Sun StorEdge Enterprise Backup Software 7.2 Update Guide

Sun StorEdge™ Enterprise
Backup Software 7.2
Update Guide
Sun Microsystems, Inc.
www.sun.com
Part No. 819-4089-10
September 2005, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback
Copyright 2005 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved.
Sun Microsystems, Inc. has intellectual property rights relating to technology that is described in this document. In particular, and without
limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or
more additional patents or pending patent applications in the U.S. and in other countries.
This document and the product to which it pertains are distributed under licenses restricting their use, copying, distribution, and
decompilation. No part of the product or of this document may be reproduced in any form by any means without prior written authorization of
Sun and its licensors, if any.
Third-party software, including font technology, is copyrighted and licensed from Sun suppliers.
Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in
the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.
Sun, Sun Microsystems, the Sun logo, Java, AnswerBook2, docs.sun.com, Sun StorEdge, and Solaris are trademarks or registered trademarks of
Sun Microsystems, Inc. in the U.S. and in other countries.
All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and in other
countries. Products bearing SPARC trademarks are based upon an architecture developed by Sun Microsystems, Inc.
The OPEN LOOK and Sun™ Graphical User Interface was developed by Sun Microsystems, Inc. for its users and licensees. Sun acknowledges
the pioneering efforts of Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry. Sun
holds a non-exclusive license from Xerox to the Xerox Graphical User Interface, which license also covers Sun’s licensees who implement OPEN
LOOK GUIs and otherwise comply with Sun’s written license agreements.
U.S. Government Rights—Commercial use. Government users are subject to the Sun Microsystems, Inc. standard license agreement and
applicable provisions of the FAR and its supplements.
DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright 2005 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés.
Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la
limitation, ces droits de propriété intellectuels peuvent inclure un ou plus des brevets américains énumérés à http://www.sun.com/patents et
un ou les brevets plus supplémentaires ou les applications de brevet en attente dans les Etats-Unis et dans les autres pays.
Ce produit ou document est protégé par un copyright et distribué avec des licences qui en restreignent l’utilisation, la copie, la distribution, et la
décompilation. Aucune partie de ce produit ou document ne peut être reproduite sous aucune forme, par quelque moyen que ce soit, sans
l’autorisation préalable et écrite de Sun et de ses bailleurs de licence, s’il y en a.
Le logiciel détenu par des tiers, et qui comprend la technologie relative aux polices de caractères, est protégé par un copyright et licencié par des
fournisseurs de Sun.
Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque
déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.
Sun, Sun Microsystems, le logo Sun, Java, AnswerBook2, docs.sun.com, Sun StorEdge, et Solaris sont des marques de fabrique ou des marques
déposées de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays.
Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun
Microsystems, Inc.
L’interface d’utilisation graphique OPEN LOOK et Sun™ a été développée par Sun Microsystems, Inc. pour ses utilisateurs et licenciés. Sun
reconnaît les efforts de pionniers de Xerox pour la recherche et le développement du concept des interfaces d’utilisation visuelle ou graphique
pour l’industrie de l’informatique. Sun détient une license non exclusive de Xerox sur l’interface d’utilisation graphique Xerox, cette licence
couvrant également les licenciées de Sun qui mettent en place l’interface d ’utilisation graphique OPEN LOOK et qui en outre se conforment
aux licences écrites de Sun.
LA DOCUMENTATION EST FOURNIE "EN L’ÉTAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES
OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A
L’ABSENCE DE CONTREFAÇON.
Please
Recycle
Sun StorEdge Enterprise Backup
Software 7.2 Update Guide
This update kit allows you to update from Solstice Backup 5.x to Sun StorEdgeTM
Enterprise Backup Software 7.2.
Note – This update provides the same features enabled in the current Solstice
Backup / Sun StorEdge Enterprise Backup Software release you have. It does not
enable additional new features, nor does it update or add additional optional
modules, for example, the Application Module for Oracle.
To enable additional new features, update, or enable new optional modules, you
must purchase new enabler codes.
This document contains the following sections:
■
“Migration Path” on page 2
■
“Installation” on page 3
■
“Additional Information” on page 4
1
Migration Path
The Solstice Backup 5.1 and 5.1.1 releases have different server software product
families than the ones available in Solstice Backup 5.5 and later software releases.
Refer to Appendix TABLE 1 for the proper migration path.
TABLE 1
Migration Path Matrix
Solstice Backup /
Sun StorEdge EBS
Release
From Server Software
Product
To 7.2 Server Software
Product
Need Update for
Sun StorEdge EBS
7 Enabler Code?
5.1, 5.1.1
Server Edition
N/A1
N/A1
Network Edition
Network Edition
Yes
Power Edition
Power Edition
Yes
Workgroup Edition
Workgroup Edition
Yes
Network Edition
Network Edition
Yes
Power Edition
Power Edition
Yes
Workgroup Edition
Workgroup Edition
Yes
Business Edition
Business Edition
Yes
Network Edition
Network Edition
Yes
Power Edition
Power Edition
Yes
Workgroup Edition
Workgroup Edition
No
Business Edition
Business Edition
No
Network Edition
Network Edition
No
Power Edition
Power Edition
No
5.5/5.5.1
6.0, 6.1
7.0 / 7.1
2
1 Solstice Backup 5.1/5.1.1 Server Edition is no longer a supported server edition after the Solstice Backup 5.5
release. Customers with this server edition should purchase the Workgroup Edition server license for
transitioning to Sun StorEdge Enterprise Backup Software 7.2 release.
2 Solstice Backup 6.1 Business Edition was available only when patch 111962-xx was installed on top of the base
packages.
2
Sun StorEdge Enterprise Backup Software 7.2 Update Guide • September 2005
Installation
For more information on the installation procedure, refer to
http://www.sun.com/products-nsolutions/hardware/docs/Software/Storage_Software/EBS/index.html for the
following documentation.
Title
Part Number
Sun StorEdge Enterprise Backup Software 7.2 Installation Guide
819-0287-10
chapter 3
You can find the document on the Sun StorEdge EBS 7.2 CD-ROM and in the Sun
StorEdge EBS 7.2 documentation kit.
Solaris 10 Support
Sun StorEdge Enterprise Backup Software 7.2 does not support Solaris 10. To get
Solaris 10 support, you must install one of the applicable Sun StorEdge EBS 7.2 latest
Service Update patch below:
■
116831-xx for 32-bit SPARC base package
■
116832-xx for 64-bit SPARC base package
■
116833-xx for 32-bit x86 client base package
■
116834-xx for 32-bit SPARC L10N base package
The patches can be downloaded from:
http://sunsolve.sun.com
For installation instructions, refer to the README file of the above patches, and the
NetWorker 7.2.1 documents posted on EMC/Legato web site at:
http://www.legato.com/support/
Sun StorEdge Enterprise Backup Software 7.2 Update Guide
3
Additional Information
■
When you update from Solstice Backup release 5.x to Sun StorEdge EBS 7.2, the
client file indexes and media database must be converted to a new format. For
details on the conversion procedure, see the Sun StorEdge Enterprise Backup
Software 7.2 Installation Guide, 819-0287-10.
Caution – This is a one-way conversion. After the client file indexes and the media
database have been updated to Sun StorEdge EBS release 7.2, these objects cannot be
reverted for use by a previous release of the Sun StorEdge Enterprise Backup
Software.
■
A new resource database replaces nsr.res and nsrjb.res files. In Sun
StorEdge Enterprise Backup Software releases earlier than 7.x, all resource
information was stored in *.res files. To provide better performance and
improved scalability, Sun StorEdge EBS 7.x replaces the following files with a new
Sun StorEdge Enterprise Backup Software resource database:
/nsr/res/nsr.res
/nsr/res/nsrjb.res
The configuration information these files contained now resides in the following
directory structure:
/nsr/res/nsrdb/00
.
.
.
/nsr/res/nsrdb/09
Within this directory structure, each resource is stored in a separate numbered
file. As new resources are created (for example, Client, Group, or Pool resources),
new files are added in these directories.
Because client resources are generally very small, the Sun StorEdge EBS client
(nsrexecd) continues to use the /nsr/res/nsrla.res file.
■
4
If you update from Solstice Backup 5.5 (also known as release 5.5.1) to Sun
StorEdge EBS 7.x, and you have Enterprise Application Module (EAM) 2.x for
Oracle to back up Oracle clients, you can no longer backup Oracle 8x clients. This
is because Solstice Backup 5.5 software release offered EAM 2.x both for Oracle
7.x and for Oracle 8x support. Solstice Backup 6.0 and later releases provide two
modules for Oracle support:
Sun StorEdge Enterprise Backup Software 7.2 Update Guide • September 2005
■
Enterprise Application Module 2.x for Oracle 7.x
■
Enterprise Application Module 3.x for Oracle 8x and later
You must choose one of the options below if you want to continue backing up
Oracle 8x clients after the update:
■
■
■
Keep the Enterprise Application Module 2.x for Oracle 7.x (LSBIS-XXX-2151),
and purchase the Enterprise Application Module 3.x for Oracle 8x and later
(EBSIS-999-2154).
Give up Enterprise Application Module 2.x for Oracle (LSBIS-XXX-2151) in
exchange for Enterprise Application Module 3.x for Oracle 8x and later (EBSIS999-2154) at no charge.
Prior to the Sun StorEdge EBS 7.2 software release, there was no distinction
between licenses for Enterprise Application Module (EAM) for Oracle, UNIX
client and Enterprise Application Module (EAM) for Oracle, Windows/NT client.
They were all of license type Z35. With the Sun StorEdge EBS 7.2 software release,
the license type of EAM for Oracle, UNIX client was changed to D35. If you have
EAM for Oracle, UNIX client in your existing configuration, and you are updating
to the Sun StorEdge EBS 7.1 software or later release, the Z35 license type will be
displayed as unknown license type after the update, however, the functionality
will still be enabled as is.
To identify whether you have the correct enabler code for the appropriate EAM
for Oracle, UNIX client, you should use the nsrcap command line utility in
verbose mode.
■
With versions of Solstice Backup earlier than 6.0, you could use the Client
Connection license to back up clients that belonged to a cluster. Solstice Backup
6.0 introduced a new license for backing up clustered clients. With Solstice
Backup 6.0 and later, the software determines whether the client belongs to a
cluster. If the client belongs to a cluster, the software checks for the new Cluster
Client Connections license. The absence of the Cluster Client Connections license
results in the following error message:
UNIX CLUSTER CLIENT license: Too many clients
To back up clustered clients using Solstice Backup 6.0 or later, you must purchase
the Cluster Client Connections license.
Note – The Sun StorEdge Enterprise Backup Software Power Edition license is built
in with a Cluster Client Connections license that allows backing up of two clustered
clients of same platform type as the backup server.
Sun StorEdge Enterprise Backup Software 7.2 Update Guide
5
■
With versions of Solstice Backup earlier than 6.0, Linux client support was
included with the ClientPak for UNIX license. As of the Solstice Backup 6.0
software release, the ClientPak for UNIX license no longer includes the Linux
client support. A separate ClientPak for Linux license is required for backing up
Linux clients on a backup server of a different platform.
■
With versions of Sun StorEdge EBS earlier than 7.0, you could back up to a File
Type device with a base server edition license. As of the Sun StorEdge EBS 7.0
software release, there is a new Advanced File Type device, as well as a new
DiskBackup Option license. You must have the DiskBackup Option license to
perform backups to disk, both for the new Advanced File Type device and for the
existing File Type device.
If you are updating from a release prior to Sun StorEdge EBS 7.0, and are backing
up to disk, you can receive “grandfather” licenses on a per disk array basis with a
maximum of two licenses.
■
With the Sun StorEdge EBS 7.0 release, the licensing structure has moved to a new
tier-pricing model for Enterprise Application Modules for Windows Client, and
for Network Data Management Protocol (NDMP) Client Connections.
For Enterprise Application Modules for Windows Client licenses, the tiering is
based on the number of processors of the application server, as follows:
Tier
Tier
Tier
Tier
1
2
3
4
=
=
=
=
Single processor
Dual processor
Four processors
Eight or more processors
For NDMP Client Connection licenses, the tiering is based on the model and type
of Network Attached Storage (NAS) server, as follows:
Tier 1: NetApp F85/F87/F720; Auspex NS2000; Mirapoint M300/M400,
Mirapoint M2500 (94GB or 256GNB); and Procom 800 Series.
Tier 2: NetApp F740/F760/F810/F820/F825; Auspex NSc3000; Mirapoint
M2500 (418GB or 580GB), Mirapoint M4000 (192GB or 390GB); Procom 1000
Series; and Sun StorEdge 5210.
Tier 3: NetApp F840/F860/F880/FAS940; EMC IP4700; Auspex
NS3010/NS3010XR; Mirapoint M4000 (840GB); Procom 3000 Series; and Sun
StorEdge 5310.
Tier 4: NetApp FAS960/R100; EMC Celerra; and Auspex NS3020XA.
■
With the Sun StorEdge EBS 7.0 software release, the following licensing policies
are now enforced:
One NDMP Client Connection license is required per NDMP data server.
One Dynamic Drive Sharing (DDS) license is required per shared tape drive.
One Enterprise Application Module license is required per physical host on
which the application is running.
6
Sun StorEdge Enterprise Backup Software 7.2 Update Guide • September 2005
■
As of the Sun StorEdge EBS 7.0 software release, the SAN Storage Node (SSN)
license has been renamed Dedicated Storage Node (DSN) license to reflect its true
functionality; only local backup data streams are supported. You must use a
traditional Storage Node license to accept backup data streams from remote Sun
StorEdge EBS client hosts.
■
If you have existing licenses that need to be grandfathered, please contact your
local sales representative, who will help you gather the required information and
send the request for the new license.
To continue the existing feature support while you obtain a permanent license,
use the 45-day Evaluation Enabler Code available in Sun StorEdge Enterprise
Backup Software 7.2 Roadmap, 819-0289-10. You can find the hardcopy document in
the Sun StorEdge EBS 7.2 Update Kit.
Sun StorEdge Enterprise Backup Software 7.2 Update Guide
7
8
Sun StorEdge Enterprise Backup Software 7.2 Update Guide • September 2005