Machine-tools, utilities and misc.
Transcription
Machine-tools, utilities and misc.
ONLINE AUCTION FAURECIA SAINT-NICOLAS-DE-REDON (FR) Machine-tools, utilities and misc. 29 Rue Tabago - 44460 Saint-Nicolas-de-Redon (Saint-Nicolas-de-Redon) Closing date: Thursday 03 NOVEMBER starting 15:00 Viewing: Wednesday 26 October By appointment 29 Rue Tabago - 44460 Saint-Nicolas-de-Redon (France) Bidding only on the internet! 271011 14.32 www.TroostwijkAuctions.com Thursday 03 November 2011 FAURECIA SAINT-NICOLAS-DE-REDON Specific terms and conditions of the online sale Closing date Viewing only by appointment Company organising this Online Auction markUp VAT Collection only by appointment Viewing Instructions Payment Details Thursday 3 November 2011 starting 15:00 CET Wednesday 26 October 29 Rue Tabago 44460 Saint-Nicolas-de-Redon, France Roux Troostwijk S.V.V. agt 2002-169 1 rue Raoul Follereau 77600 Bussy Saint Georges, France Phone: +33 (0)1 60 94 76 00 Fax: +33 (0)1 60 35 08 91 Email: [email protected] 17.00% 19.60% from Monday 07 November until Friday 02 December 29 Rue Tabago 44460 Saint-Nicolas-de-Redon, France Please note that this concerns an ascending auction sale, preceded by a viewing day. Placing a bid without viewing the equipment is at one’s own risk. Please see articles 3 and 6 of the General Conditions. Your immediate bank payment is required within 48 hours after receipt of the purchase agreement (proforma invoice). Please state your buyer number and the auction name. Banque SOCIETE GENERALE, Neuilly Entreprises, 22 Avenue Charles de Gaulle, 92522 NEUILLY SUR SEINE Code Banque 30003 Code Guichet 03877 Compte nr 01020743074 Clé RIB 50 Collection Instructions Prolongation Lots without bid IBAN FR76 3000 3038 7701 0207 4307 450 BIC SOGEFRPP The buyer needs to take the purchase agreement to the delivery day. The buyer is fully responsible for the dismantling, loading and transportation of the bought lots. Roux Troostwijk cannot accept any responsibility unless indicated otherwise. The delivery (pick-up bought lots) will only take place on the mentioned delivery date/time and address. If a bid is made in the last 5 minutes before the lot closes, the closing time of that lot will be extended with 5 minutes until no bids are made. All lots without any bid will stay open until half an hour after the last closing time bid. From all lots without a bid, the closing time is extended with 30 minutes after the last closing time for lots in that auction. www.TroostwijkAuctions.com Lot 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Number Description Starting Bid 1 Radial Drilling Machine GSP, 405 T 125, serial number 1850, *Radial Drilling Machine including tools 1 Column Drilling Machine IBARMIA SA, A 40, year built 1986, serial number 227G, *Column Drilling Machine, 1320 rpm 1 Bench Grinder MAPE, 203, serial number 7921059, *Bench Grinder, 3000 rpm 1 Band Saw GUINOT, S 400, serial number 70 60, *Band Saw, 220V, 50 Hz 1 Oven CARBOLITE, CWF 11/13, serial number 20.703.970, Oven, 1100°c, 3000W, 230V 1 Grinding Machine MONOPRECIS, RH12, serial number 962, *Grinding Machine, 220V 1 Lathe ERNAULT SOMUA, Cholet 435 KH3, serial number 16520, *Lathe 1 Resistance Test ERNST, Resistance Test incuding table with contains 1 Milling Machine ERNAULT SOMUA, E10Z10, serial number 105570/30, *Milling Machine including ANITAM WIZARD numerical control, table with contains 1 Milling Machine GAMBIN, 3M, serial number 12362, *Milling Machine including AXOM EVOLUTIONS numerical control, table with contains, 2000 rpm, weight: 3800Kg 1 Milling Machine HURON, NU-5, serial number 14480/750451, *Milling Machine including NEWALL C80 numerical control, table with contains 1 Shearing Machine COMESSA, CN306, serial number 2238, *Shearing Machine, dim approximative: 3,50 x 3 x 1,70 meters, 400 Bars 1 Hydraulic Press Break COLLY, 502 A, serial number 1002, *Hydraulic Press Break, 50 T, 230 Bars, 100 mm, 3 phases, 350V, 5CV, Pump: GVF 15 18 15 1 Saw KASTO SEVMO, PSB280U, serial number 102243415, *Saw, motor DIETZ, 2750 rpm, including 2 meters conveyor 1 Finishing Machine *Finishing Machine 1 Drilling Machine CINCINNATI, MT 19, serial number 56669, *Drilling Machine, 4000 rpm, 380V 1 Hydraulic Press FOG, MP 130, *Hydraulic Press, 50 T, 1000 Bars, 205mm 1 Press ENERPAC, C185, *Press, 10000 PSI Max 1 Manual Bender MINGORI, *Manual Bender, 15TON-OB4L 1 Compressor ARMECA, serial number 41152, Compressor, 12 Bars 1 Welding Generator J&H, TUFFER D.245, serial number 65229, Welding Generator including power supply 1 Welding Generator ESAB, MIG 325, serial number 2265291409, Welding Generator including power supply, 40A, 16V-320A, 30V 1 Welding Generator ESAB, LAX 320, serial number 5228221427, Welding Generator, 40A, 16V-320A, 30V, including power supply ESAB MEK 2 800.00 500.00 50.00 400.00 150.00 300.00 500.00 50.00 700.00 800.00 800.00 800.00 500.00 150.00 50.00 250.00 400.00 100.00 100.00 100.00 100.00 100.00 100.00 Lot 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Number Description Starting Bid 1 Welding Generator ESAB, LAX 320, serial number 5227347327, Welding Generator, 40A, 16V-320A, 30V, including power supply ESAB MEK 2 1 Manual Lift Table Manual Lift Table, on wheels, 80 X 50 cm 1 Manual Lift Table Manual Lift Table, on wheels, 80 X 50 cm 1 Manual Lift Table Manual Lift Table, on wheels, 80 X 50 cm 1 Exhausting System CATTINAIR, ZBLC12-4-15, year built 1992, serial number 9623, Exhausting System 1 Working Bench Working Bench, 120 X 100 X 100 cm, including vise 1 Workshop Cupboard Workshop Cupboard, 6 slide doors, 160 X 80 X 200 cm 1 Metallic Working Bench Metallic Working Bench, 200 X 100 X 100cm 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm 1 Welding Work Station Welding Work Station, 160 X 140 X 160 cm 1 Metallic Working Bench Metallic Working Bench, on wheels, 120 X 100 X 100 cm 1 Trolley Trolley, 2 stages, 120 x 80 x 100 cm 1 Sheet Storage Rack Sheet Storage Rack, 7 locations, 200 x 110 cm, sold with contains, PLEASE INSPECT 1 Metals Storage Rack Metals Storage Rack, 24 locations, 7 x stages, 600 X 120 X 230 cm, sold with contains, PLEASE INSPECT 1 Metals Storage Rack Metals Storage Rack 2 sides, 14 locations, 200 X 100 X 180 cm, sold with contains, PLEASE INSPECT 1 Metals Storage Rack Metals Storage Rack 2 sides, 14 locations, 200 X 100 X 180 cm, sold with contains, PLEASE INSPECT 1 Pipes Storage Rack Pipes Storage Rack, 8 locations, 100 X 50 X 200 cm, sold with contains, PLEASE INSPECT 1 Pipes Storage Rack Pipes Storage Rack, 10 locations, 100 X 50 X 200 cm, sold with contains, PLEASE INSPECT 1 Metals Storage Rack Metals Storage Rack, 7 locations, 200 X 80 X 230 cm, sold with contains, PLEASE INSPECT 1 Roller Cabinet FACOM, Roller Cabinet, 5 drawers, 120 X 60 X 100, sold without contains 2 Batch of Ladders Batch of 2 Ladders, 1 X ABA 150 Kg max, 10 steps, 2.75 meters + 1 X 10 steps, 2.75 meters 1 Metallic Working Bench Metallic Working Bench, on wheels, 200 X 110 X 80 cm 1 Workbench Workbench, 2 x drawers, including vise, 150 X 90 X 100 cm, sold with contains, PLEASE 100.00 50.00 50.00 50.00 200.00 80.00 80.00 150.00 80.00 80.00 100.00 80.00 50.00 250.00 500.00 350.00 350.00 200.00 250.00 300.00 100.00 100.00 100.00 120.00 Lot Number Description 48 1 49 1 50 1 51 1 52 1 53 1 54 1 55 1 56 1 57 1 58 1 59 1 60 1 61 1 62 1 63 1 64 1 65 1 66 1 67 4 68 1 Starting Bid INSPECT Metallic Working Bench Metallic Working Bench, 150 X 100 X 100 cm Rolling Workbench Rolling Workbench, 2 drawers, 1 vise, sold with contains, 150 X 90 X 100 cm, PLEASE INSPECT Workbench Workbench, 2 x drawers, 2 slide doors, including vise, 150 X 90 X 100 cm, sold with contains, PLEASE INSPECT Plastic Sink Plastic Sink, waste water reclamation system, 90 x 70 x 120 Cupboard Cupboard, 3 stages, sold with contains, 80 X 55 X 140 cm, BOSCH GWS 10-125C grinder, various tools, PLEASE INSPECT Cupboard Cupboard, 2 slide doors, sold with contains, 300 X 50 X 120 cm, PLEASE INSPECT Workshop Cupboard Workshop Cupboard, 120 X 50 X 190, sold with contains: gauges, drills, various, VEUILLEZ INSPECTER Workbench Workbench, 2 x drawers, including vise, 160 X 100 X 100 cm, sold with contains, VEUILLEZ INSPECTER Workshop Cupboard Workshop Cupboard, on wheels, 2 doors, 2 drawers, sold with contains: gauges and various tools, 120 X 50 X 120 cm, PLEASE INSPECT Workshop Cupboard Workshop Cupboard, on wheels, 2 doors, sold with contains, 120 X 50 X 150 cm, PLEASE INSPECT Workshop Cupboard Workshop Cupboard, 1 door, sold with contains: drills and various, PLEASE INSPECT Wood Cupboard Wood Cupboard, 1 door, sold with contains, 50 x 50 x 120 cm, PLEASE INSPECT Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: drills, taps, various, 120 x 50 x 190 cm, PLEASE INSPECT Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: drills, gears, discs, metrology ,various, 140 x 50 x 200 cm, PLEASE INSPECT Metallic Workshop Cupboard Metallic Workshop Cupboard, 1 door, sold with contains: fastenings ,various, 60 x 50 x 160 cm, VEUILLEZ INSPECTER Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: drills, gears, metrology,various, 140 x 50 x 200 cm, VEUILLEZ INSPECTER Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: metrology,various tools, 140 x 50 x 200 cm, VEUILLEZ INSPECTER Sloping Top Desk MANUTAN, Sloping Top Desk, on wheels, 4 drawers, 50 x 50 x 130 cm Marble MICROPLAN, Marble, 5 stands, 150 x 200 x 30 cm Batch of Rolling Conveyors Batch of 4 Rolling Conveyors, 500 x 60 x 90 cm Metallic Working Bench Metallic Working Bench, 2 drawers, sold with contains: fastenings, tools, various, 120 X 60 X 100 cm, PLEASE INSPECT 100.00 100.00 100.00 100.00 100.00 100.00 250.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 50.00 200.00 100.00 100.00 Lot 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 Number Description Starting Bid 1 Endurance Machine ERI AUTOMATION, year built 1996, serial number 96054, *Endurance Machine, used for dismantling tests, 20 000 cycles, including BRACO arm, horizontal and vertical movement, with out and back plate, SIEMENS SIMATIC OP 17 controller and MEIRI 2680 generator 1 Endurance Machine KEIPER, *Endurance Machine, used with chains, TELEMECANIQUE Control Cupboard 1 Resistance Testing Machine *Resistance Testing Machine, used to frame test 1 Controller MEIRI, 2670, serial number 34058, Controller, 0.5 MV/V-2.1 MV/V, 220V, 50 Hertz 1 Force Gauge Dynamometer ALLURIS, FMI-200-CE, Force Gauge Dynamometer, 20Kg 1 Digital Force Gauge CHATILLON, DFIS 100, Digital Force Gauge, 50 x 0.05kg 1 Digital Force Gauge CHATILLON, DFM 100, Digital Force Gauge 1 Digital Force Gauge CHATILLON, DFA 100, Digital Force Gauge, 500 N 1 Digital Force Gauge ALLURIS, FMI-100-C5, Digital Force Gauge, 500 N 1 Advanced Force Gauge MECMESIN, AFG500N, Advanced Force Gauge, 500N 1 Cupboard Cupboard, 2 doors, 100 x 100 x 100 cm 1 Workbench Workbench, including vise, 120 X 100 X 100 cm 1 Racks Racks, sold without contains, 300 x 60 x 170 cm 1 Resistance Test TRIMOS, VERTICAL 3, serial number 13226/IP:6, Resistance Test, model TVA 600, please inspect, sold without power supply 1 Trolley Trolley, used for car seats 1 Trolley Trolley, used for car seats 1 Trolley Trolley, used for car seats 1 Trolley Trolley, used for car seats 1 Trolley Trolley, used for car seats 1 Trolley Trolley, used for car seats 1 Sloping Top Desk Sloping Top Desk, on wheels, 60 x 40 cm 1 Sloping Top Desk Sloping Top Desk, on wheels, 60 x 40 cm 1 Marble PRECIS MARBRE, QUALITE PN, year built 1995, serial number 5069, Marble, 160 x 100 x 20 cm 1 Gear Motor SOPAP, SA 660, Gear Motor, with motor USOCOM 1410 rpm 1 Bungalow Bungalow, 2 doors, 700 x 300 x 250 cm, sold with contains: lockers, PLEASE INSPECT 1 Bungalow Bungalow, 250 x 400 x 250 cm 500.00 350.00 300.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 100.00 100.00 100.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 100.00 100.00 350.00 200.00 Lot 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 Number Description Starting Bid 7 Lot of Tables Lot of 7 Tables, 200 x 100 x 80 cm 1 Boiler SAPCABLOC, 5009, serial number 84742, Boiler, 6 Bars, TC 310 th/h, with CUENOD C34 Burner 52 Lot of Lockers Lot of 52 Lockers including 50 x double compartment blocks 60 x 50 x 180 cm + 2 x triple compartments blocks 120 x 50 x 180 cm 48 Lot of Lockers Lot of 48 Lockers including 46 x double compartment blocks 60 x 50 x 180 cm + 2 x triple compartments blocks 120 x 50 x 180 cm 30 Lot of Lockers Lot of 30 Lockers including 30 x double compartment blocks 60 x 50 x 180 cm 1 Column Drilling Machine RSS, 352727, serial number 1160, *Column Drilling Machine, 1400 rpm 1 Bench Grinder MAPE, 201 M.M, *Bench Grinder, 3000 rpm 1 Plastic Sink Plastic Sink, waste water reclamation system, 90 x 70 x 120 1 Workshop Pedestal Workshop Pedestal, on wheels, 5 drawers, 50 x 50 x 70 cm 1 Workshop Trolley Workshop Trolley, on wheels, 2 stages, 2 drawers, 100 x 40 x 120 cm 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm, sold with contains: tools, various, 6 x pneumatic guns, 2 pumps 7 Bars, VEUILLEZ INSPECTER 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm, sold with contains: tools, various, PLEASE INSPECT 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm, sold with contains: tools, various, VEUILLEZ INSPECTER 1 Workbench Workbench, 2 x drawers, including vise, 140 X 100 X 100 cm, sold with contains: tools, drills, taps, PLEASE INSPECT 1 Workshop Trolley Workshop Trolley, on wheels, 2 stages 1 Cupboard Cupboard 10 compartments, 50 x 40 x 190 cm 1 Tiroclass Cupboard Tiroclass Cupboard, 18 drawers, sold with contains: fastenings, pneumatics, VEUILLEZ INSPECTER 1 Workbench Workbench, 16 x drawers, including vise, 200 X 100 X 100 cm, sold with contains: fastenings, pneumatics, electricity, plumbing, PLEASE INSPECT 1 Printer ZEBRA, 105SL, serial number 6472747, Printer 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 1 door, sold with contains: 60 x 50 x 160 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: tools, various, LAMBDA LPD 422 A power supply, drills, taps, 120 x 60 x 200 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: electricity, 120 x 60 x 200 cm, PLEASE INSPECT 100.00 450.00 500.00 500.00 300.00 200.00 50.00 100.00 50.00 80.00 150.00 100.00 100.00 100.00 50.00 50.00 100.00 150.00 50.00 50.00 150.00 150.00 Lot 117 118 119 120 121 122 123 124 125 127 128 129 130 131 132 133 134 135 136 137 138 Number Description Starting Bid 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: various, 120 x 60 x 200 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, 5 drawers, sold with contains: various, fastenings, electricity, pneumatics: 100 x 50 x 190 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, 5 drawers, sold with contains: various, pneumatics: 100 x 50 x 190 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, 5 drawers, sold with contains: various, tools, grinder Bosch 2700 rpm: 100 x 50 x 190 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, sold with contains: cables: 160 x 60 x 170 cm, PLEASE INSPECT 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 1 door, 60 x 60 x 200 cm 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, 120 x 60 x 200 cm 1 Metallic Workshop Cupboard Metallic Workshop Cupboard, 2 doors, 120 x 60 x 200 cm, sold with contains: 7 pneumatic screw guns, 1 pneumatic riveting machine, 5 GRONIUS power supplies, various, PLEASE INSPECT 1 Tiroclass Cupboard BOT, COMPACT, Tiroclass Cupboard, 14 drawers, sold with contains: pneumatics, various, 150 x 60 x 120 cm, PLEASE INSPECT 1 Workshop Trolley Workshop Trolley, on wheels, 3 stages, 2 drawers, 100 x 60 x 100 cm 1 Workshop Trolley Workshop Trolley, on wheels, 2 stages, 1 Workshop Trolley Workshop Trolley, on wheels, 2 doors, 100 x 60 x 100 cm 1 Pneumatic Riveting Machine GENESIS, G4HD, *Pneumatic Riveting Machine, 2000mm, on TECHNA pulley 1 Step Ladder ZARGES, Step Ladder, 7 steps 6 Lot of Welding Generators FRONIUS TRANSPULS SYNERGIC, TPS 330, Lot of 6 Welding Generators 15 Lot of Welding Equipment Lot of 15 Welding Equipment including 3 x FRONIUS TRANSPULS SYNERGIC 4000, 1 x FRONIUS 4000 SMTR, 2 x FRONIUS ROBECTA TC 1000, 1 x FRONIUS FK 4000 RFC, 1 x FRONIUS UR 7000 CMT 4R/G/W/F, 1 x FRONIUS TPS 330, 1 x ESAB FEED 302, 2 x ESAB PSF 315 R, 3 x ESAB ARISTOROB 500, 1 x COMMERCY SOUDURE CY 326 N 4 Lot of Welding Generators FRONIUS , TPS 330, Lot of 4 x Welding Generators 10 Lot of Welding Equipment ESAB, Lot of 10 Welding Equipment including 3 x ESAB MEK2 + 1 x ESAB MEK 4C FEED 302 + 2 x ESAB MIG 320 + 4 x ESAB 9 Lot of Welding Equipment ESAB, Lot of 9 Welding Equipment including 1 x ESAB MEK2 + 2 x ESAB MEK 4C + 6 x ESAB 10 Lot of Welding Equipment ESAB, Lot of 10 Welding Equipment including 4 x ESAB MEK2 + 1 x ESAB AD-MED44 + 1 x ESAB LUC 400 + 4 x ESAB 9 Lot of Welding Equipment ESAB, Lot of 9 Welding Equipment including 2 x ESAB MEK2 + 1 x ESAB FEED 302 + 5 x ESAB LA 320 + 1 x ESAB MIG 320 150.00 150.00 150.00 150.00 150.00 50.00 100.00 200.00 200.00 80.00 50.00 50.00 50.00 40.00 300.00 750.00 200.00 500.00 450.00 500.00 450.00 Lot 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 Number Description Starting Bid 16 Lot of Printers 500.00 Lot of 16 Printers including ZEBRA 105 SL = ZEBRA 160 SL + PRINTRONIX T 5000 1 Complete Contains Spare Parts Shop 3,000.00 Complete Spare Parts Shop, including 2 metallic cupboard, 2 doors, 120 c 50 x 200 cm with contains +1 Storage Rack: 8 beams 175 cm, 2 ladders 250 cm + 2 metallic shelfs, 1 trolley + 8 storages shelf racks, double faced, 400 x 80 x 250 cm including contains, spare parts: tools, electricity, fuses, converters, controllers, various, springs, rings, fastenings, washers, joints, swivel, lentheners, bearings, pneumatic guns, bushs, motors, FEST cylinders, pipes, gloves, masks, tapes, plastic jars and much more, + 4 cupboards 2 doors, 120 x 50 x 200 including contains, VEUILLEZ INSPECTER 1 Compressor 500.00 INGERSOLL-RAND, SSR, Compressor, M90 controller, approximately 19 000 hours 1 Compressor 500.00 INGERSOLL-RAND, SSR, Compressor, M90 controller, approximately 16 000 hours 1 Compressor 500.00 INGERSOLL-RAND, SSR, Compressor, M90 controller, approximately 16 400 hours 1 Lot of Air Dryer and Tank and Filters 1,000.00 HIROSS, MDH65A100B001, serial number AD650429, Lot including Air Dryer, Refrigerent 22, 12 Bars, 400V + RONOT 3000L tank, 10 Bars, year 2010 + 2 filters HIROSS HFS 900, 139 L, 450°c max, 10 Bars 1 Exhausting System 200.00 CATINAIR, SBAD-14-2-7, Exhausting System, motor CUIRACEM, 1455 rpm 1 Exhausting System 200.00 VENTMECA, SBAD 1227, Exhausting System, motor ASEA, 1460 rpm 1 Exhausting System 200.00 CATINAIR, SBAS 14 2 15, Exhausting System, motor CEM, 1455 rpm 5 Lot of Exhausting System 1,000.00 Lot of 5 Exhausting System 4 Lot de Roller Cabinets and 500.00 FACOM, Lot de 4 x Roller Cabinets + 2 Worbench on wheels 1 Generator Set 1,000.00 IVECO, 205010131KW 1500UPM, serial number GE83EISRI 25.6 ASS1, Generator Set, 226 hours, 130 Kwa, 350 x 150 cm 1 Oven 100.00 MEMMERT , UM 200, serial number B2950708, Oven, 220°c, 1100W, 230V, internal dimension: 40 x 30 x 40 cm 1 Scale 100.00 METTLER, AG 104, serial number 1114203048, Scale, max 201g, d:0,1mg 1 Water Bath 50.00 BIOBLOCK, SLM-BB, serial number 713803, Water Bath, 1A, 240V 1 PH Meter 50.00 TACUSSEL, LPH330T, PH Meter 1 Conductivity Meter 50.00 METER LAB, CDM 210, Conductivity Meter 1 Osmosis Water System 1,000.00 CULLIGAN, Osmosis Water System, including 2 tanks WAVECYBER 1465 L + 2 injectors DLXVFT + 4 filters: 2 x 1 µl, 2 x 10 µl + 1 x GRUNDFOS CRN3-36 Pump, 3m3/hour, 1200 rpm + 1 x tank 10000 L 1 Painting Robot 500.00 KUKA, KR 125L 90/2, serial number 780813, *Painting Robot, cupboard controller KRC 1 1 Cataphoresis Line 15,000.00 TRANSMETAL ACOMA , year built 1995, Cataphoresis Line including TRANSMETAL ACOMA conveyor system: running on BI RAIL Conveyors. Without: suspended tray conveyors. Capacity: 130 suspended tray conveyors per hour on a surface area of 900M2/hour maxi. Decluchting System. Total time needed including painting and running: 120 min. Total lenth: 1174 meters. Speed: 3,68 to 12,5 meters/min. Maximum weight/suspended tray conveyor: 120 Kgs. System including safety grates in case of fall of Lot 159 160 Number Description Starting Bid work pieces + Pre-Treatment Tunnel, year 1991, reconditioned in 1995 and 2005 (Stainless Steel sheets). Dimensions: 39 x 5,7 x 4,86 meters. Process : 1) Degreasing: 2) Phosphatization: 3) Standard water rinsing: 4) Final rinsing with Osmosis water, PLEASE NOTE THAT OSMOSIS SYSTEM IS NOT AVAILABLE + Cataphoresis Cabin, 45m3. Total lenth 17 meters. Bath T°c (between 28 and 32°c). Painting flow-rate: 1800L/hour + Firing Furnace, dim: 20 x 9 x 4 meters. T°c : 200°c. Cycle: 30 mn (20 mn at regulated T°c). Heating by standard gas burners. Power 12000KW + Extra furnace: SIEMENS COROS OP 35, dim : 14 x 2 x 4,50 meters. PLEASE NOTE that the line is sold complete including all the accessories (pumps, tanks, heat echangers, oil separators, exhausting systems, others...) except OSMOSIS WATER SYSTEM AND GENERATOR SET ARE SOLD SEPARETLY. The suspended tray conveyors are not included. To get more details and informations regarding the description of the cataphoresis line, please download the PDF document available on the sale page or on the linked file. 1 Column Drilling Machine SYDERIC, SV23, serial number 38529, *Column Drilling Machine, 1500 rpm 1 High Pressure Washer KARCHER, HDS 695 Meco, year built 2005, serial number 196654, High Pressure Washer, 400V, 5.8 KW, 96 db 250.00 250.00 General conditions Online Auction TroostwijkAuctions.com 1. Definitions Website: User: Troostwijk: Purchase Sum: Registration: Bid: Lot: Auction: Seller: Purchaser: User’s Agreement: Purchase Agreement: Delivery: General Terms and Conditions for the the User: General Online Auction Terms and Conditions: Specific Online Auction Terms and Conditions: Allocation: the website www.TroostwijkAuctions.com, which is maintained by Troostwijk Veilingen B.V., with its registered seat in Amsterdam; the one who has registered on the Website; Troostwijk Veilingen B.V. and/or its subsidiary/ies or sister company/ies as reported on the Website; the amount of the highest – allocated – bid increased by: - mark-up above the highest bid and - the V.A.T. owed registration of User on the Website by means of filling in completely the registration form found on the Website; each amount bid by User in the auction for a lot; an article, or a number of articles that are auctioned together (under one number); the public sale of moveable goods organized by Troostwijk via the internet; the one who has commissioned a Lot to be auctioned; the User to whom the Lot is allocated; the agreement between Troostwijk and the User; the purchase agreement between the Purchaser and the Seller; the actual delivery of the Lot to the Purchaser or to his authorized representative; the General Terms and Conditions for access to and use of Website; these General Terms and Conditions; the additional, supplementary to or in departure from the General Terms and Conditions for the User and the General Terms and Conditions of the Online Auction, valid terms and conditions, as reported on the Website for the Auction in question; the declaration by Troostwijk that a Lot or combination of Lots has been allocated to the highest bidder upon payment of the Purchase Price. Article 2. Applicability 2.1 The General Online Auction Terms and Conditions are applicable to the relationship between Sellers or Users on the one hand and Troostwijk on the other in the participation in Auctions. 2.2 The applicability of General Terms and Conditions other than the present one, General Terms and Conditions for the User, the Specific Terms and Conditions of the Online Auction, is excluded. Article 3. The Auction 3.1 Troostwijk reserves the right to cancel an Auction, to terminate an Auction earlier than reported on the Website or to extend one. In case of a technical malfunction of the Website, causing it to be not completely accessible and/or inaccessible to Users, Troostwijk has the right to extend the Auction by 24 hours. 3.2 The User states by his Registration that he is familiar with and agrees with the special circumstances of an internet auction and with the technical imperfections that can arise. Troostwijk denies any liability for whatever damage that may arise in any way, directly or indirectly, including but not limited to the damage arising from the use of the Website, unless there has been deliberate or conscious negligence by Troostwijk. More particularly, Troostwijk accepts no liability for any damage whatsoever that arises in any way by or from: - actions performed by the User that may have been inspired by the information placed on the Website; - the impossibility of using the Website (completely) and/or another malfunction in the Website or the supporting system; - the Lots not meeting the specifications as reported on the Website; - the fact that the information on the Website is incorrect, incomplete or out of date; - errors in the software of the Website and/or the supporting system; - the unlawful use of systems, including the Website of Troostwijk, by a third party; - actions by the Seller after the User has concluded a Purchase Agreement with the Seller. www.TroostwijkAuctions.com Article 4. Organization of the Auction 4.1 The organization, preparation and carrying out of the Auction is to be done by Troostwijk. 4.2 Without having to give any reason, Troostwijk has the authority before or during the Auction: - not to recognize a Bid as such; - to exclude one or several Users from the Auction; - to collect objects into Lots, to split Lots or to remove Lots from the auction; - to repair mistakes made by Troostwijk in offers and/or allocations, without the User being able to make use of these errors and/or derive any rights from them; - to take other measures that are, in its judgment, necessary. 4.3 Troostwijk has the authority to set as a condition for participation in certain Auctions and/or bids on certain Lots that a User provide a bank guarantee beforehand to the satisfaction of Troostwijk. 4.4 The judgment of Troostwijk concerning that which has occurred during the Auction is binding. Article 5. Bids; Purchase Agreement 5.1 The User can place a Bid on the Website on one or several Lots. Every bid is unconditional, irrevocable and without reservation. Bids are placed exclusive of mark-up and V.A.T. Troostwijk is authorized to place bids on behalf of third parties. 5.2 If a Lot is also brought to auction together with one or several other Lots as a combination, this will be reported on the individual page of the Lot. In that case, bids can be placed first on the individual Lots of the combination and after the closing of all individual Lots, bids can be placed on the combined Lot. Individual Lots can be allocated only if the total amount of the highest sustainable bids on the individual lots is higher than the highest sustainable bid on the combination. The combination will be allocated solely if the highest sustainable bid on the combination is higher than the total amount of the highest sustainable bids on the individual lots. 5.3 Bids can be placed in the form of a ‘static bid’ or ‘proxy bid.’ In a static bid, the User places a bid in the form of a fixed amount per Lot. In a proxy bid the User indicates the maximum price he is prepared to pay for the Lot. The auction system sees to it that, after outbidding by a third party, the minimally possible higher bid is introduced in the name of the User, as long as the maximum indicated by the User has not been reached. A proxy bid can be eliminated by the User solely by placing a static bid that at that 5.4 The Purchase Agreement arises through Allocation. Allocation is generally given to the User who has made the highest Bid. 5.5 The Purchaser receives confirmation within 48 hours after the Auction has been closed (not including Saturdays, Sundays and holidays) by email on behalf of the Seller(s) that the Purchase Agreement has been made. If the User does not receive any e-mail within the period mentioned above, this means that his Bid has not been accepted. Troostwijk then has the right not to allocate or not to allocate under suspensive condition(s). 5.6 The risk of the Lot(s) is transferred to the Purchaser at the moment of Allocation. 5.7 Troostwijk is not a party to the Purchase Agreement but merely mediates in the creation of purchase agreements. If the auction is a forced sale, this will be reported in the Specific Terms and Conditions of the Online Auction. 5.8 In the event that the auction occurs in the presence of a civil-law notary or court bailiff, he will supervise the Auction and the bids placed there and the Allocations. Article 6. Guarantees, claims and indemnities 6.1 In respect of the Lots and possible claims of third parties to these, Troostwijk and/or the Seller will provide no single guarantee of whatever kind. The Purchaser waives all rights except those that are his by mandatory law. 6.2 The Lots are sold for what they are worth in the state in which they are found on the date of Allocation with all benefits and burdens attached there to Troostwijk and/or the Seller do not give any indemnity of any kind for visible or hidden defects or any kind of guarantee in connection with completeness, numbers, functioning, usability, saleability, the existence or non-existence of rights of third parties and/or the possibility of transfer to third parties. Defects of whatever kind, disappointed expectations of the Purchaser and/or the receiving third parties do not bestow any rights at all to damages and/or discount. The Purchaser is assumed to have carefully investigated the Lot bought by him beforehand. 6.3 If, in respect of the lots, claims by third parties are made on the basis of the retention of ownership, the Purchaser is obligated to hold the lot(s) in question for those third parties, under the obligation to transfer it to the third parties at the first request or to come to a suitable arrangement with the third parties. 6.4 The Purchaser indemnifies Troostwijk and/or the Seller against every claim by a third party in connection with the Purchase Agreement. Article 7. The Purchaser’s payment obligations 7.1 The Purchaser has the obligation to transfer the Purchase Price to an account number to be indicated by Troostwijk within three days (not including Saturdays, Sundays and holidays) after confirmation of the Purchase Agreement. Payment should be made in Euros or in another currency to be indicated by Troostwijk. www.TroostwijkAuctions.com 7.2 In the event of a late payment of the Purchase Price, 15% of the Purchase Price, being a forfeit amount for collection costs and/or extrajudicial costs will be charged to the Purchaser by Troostwijk, increased by the statutory commercial interest on the outstanding amount, in-creased by 3% on an annual basis, starting on the day on which the payment should have occurred until the day of effective payment. 7.3 Payments are intended first to decrease the costs, then the interest charges, then finally the Purchase Price. Article 8. Viewing days, auction days, delivery days 8.1 Whoever enters the buildings and grounds on viewing days or on the day of delivery does so entirely at his own risk. The instructions of Troostwijk and/or persons called in by Troostwijk are to be followed. Troostwijk and the Seller do not accept any liability for damages arising from entering the buildings or grounds. Article 9. Delivery 9.1 If and as soon as the Purchaser has met all his payment obligations, the Purchaser can pick up the Lot(s) in question during the hours and at the place specified by Troostwijk, after having showing a proper identification. This is the Delivery. The Buyer is obligated to pick up the lot(s) no later than the date specified in the Specific Terms and Conditions of the Online Auction. Troostwijk can stipulate that (a) certain Lot(s) can be picked up only after Lots have been delivered. 9.2 After delivery the Purchase Agreement can no longer be terminated or destroyed by the Purchaser. 9.3 If it appears that a Lot cannot be delivered because of claims by third parties or because of the fact that the delivery would cause unacceptable damage to the buildings or premises where the Lot is situated or for other reasons appears to be strongly objectionable, Troostwijk is authorized to terminate the Purchase Agreement. This termination occurs by e-mail and/or registered letter to the Purchaser at the address supplied by the Purchaser, after which Troostwijk and/or the Purchaser is/are no longer held to restitution of the amounts already paid by the Purchaser to Troostwijk for the purchase of the Lot(s). 9.4 The Purchaser whose Lot(s) hinder the picking up of other Lots is obligated to see to it immediately after reception of an e-mail or other written documents from Troostwijk that the Lot(s) are picked up. The arranging of possible storage by third parties is at the Purchaser’s own charge and risk. 9.5 The Purchaser is obligated to dismantle or demolish his Lot(s) and to pick them up. He is completely liable for damage done to the property of others in connection therewith. He is further obligated to indemnify Troostwijk and the Seller against all claims by third parties arising from the dismantling, demolishing and/or the picking up of the Lot(s). 9.6 During the dismantling, demolishing and picking of the Lot(s), the Purchaser is obligated to follow the instructions of Troostwijk and/or persons called in by Troostwijk. 9.7 The Purchaser is obligated to see to it that he or whoever takes care on his behalf of the dismantling, demolishing or transport has the proper required permits. Troostwijk and/or the Seller cannot be held accountable for the lack of the necessary documents and/or the infringement of governmental regulations in the dismantling, demolishing and/or transport by or on behalf of the Purchaser. 9.8 In situations in which it is/appears necessary to dismantle buildings for (an) allocated Lot(s), this can occur only through prior consultation with and written authorization from Troostwijk and under these terms and conditions set in the granting of permission. 9.9 If Troostwijk stipulates such, a deposit will be made in connection with possible damage to the buildings. If such damage occurs, the deposit will be applied to the payment for repair of the damage, subject to the obligation of the Purchaser to pay compensation for more damage. If no damage results, the deposit will be restored to the Purchaser. Article 10. Restrictions concerning the sale of certain lots. 10.1 Machines and production components are generally sold in conformity with technical specifications as well as with French legal safety norms or regulations. This conformity is attested to either by a seal of conformity (for a machine put into service after 15 January 1981 – (French) Decrees 80-543 and 544) or a CE seal (machines put into service after 15 January 1993 – (French) decrees 93-40) if they have not undergone significant modifications to the safety mechanisms. 10.2 When the item for sale does not conform to technical specifications, or to French legal safety norms or regulations, it is reminded to buyers that this item must be imperatively refurbished in regards to the above norms and/or regulations during its installation and/or use after its auction. Buyers commit to refurbish the item in conformity with their enforceable norms and/or regulations. Items are sold as spare parts. 10.3 Machines which are non-compliant and not dangerous are sold as unfit for production. They may be sold in the condition as seen: 1 – to an individual or legal entity where the material is not destined for use on French territory. It shall be the buyer’s responsibility to conform to the legislation of the country where the material is to be used. 2 – to an individual or legal entity having the status of retailer, salvage dealer, re-manufacturer, scrap merchant, scrap metal dealer or collector who commits beforehand to be responsible for and to ensure conformity to required standards, for possible assignment to a clientoperator. 3 – to any buyer as a source of spare parts and who testifies, by accepting the general and particular conditions, not to use or assign the material for production. 10.4 Machines which are considered dangerous ((French) Decrees dated 5 March and 24 June 1993) and non-compliant may only be sold under www.TroostwijkAuctions.com categories 1 and 2 of the preceding article. 10.5 Buyers formally commit to respect the above criteria by accepting the general and particular conditions of sale. 10.6 The measures contained in articles 10.1 to 10.4 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. Article 11. Termination 11.1 If the Purchaser does not fulfill any obligation in the Purchase Agreement, including (but not limited to): (i) not paying the Purchase Price or not paying it completely on time; (ii) not picking up the Lot(s) on time and/or (iii) not providing the information required before delivery, the Purchaser is legally in default without further notice of default being required, and Troostwijk can terminate the Purchase Agreement on behalf of the Seller. In that case Troostwijk is free to allocate the Lot(s) to another party without Troostwijk and/or the Seller being liable for any damages. 11.2 In case of termination as intended in 11.1, the Purchaser in default must pay, in addition to the mark-up, a forfeit amount of 25 % of the Purchase Price to cover administrative, storage, insurance and transport costs, etc., subject to the right of Troostwijk and/or the Seller to demand complete compensation for damages. Article 12. Liability 12.1 The liability of Troostwijk, if and insofar as the other remaining stipulations of the General Terms and Conditions of the Online Auction, the Terms and Conditions for the User and (if applicable) the Specific Terms and Conditions of the Online Auction are applied, will still be limited to the amount to which the liability insurance of Troostwijk accords Troostwijk in the instance in question, increased by the amount of excess according to the policy in question, or, if it is less, to the invoiced amount that is involved with the commission. This limitation does not apply in the event of deliberate or gross negligence by Troostwijk. 12.2 Troostwijk is not liable for indirect or consequential loss. Further, all liability of Troostwijk in connection with any defect in the Lot(s) or in respect of (alleged) infringement of the rights of (the intellectual property of) third parties is excluded. The Purchaser declares that he is familiar with the fact that, in respect of Lot(s), possible rights (of intellectual property) rest with third parties. 12.3 In consulting with third parties, Troostwijk will take the necessary caution into consideration. Troostwijk is also not liable for possible shortcomings of these third parties. Article 13. Adjustments; Effect 13.1 If and insofar as any stipulation of the General Terms and Conditions of the Online Auction is null and void or is nullified, the remaining stipulations will remain undiminished in force. Troostwijk will then determine a new stipulation to replace the null/nullified stipulation, by which the intent of the null/nullified stipulation will be taken into consideration. 13.2 Troostwijk can, in addition to these General Online Auction Terms and Conditions, declare the Specific Online Auction Conditions to be applicable. Notification of the Specific Online Auction Terms and Conditions will be made before the Auction. If and insofar as the Specific Online Auction Terms and Conditions are in contradiction with the General Terms and Conditions of the Online Auction, the Specific Online Auction Terms and Conditions will have preference. 13.3 Departure from these General Terms and Conditions of the Online Auction is permitted only if is fixed in writing by an authorized representative of Troostwijk. 13.4 Troostwijk reserves the right to amend these General Terms and Conditions of the Online Auction. Amendments will take effect 24 hours after these have been sent by e-mail to the User. These terms and conditions replace all previous general terms and conditions, unless explicitly stated otherwise by Troostwijk. Article 14. Applicable law 14.1 Dutch law is applicable to these General Terms and Conditions of the Online Auction and the legal relationships that are associated with the Auction. 14.2 The Dutch text of the General Terms and Conditions of the Online Auction is the original text. In the event that the General Terms and Conditions of the Online Auction are used in several languages; the Dutch text will therefore be given preference in case of lack of clarity or contradictions. 14.3 The District Court Amsterdam is authorized (subject to the possibility of appeal and to laws that state otherwise) to decide in differences arising from these terms and conditions, to the exclusion of every other instance. www.TroostwijkAuctions.com About Troostwijk Did you know? - we organise auctions in 23 countries - we have 1,5 million page views on a top day 700 Auctions Statistics Troostwijk conducts annually 700 auction sales all over Europe - in 2010 already 37.665 bidders - from 89 different countries - over 250.000 registrations 15 Countries 80 Years Troostwijk has own offices in 15 European countries Troostwijk is conducting auctions since 1930 and has 80 years of experience www.TroostwijkAuctions.com