuminated 34x34 mm pushbutton,
with built-in lamp MOD. 05
(pack of 1,000)
111
Illuminated 34x48 mm pushbutton, with built-in lamp MOD. 08
(pack of 1,000)
Illuminated 48x48 mm pushbutton with built-in lamp MOD. 09
(pack of 1,000)
Illuminated 34x34 mm pushbutton with built-in lamp MOD. 015
(pack of 1,000)
(pack of 1,000)
(pack of 1,000)
Illuminated 26x32 mm miniature pushbutton MOD. 040
(pack of 1,000)
• Contacts: 1 sub-miniature switch
• Square mounting hole: 22 mm
• Round mounting hole: 24 mm
Vandal-proof button MOD. 01 stainless steel
(pack of 100)
• Round mounting hole: 19 mm
Buttons and tokens
N.B.: on request, PAYTEC can supply different models of buttons and accessories.
112
VIDEOGAMES
BUTTONS AND ACCESSORIES
PAYMENT SYSTEMS
CHANGEMACHINES
CHANGEMACHINES
VENDING
GAMING
LAUNDRY
CAR WASH
CHANGEMACHINES
113
CHANGEMACHINES
SELF STATION CHANGE
Cod. 1.806.18.........................................................................
Outdoor Changemachine
Patented
Versatile and reliable Changemachines for wall or basement mount.
• AISI 304 stainless steel case complete with fixing brackets
• Display
• 1 banknote reader with stacker for 250 banknotes
• Electronic coin validator with extended humidity range
• Automatic-closing acceptor protection door (exclusive PAYTEC patent)
• 1 Hopper
• 3 programming buttons
• Temperature conditioning unit + fan
• LED lighting
• Dimensions: 800x500x550 mm
Optional:
- 2nd Hopper in alternative to 2nd reader
- 2nd reader with banknote stacker
- Printer
- Alarm
- GSM module for alarm notification
- GENIUS: contactless electronic key system
- Basement
405
800
705
500
490
Dimensions
for wall mount
550
510
407
Characteristics
114
GENIUS key
Contactless key:
- transponder
Chip-card
Contactless card:
- Mifare
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
MDB
PC
- config.
- Audit reading
GENIUS Superkey
System security
Clock/calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
HOPPER
CHANGEMACHINES
Catalogue 2008/2009
Cod. 1.504.26.........................................................................
Basement for SELF STATION and SELF STATION CHANGE
Floor-mount basement made of galvanised, painted steel, with security door.
Floor-mount base included.
• Dimensions: 1,907x550x621 mm
621
1907
550
CHANGEMACHINES
550
Base included
CHANGEMACHINES
115
115
CHANGEMACHINES
MINISELF STATION CHANGE
Cod. 1.807.03.....................................................................
Outdoor Changemachine
Patented
Compact case for wall mount (recessed or on wall) or floor mount (on basement):
• Unit with specific treatment suitable for outdoor environments
• Display
• 1 electronic coin validator with extended humidity range
• 1 Hopper
• 3 programming buttons
• LED lighting
• Acceptor compartment door
• Predisposition for one more block with padlock or transversal bar (not supplied)
Optional:
- Automatic blocking patented system on acceptor compartment door (it blocks when lifted, then automatically locks again slowly after a few seconds)
- Alarm
- 2 Minihoppers for dispensing coins (no token dispensing), to replace 1 Hopper
700
Activation and data transmission via radio (optional)
410
Wall mount
Cod. MSS.029.......................................................................
Wall insertion frame for MINISELF STATION
CHANGE and MINISELF STATION
Characteristics
GENIUS key
Contactless
key:
- transponder
Chip-card
Contactless
card:
- Mifare
Banknote
reader
- parallel
- impulse
Coin
validator:
- standard
24VDC
MDB
PC
- config.
- Audit
reading
GENIUS
Superkey
System
security
Clock/
calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
116
CHANGEMACHINES
250
Recessed in wall
HOPPER
Catalogue 2008/2009
Cod. 1.504.29.........................................................................
Floor-mount basement for MINISELF STATION and MINISELF STATION CHANGE
Floor-mount painted steel basement complete with base for anchoring to floor
800
230
CHANGEMACHINES
410
Base included
CHANGEMACHINES
117
117
CHANGEMACHINES
COIN STATION SLIM NEW
Indoor Changemachine “COIN STATION SLIM NEW” - Patented
Cod. 1.503.17.....................................................................
Cod. 1.503.16.....................................................................
Cod. 1.503.18.....................................................................
COIN STATION SLIM NEW 1 EROG/GETT/LETT
COIN STATION SLIM NEW 1 EROG/LETT
COIN STATION SLIM NEW 1 EROG/GETT
Compact tower Changemachines with an ergonomic design complete with 1 Hopper
Cod. 1.503.19.....................................................................
Cod. 1.503.20.....................................................................
Cod. 1.503.21.....................................................................
COIN STATION SLIM NEW 2 EROG/GETT/LETT
COIN STATION SLIM NEW 2 EROG/GETT
COIN STATION SLIM NEW 2 EROG/LETT
Compact tower Changemachines with an ergonomic design complete with 2 Hoppers
• Narrow and tall cabinet designed specifically for installation between two machines
• Banknote reader
• 3 separate, easily accessible compartments with independent anti-drilling locks
• Dimensions: 293x1,320x410 mm (2 Hopper version)
• Dimensions: 256x1,320x410 mm (1 Hopper version)
Optional:
- Display
- 2 buttons (on 2 Hopper version)
painted steel
cabinet
Hopper compartment
trays
for coins
coins/banknotes
acceptance
compartment
banknote
reader
1320
coin validator
out of
order led
cash storage
area
410
Characteristics
Banknote
reader
- parallel
- impulse
118
CHANGEMACHINES
Coin
validator:
- standard
24VDC
ccTalk
communication
protocols
Display
(opzional)
Catalogue 2008/2009
DM series
A minimum order of 10 units is required for the
production of DM Changemachines
Cod. 1.515.02.........................................................................
DM10/1/GETT
Changemachine with 1 Minihopper and coin validator
Cod. 1.515.00.........................................................................
DM10/1/LETT
Changemachine with 1 Minihopper and banknote reader
Cod. 1.515.01.........................................................................
DM10/1/LETT/GETT
Changemachine with 1 Minihopper, banknote reader and coin validator
Cod. 1.507.06.........................................................................
DM100/1/GETT
Changemachine with 1 Hopper and coin validator
Cod. 1.507.04.........................................................................
DM100/1/LETT
Changemachine with 1 Hopper and banknote reader
Cod. 1.507.10.........................................................................
DM100/1/LETT/GETT
Changemachine with 1 Hopper, banknote reader and coin validator
CHANGEMACHINES
• High security cabinet
• Electronic audit with optional Microprinter
• Change dispensed: coins of any diameter from 16 to 28 mm. depending on
thickness (with appropriate dispensing disc)
• 4 programmable bonuses
• Capacity: from 800 to 1,200 coins
• Acceptance: up to 6 types of banknotes or coins
• Output for electromechanical pulse counter
• Power Input: 230 VAC - 50 Hz (optional 115 V or 24 VAC)
• Power consumption: 30VA max
• Operating temperature: from 0°C to+60°C
• Weight (empty): 18 kg
• Mounting: wall
Like previous model
• Change dispensed: coins or tokens (any diameter from 16÷31mm)
• Max. capacity: from 1,000 to 1,500 coins or tokens
• Mounting: wall; with basement
CHANGEMACHINES
119
119
CHANGEMACHINES
Serie DM
Cod. 1.519.04.....................................................................
DM20/2/GETT
Changemachine with 2 Minihoppers and coin validator
Cod. 1.519.00.....................................................................
DM20/2/LETT
Changemachine with 2 Minihoppers and banknote reader
Cod. 1.519.05.....................................................................
DM20/2/LETT/GETT
Changemachine with 2 Minihoppers, banknote reader and coin validator
Like previous model
• Change dispensed: coins of any diameter from 16 to 28 mm. depending on
thickness (with appropriate dispensing disc)
• Capacity: from 1,600 to 2,400 coins
Cod. 1.514.10.....................................................................
DM200/2/GETT
Changemachine with 2 Hoppers and coin validator
Cod. 1.514.00.....................................................................
DM200/2/LETT
Changemachine with 2 Hoppers and banknote reader
Cod. 1.514.09.....................................................................
DM200/2/LETT/GETT
Changemachine with 2 Hoppers, banknote reader and coin validator
• High security cabinet
• Electronic audit with optional Microprinter
• Change dispensed: coins or tokens (any diameter from 16÷31mm)
• Output for electromechanical pulse counter
• Max. capacity: from 2,000 to 3,000 different coins or tokens
• Acceptance: up to 6 types of banknotes or coins
• Power Input: 230 VAC - 50 Hz (optional 115 V or 24 VAC)
• Power consumption: 30VA max
• Dimensions: 550X310X450 mm
• Mounting: wall; on basement
120
CHANGEMACHINES
Catalogue 2008/2009
Serie DM
Cod. 1.509.11......................................................................
DM400/2/GETT
Changemachine with 2 Hoppers and coin validator in large cabinet
Cod. 1.509.04.........................................................................
DM400/2/LETT
Changemachine with 2 Hoppers and banknote reader, in large cabinet
Cod. 1.509.12.........................................................................
DM400/2/LETT/GETT
Changemachines with 2 Hoppers, banknote reader and coin validator, in large cabinet
Cod. 1.510.12.........................................................................
DM400/3/GETT
Changemachine with 3 Hoppers and coin validator in large cabinet
Cod. 1.510.04.........................................................................
DM400/3/LETT
Changemachine with 3 Hoppers and banknote reader, in large cabinet
Cod. 1.510.11.........................................................................
DM400/3/LETT/GETT
Changemachines with 3 Hoppers, banknote reader and coin validator, in large cabinet
Like previous model
• Fully programmable combination of output coins (tokens, bonus, change, etc.)
• Electronic audit on display with optional Microprinter
• Max. capacity: - single Hopper for 1,000 to 1.500 coins or tokens – with expansion unit for 2,000 to 3,000 coins or tokens
• MDB port: connector for any MDB payment system
CHANGEMACHINES
MDB
CHANGEMACHINES
121
121
CHANGEMACHINES
Accessories for changemachines
Cod. 2.136.12.....................................................................
VMC02 ccTalk changemachine board
• Power Input: 24VAC
• Connections:
- Parallel 12VDC coin validator
- ccTalk coin validator
- Pulse banknote reader 12VDC
- ccTalk Hoppers - 12VDC or 24 VDC
- Bicolour led (in service/out of order)
- GENIUS 4/6-figure display
- Electromechanical pulse counter
- External selection button
Characteristics
PC
- config.
- Audit reading
ccTalk
communication
protocols
Display
Cod. 3.503.19.....................................................................
Accessories for VMC02 board
GENIUS portable programmer, necessary for programming the board
Cod. 2.531.15.....................................................................
GENIUS 6-figure Display
122
CHANGEMACHINES
Catalogue 2008/2009
Accessories for changemachines
Cod. 2.537.10.........................................................................
Expansion
Hopper Multisize expansion
Internal temperature conditioning unit
Cod. 2.613.00.........................................................................
GSM module for alarm notification
Cod. 2.613.02.........................................................................
Antenna for data transmission
CHANGEMACHINES
Cod. 2.033.76.........................................................................
CHANGEMACHINES
123
123
Notes:
124
CHANGEMACHINES
AUTOMATIC DISPENSERS
VENDING
HEALTHCARE
PARTNERS FOR CUSTOM PRODUCTS
For years we have been producing dispensers for a
variety of products.
Experience based on the mechanical competence
and constructional skills of the Bologna works.
Thanks to our special partnership with the
multinational SSL International Plc, owner of
the tradename DUREX, we established our own
particular style in the design and production of
dispensers for products in the healthcare sector.
Multi-selection sales stations equipped with every
possible payment system.
Reliable, practical, safe and well-designed.
125
Cod. 1.512.01.....................................................................
CARD DISPENSER DC10/GETT
Automatic ISO-STANDARD card dispenser, with electronic coin validator
Cod. 1.512.00.....................................................................
CARD DISPENSER DC10/LETT
Automatic ISO-STANDARD card dispenser with banknote reader
Cod. 1.602.06.....................................................................
CARD DISPENSER
Card or coupon dispenser with adjustable size and thickness, equipped with sorter
system and Escrow
Cod. 1.602.03.....................................................................
CARD DISPENSER
Card dispenser with adjustable thickness, and sorter system
126
AUTOMATIC
DISPENSERS
PAYMENT
SYSTEMS
Catalogue 2008/2009
Cod. 1.513.08.........................................................................
DEX 50 E
Mechanical condom dispenser (1 product) with electronic coin validator powered by
8 x 1.5 V batteries
• Takes all types of euro coins
• From 5,000 to 10,000 sales with same batteries
• Settable price
• Dimensions: 740x440x250
• Available height: 400 mm
• Standard box dispensed: 12x55x55 mm
• Capacity: roughly 30 standard boxes
• Adaptable to different box sizes
Cod. 1.513.10..........................................................................
DA200 E/GETT/LETT
Electronic condom dispenser (2 products) with electronic coin validator and
banknote reader
Cod. 1.513.11.........................................................................
DA200 E/GETT
Electronic condom dispenser (2 products) with electronic coin validator
Cod. 1.513.12..........................................................................
DA200 E/LETT
Electronic condom dispenser (2 products) with electronic banknote reader
• Capacity: from 50 to 60 standard boxes
• Standard box dispensed: 115x60x18 mm
• Acceptance: up to 12 coins - 6 values
• Power Input: 230 VAC
• Adaptable to different box sizes
DA200 B/VAL.
Electronic condom dispenser (2 products) with coin validator powered by 8 x 1.5 V
batteries
Cod. 1.513.17.........................................................................
PAYMENT
SYSTEMS
AUTOMATIC
DISPENSERS
127
Notes:
128
AUTOMATIC
DISPENSERS
PAYMENT SYSTEMS
ACTIVATION MACHINES
ACTIVATION MACHINES
A wide ranging choice to meet any kind of
requirement.
Simple activation machines with 3 - 16 selections.
LAUNDRY
ACTIVATION MACHINES
Functions:
-Possibility of change given
- Wireless connection and remote control for audit
data and alarms generated.
CAR WASH
ACTIVATION MACHINES
129
ACTIVATION MACHINES
SELF STATION line
Cod. 1.806.17.....................................................................
SELF STATION
Patented
Versatile and reliable recessed activation machine with attractive design for car washes
• Stainless steel cabinet with fixing brackets
• Display
• GENIUS: contactless electronic key system
• Automatic-closing acceptor protection door (exclusive PAYTEC patent)
• 1 changegiver Hopper
• 4 prices
• Emergency stop button
• Reset button
• LED lighting
Optional:
- 2nd banknote reader with stacker for 250 banknotes (aluminium slot)
- 2nd hopperHopper
- Printer
- Alarm
- Basement
405
800
705
500
490
407
550
510
Dimensions for
recessed wall mount
Characteristics
130
GENIUS key
Contactless key:
- transponder
Chip-card
Contactless card:
- Mifare
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
MDB
PC
- config.
- Audit reading
GENIUS Superkey
System security
Clock/calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
HOPPER
ACTIVATION
MACHINES
PAYMENT
SYSTEMS
Catalogue 2008/2009
Cod. 1.504.26.........................................................................
SELF STATION and SELF STATION CHANGE basement
Patented
Painted steel basement, with security door.
Aanchored floor base included
Optional:
- With automatic dispenser
621
1907
550
ACTIVATION MACHINES
550
Base included
ACTIVATION
PAYMENTMACHINES
SYSTEMS
131
ACTIVATION MACHINES
TELE SELF line
TELE SELF - standard version (6 program selection)
Patented
Cod. 1.808.00.....................................................................
• AISI 304 stainless steel control unit with fixing brackets
• Painted steel basement
• Large display
• 1 banknote reader with stacker (250 banknotes)
• Automatic-closing acceptor protection door (patented)
• 1 changegiver/changemachine Hopper
• 6 selections/programmes
• Reset button
• LED lighting
Optional:
- 2nd banknote reader with stacker
- 2nd Hopper
- Printer
- Alarm
- GSM module
- WIRELESS* module (exclusive PAYTEC patent)
500
405
800
705
800
500
407
490
510
550
510
550
407
* Patented Wireless module
The system can be activated and the diagnostics can be run using two-way wireless radio
communication (Tele Self/Portal control unit). This makes installation fast and non-invasive (no chases
need to be cut and no wires need connecting).
Diagnostics transmission (GSM module to be ordered apart).
Installation operating distance between Tele Self control unit and Portal in free area (no obstacles)
max. 100 m
Characteristics
132
Dimensioni per incasso
a muro
GENIUS key
Contactless key:
- transponder
Chip-card
Contactless card:
- Mifare
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
MDB
PC
- config.
- Audit reading
GENIUS Superkey
System security
Clock/calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
HOPPER
Wireless network
ACTIVATION
MACHINES
PAYMENT
SYSTEMS
Catalogue 2008/2009
TELE SELF - special version (14 program selection)
Patented
Cod. 1.808.03.........................................................................
• AISI 304 stainless steel control unit with fixing brackets
• Painted steel basement
• Large display
• 1 banknote reader with stacker (250 banknotes)
• Automatic-closing acceptor protection door (patented)
• 1 changegiver/changemachine Hopper
• 14 selections/programmes
• Reset button
• LED lighting
Optional:
- 2nd banknote reader with stacker
- 2nd Hopper
- Printer
- Alarm
- GSM module
- Antenna for alarms transmission
- WIRELESS* module (exclusive PAYTEC patent)
500
405
800
705
800
500
407
490
Dimensioni per incasso
a muro
510
550
510
550
407
Characteristics
GENIUS key
Contactless key:
- transponder
Chip-card
Contactless card:
- Mifare
Banknote reader
- parallel
- impulse
Coin validator:
- standard 24VDC
MDB
PC
- config.
- Audit reading
GENIUS Superkey
System security
Clock/calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
HOPPER
Wireless network
ACTIVATION
PAYMENTMACHINES
SYSTEMS
ACTIVATION MACHINES
* Patented Wireless module
The system can be activated and the diagnostics can be run using two-way wireless radio
communication (Tele Self/Portal control unit). This makes installation fast and non-invasive (no
chases need to be cut and no wires need connecting).
Diagnostics transmission (GSM module to be ordered apart).
Installation operating distance between Tele Self control unit and Portal in free area (no obstacles)
max. 100 m
133
ACTIVATION MACHINES
Cod. 1.504.26.....................................................................
TELE SELF basement
Patented
Painted steel basement, with security door.
Anchored floor base included.
Optional:
- With automatic dispenser
621
1907
550
550
Base included
134
ACTIVATION
MACHINES
PAYMENT
SYSTEMS
Catalogue 2008/2009
MINISELF line
Cod. 1.807.00.........................................................................
MINISELF STATION
Patented
Versatile and trustable activation machine
• Unit with specific treatment suitable for outdoor environments
• Display
• 1 electronic coin validator with extended humidity range
• 3 buttons/price
• LED lighting
• Acceptor compartment door
• Predisposition for one more block with padlock or transversal bar (not supplied)
Optional:
- Changegiver Hopper (coins or tokens)
- Changegiver Minihopper (coins)
- 4th- 5th- 6th additional button/price
- Patented automatic acceptor compartment door blocking system (it blocks when
lifted, then automatically locks again slowly after a few seconds)
- Emergency stop button
- Reset button
- Alarm
700
Activation and data transmission via radio (optional)
250
410
Wall
mount
Wall insertion frame for MINISELF STATION
CHANGE and MINISELF STATION
Characteristics
GENIUS key
Contactless
key:
- transponder
Chip-card
Contactless
card:
- Mifare
Banknote
reader
- parallel
- impulse
Coin
validator:
- standard
24VDC
MDB
PC
- config.
- Audit
reading
GENIUS
Superkey
System
security
Clock/
calendar:
- discounts
- free vend
- free
GSM/GPRS
- Telemetry
ccTalk
communication
protocols
HOPPER
ACTIVATION
PAYMENTMACHINES
SYSTEMS
135
ACTIVATION MACHINES
Cod. MSS.029.......................................................................
Recessed
in wall
ACTIVATION MACHINES
Cod. 1.504.29.....................................................................
Basement for MINISELF STATION and MINISELF STATION CHANGE
Patented
Floor-mount painted steel basement complete with base for anchoring to floor
800
410
Base included
136
ACTIVATION
MACHINES
PAYMENT
SYSTEMS
230
Catalogue 2008/2009
Cod. 3.501.28.........................................................................
GENIUS code Key
Cod. 3.501.26.........................................................................
GENIUS programming Key
Cod. 3.503.19.........................................................................
GENIUS portable programming device
ACTIVATION MACHINES
Accessories for activation machines
ACTIVATION
PAYMENTMACHINES
SYSTEMS
137
ACTIVATION MACHINES
Accessories for activation machines
Cod. 2.033.76.....................................................................
Internal temperature conditioning unit
Cod. 2.613.00.....................................................................
GSM module for alarm notification
Cod. 2.613.02.....................................................................
Antenna for data transmission
138
ACTIVATION
MACHINES
PAYMENT SYSTEMS
PAYMENT STATIONS
RETAIL/KIOSK
Easycash is a line of payment stations for purchasing or booking self-service
products /services for catering, public offices, hotels, museums, airports, and
discos
Strong cabinet made of painted steel
2 models (tower; wall)
Highly reliable components
Easy access from rear panel
The tower version of Easycash integrates the following payment methods:
• Cashless system: key and/or card (traditional or MIFARE technology)
• Cash system: coin validator, banknote validator, 4 Hoppers for dispensing change
• Pos system: cashpoint /or credit card
Payment slip dispensed, also valid for tax purposes
PAYMENT STATIONS
139
PAYMENT STATIONS
User-configurable interface:
• Program background
• Text colour displayed
• Screen saver (company logo as background)
• Menu structure and images (associate the most appropriate images with the
products on sale)
• Heading to print on sales slip
PAYMENT STATIONS
EASYCASH TOWER
Cod. EC155EU8581............................................................
EASYCASH CASH EU ITX (basic version)
Tower version unit with ergonomic design complete with:
• HOPPERS
• Key and/or card system (traditional or MIFARE technology)
• Banknote reader
• Printed sales slip or receipt
Configuration of the products database with various user levels, discounts, times,
and language settings.
Sale and statistics data management, reports.
Possibility of configuring remote connection for data transmission.
Other configurations available on request
Characteristics
Contactless key:
- transponder
GENIUS key
Chip-card
Contactless card:
- Mifare
Clock/calendar:
- discounts
- free vend
- free
lack List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
Optical IrDA
integrated in
Cashless reader
System security
ccTalk
communication protocols
MDB
Banknote reader
- parallel
- impulse
Coin validator:
- standard 12VDC
Hopper
Changegiver:
Connection to a
changegiver system
P3000:
- configurations
- IR reader
- coin programming
device for GENIUS
systems
PC:
- configurations
- Audit reading
Data Key:
- configurations
- Audit reading
GENIUS Superkey
Wireless network
Cashless
Cellphone
GSM/GPRS
- Telemetry
Coins channels:
30
140
PAYMENT SYSTEMS
STATIONS
PAYMENT
Catalogue 2008/2009
EASYCASH LITE
Cod. EC100EU8051..............................................................
Easycash Lite – wall mount
Wall unit complete with:
• Key and/or card system (traditional or MIFARE technology)
• Printed sales slip or receipt
Configuration of the products database with various user levels, discounts, times, and
language settings.
Sale and statistics data management, reports.
Possibility of configuring remote connection for data transmission.
Characteristics
Contactless key:
- transponder
GENIUS key
Chip-card
Contactless card:
- Mifare
Clock/calendar:
- discounts
- free vend
- free
lack List
- 500
AUDIT:
- EVA-DTS standard
- full
Times
- On/Off
- discounts
- free vend
- free
Optical IrDA
integrated in
Cashless reader
System security
ccTalk
communication protocols
MDB
P3000:
- configurations
- IR reader
- coin programming
Programmatore per
sistemi GENIUS
PC:
- configurations
- Audit reading
Data Key:
- configurations
- Audit reading
GENIUS Superkey
Wireless network
Cashless
Cellphone
GSM/GPRS
- Telemetry
PAYMENT
PAYMENT STATIONS
SYSTEMS
141
PAYMENT STATIONS
Notes:
142

Untitled - S3 amazonaws com

Transcription

Documents pareils

An angler´s paradise

Enabling Capacity on Demand (COD) CPU/Memory Boards on Sun

ironing board

cod maps for blockland

Épreuve de section européenne

Vocabulary about probabilities

Info - Nature`s Harmony

Encoder reader table datasheet

the auditor career game: 30 words you must know Fichier