Datenblatt
Transcription
Datenblatt
3000-U150-01 Electronic Locking & Monitoring Verschluss-Systembaustein mit Reedkontakt Der Verschluss-Systembaustein 3000-U150-01 ist Bestandteil des ELM Systems. Er wird in aufspringende Griffsysteme eingebaut und kann über ein ELM Griffmodul Typ 3000-U32-xx oder ein beliebiges anderes DC Steuersignal im Bereich von 9… 32 VDC aktiviert werden. Das Steuersignal muss für mindestens 5 Sekunden anstehen, um eine korrekte Funktion des Bausteins zu gewährleisten. Ein eingebauter Reed-Kontakt signalisiert den Zustand des Griffes (offen/geschlossen). Technische Änderungen vorbehalten. Locking System Unit with Reed Contact Switch The locking system unit 3000-U150-01 is part of the ELM system. It is installed in spring-loaded handle systems and can be driven by an ELM handle module type 3000-U32-xx or any other 9 … 32 VDC control signal. The integrated reed contact reports the current operation status of the handle (open/closed) to the connected device for further processing. Subject to technical changes. RJ11 connector front side view Pin number of connector Signal Colour 2 contact black 3 (-) red 4 (+) green 5 contact yellow Fig. 2: Pin assignment RJ11 connector RJ11 connector RJ11 coupler Fig. 1: 3000-U150-xx Fig. 3: Adaptor cable 3000-U15 or 2457 Yellow Status contact Green (+) 9 ... 32 VDC Brown (--) Ground White Status contact Adaptor cable 3000-U15-00 or 2457 Characteristics Power supply:……......................................................... 8…32 V DC, 100 mA Contact rating: ……....................................................... max. 30 V DC, max. 100 mA, min. 1 mA Cable length: ................................................................. 4 m with RJ11 connector Connecting adaptor cable 3000-U15 to Phoenix plug suitable for ELM handle module 3000-U32-02: 1 contact 2 (-) 3 (+) 4 contact © EMKA Electronic, all rights reserved Rev. 2014-02-24 / Roh-Art.-Nr. 2507 Page 1 of 1