GUILLOTINE DAMPER RG 350
Transcription
GUILLOTINE DAMPER RG 350
CCMG Hot gases dampers and valves Regulation and isolation Designer and constructor GUILLOTINE DAMPER RG 350 Application areas RG 350 is a guillotine damper designed for operations in hot gas and smoke ducts. Its thickness between flanges is reduced to the minimum possible. Its tightness is excellent. • The basic model is designed for 350 °C • Can resist up to 550 °C with some adaptations. Construction • Fabricated body based on U folded sheet forming two connecting flanges • One deflector • One blade • Guiding of the blade between the deflector and some supports • One actuator support • Inside / outside tightness by stuffing box • Standard painting : one layer of primer ; other systems on demand • Optional protection guards REV 00 Materials (examples) According to application and temperature : • Body : Carbon steel • Actuator support : Carbon steel • Blade : Stainless steel Upstream / downstream tightness Sliding of the blade : • On the deflector (metal / metal) • On a ceramic fibre tress fitted in the deflector Leakage rate calculation on demand Actuation • Electrical by screw and nut system • Pneumatic or hydraulic by linear cylinder • Manual by steering wheel acting on a screw and nut system • Shut off function • Limit switches CCMG SA ZI de la Porte Rouge BP 17 F 27150 ETREPAGNY Tél. 02 32 55 25 02 Fax 02 32 27 10 22 CCMG Hot gases dampers and valves Regulation and isolation Designer and constructor GUILLOTINE DAMPER RG 350 Section Thickness External section REV 00 Overall Drilling pattern Guillotine dampers exist within a large variety of sizes and are generally built to the customer’s dimensions. When possible, the space constraints are taken into account. Only the general arrangement drawing of the order is contractual CCMG SA ZI de la Porte Rouge BP 17 F 27150 ETREPAGNY Tél. 02 32 55 25 02 Fax 02 32 27 10 22