HPSD 6000 Barometric Pressure Transducer
Transcription
HPSD 6000 Barometric Pressure Transducer
DS D6000/B July, 2010 Preliminary Datasheet HPSD 6000 Barometric Pressure Transducer General description Features HPSD 6000 is a barometric pressure transducer. Signal conditioning consist of complete temperature compensation and adjusted amplifier in single, programmable ASIC. High performance and accuracy enables use of this transducer in many applications. Programmable temperature compensation provides 1% total error over -10 to 85°C temperature range. Transducer packed in compact package has been designed for a typical supply voltage of 5 V and an operating temperature range –40 to +125°C, covering commercial, industrial and automotive applications. • • • • • • The model HPSD 6000 is designed for THT mount assembly for pressure range 1 bar absolute. • • 1/4 Single 5 V supply voltage Easy to use package Standard 0.5 to 4.5 V voltage output Digital I2C output available Wide compensated range (-10 to 85°C) Total accuracy 1% over (-10 to 85°C), all effects included (maximum) High performance OEM applications Absolute pressure configuration Applications • • • • Altimeters Medical instrumentation Air pressure sensing Process control This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Hyb d.o.o. assumes no obligation regarding future manufacture unless otherwise agreed to in writing. Copyright © Hyb d.o.o., 2010. All rights researved. Bei Rückfragen wenden Sie sich bitte an: For requests please contact : HJK Sensoren + Systeme GmbH & Co. KG Telefon Telefax eMail Internet +49 (0)821-26 99 00 +49 (0)821-26 99 011 [email protected] http://www.hjk.de DS D6000/B July, 2010 Preliminary Datasheet HPSD 6000 Barometric Pressure Transducer 2/4 Types overview Pressure range ID group VOUT Temp. ranges 1) Over pressure 2) Burst pressure Pressure range 650 to 1150 mbar 750 to 1100 mbar 800 to 1200 mbar 700 to 1300 mbar HPSD 6000-650M HPSD 6000-750M 0.5 to 4.5 V 0.5 to 4.5 V Operating: -40 to 125°C Compensated: -10 to 85°C Storage: -40 to 125°C 3 bar 3 bar 5 bar bar mbar 650 to 1150 mbar 750 to51100 HPSD 6000-800M 0.5 to 4.5 V HPSD 6000-700M 0.5 to 4.5 V 3 bar bar mbar 800 to51200 3 bar bar mbar 700 to51300 ID group HPSD 6000-650M HPSD 6000-750M HPSD 6000-800M Parameter Symbol Min. VOUT 0.5 to 4.5 V 0.5 to 4.5 V 0.5 toType 4.5 V Power supply Operating: -40 to 125°C Supply VCC 4.75 Temp. voltage ranges characteristics Compensated: -10 to 85°C Performance Current consumption Storage: -40 to 125°C ICC 4 3) 1) Analog output (pressure) Over pressure 3 bar 3 bar 3 bar TAMB = 25°C 4) 2) Offset Burst voltage pressure 5 bar 5 Obar 5 bar V 0.45 0.50 5) VFull = 5 V, unless otherwise noted CC scale output (FSO) 6 VFS 4.45 4.50 Full scale span (FSS) VFSO 3.95 4.00 Parameter Symbol Min. Type 8) Accuracy (pressure) @ 25°C Ea Power supply 9) Total accuracy (pressure) @ -10 to 85°C Eta Supply voltage 10) VCC 4.75 Repeatability Er ±0.05 Current consumption ICC 4 11) Nonlinearity & pressure hysteresis (BFSL) El ±0.1 3) Analog output (pressure) Load resistance4) RL 2 Offset voltage VO 0.45 See spec. 0.50note 11) Media compatibility 5) Full scale output (FSO) 6 Weight WFS 9 V 4.45 4.50 Full scale span (FSS) VFSO 3.95 4.00 8) Accuracy (pressure) @ 25°C Ea 9) Total accuracy (pressure) @ -10 to 85°C Eta 10) Transducer type Pressure range Pressure Repeatability Er ±0.05 type 11) Nonlinearity & pressure ±0.1 HPSD 6000 hysteresis (BFSL) 650M El A Load resistance R 2 L 750M 11) Media compatibility See spec. note 800M Weight W 9 700M Transducer type Pressure range HPSD 6000 Pressure range 650M 650M 650 to 1150 mbar 750M HPSD 6000-700M Max.0.5 to 4.5 Unit V 5.25 6.5 0.55 4.55 4.05 Max. ±0.8 ±1 5.25 6.5 ±0.3 ∞ 0.55 4.55 4.05 ±0.8 ±1 ±0.3 ∞ V mA 3 bar 5 bar V V V Unit %FSO %FSO V % FSO mA % FSO k V gV V %FSO %FSO % FSO % FSO k g Pressure type Pressure type A A Absolute 800M 750M applies to 750 to 1100 This information a product under mbar development. Its characteristics and specifications are subject to change without notice. Hyb d.o.o. 700M assumes no obligation regarding future manufacture unless otherwise agreed to in writing. Copyright © Hyb d.o.o., 2010. All rights researved. 800M 800 to 1200 mbar 700M 700 to 1300 mbar Bei Rückfragen wenden Sie sich bitte an: For requests please contact : Pressure HJK type Sensoren + Systeme GmbH & Co. KG Pressure range A 650M 650 to 1150 mbar 750M 750 to 1100 mbar 800M 800 to 1200 mbar Telefon Absolute Telefax eMail Internet +49 (0)821-26 99 00 +49 (0)821-26 99 011 [email protected] http://www.hjk.de DS D6000/B July, 2010 Preliminary Datasheet HPSD 6000 Barometric Pressure Transducer 3/4 Specification notes 1) 2) 3) 4) 5) 6) 7) Over pressure is the maximum pressure which may be applied without causing damage to the sensing element. Burst pressure is the maximum pressure which may be applied without causing leakage damage to the sensing element. Analog output signal is ratiometric to power supply Vcc, digital signal is not ratiometric to the power supply. Offset voltage is the voltage output at zero pressure. Full scale output is the voltage output at full pressure range. Full scale span is the algebraic difference between the output at full scale pressure range and offset. Accuracy includes all effects (offset, span, nonlinearity, pressure hysteresis and repeatability) at room temperature and represents maximum deviation of transducer signal from ideal characteristic. 8) Total accuracy includes all effects (offset, span, nonlinearity, pressure hysteresis and repeatability) included with all temperature effects of offset and span. It describes overall error and represents maximum deviation of transducer signal from ideal characteristic in compensated temperature range from 0 to 70°C. 9) Repeatability is defined as typical deviation of the output signal after 10 pressure cycles. 10) Nonlinearity is defined as the BFSL (best fit straight line) across entire pressure range. 11) Media compatibility: clean, dry and noncorrosive gases to silicon, RTV, ceramics Al2O3, epoxy, polymer. Outline dimensions and pinout This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Hyb d.o.o. assumes no obligation regarding future manufacture unless otherwise agreed to in writing. Copyright © Hyb d.o.o., 2010. All rights researved. Bei Rückfragen wenden Sie sich bitte an: For requests please contact : HJK Sensoren + Systeme GmbH & Co. KG Telefon Telefax eMail Internet +49 (0)821-26 99 00 +49 (0)821-26 99 011 [email protected] http://www.hjk.de Parameter Power supply Parameter Supply voltage Power supply Current consumption Supply voltage Analog output (pressure) Current consumption 4) 3) Offset voltage Analog output (pressure) 5) 4) Full scale output (FSO) Offset voltage 6 scale span (FSS)5) FullFull scale output (FSO) 3) Symbol Parameter Power supply Symbol VCC Supply voltage Current consumption V ICC CC 3) Analog output (pressure) ICC 4) Offset voltage 5) VO Full scale output (FSO) 6 V Full scale span (FSS) O VFS Min. Type Symbol Min. 4.75 Type VCC 4ICC 4.75 4 0.45 VO 0.50 Max. Min. Max. 5.25 4.75 5.256.5 6.5 0.45 0.55 Unit Type Max. V mA 4 V mA 0.50 V 5.25 6.5 Unit VFS 4.45 V 0.454.45 0.504.50 0.554.55 V 4.50 DS D6000/B V 3.95 4.00 FSO V 3.95 4.00 4.05 V VFS FSO 8) 4.45 4.50 4.55 V Full scale span (FSS) 8) 25°C Ea Accuracy (pressure) @ 25°C Accuracy (pressure) @ Ea ±0.8 %FSO V 3.95 4.00 4.05 V 9) FSO 9) (pressure) @ -10 to 85°C Totaltoaccuracy Eta Preliminary Datasheet July, 2010 8)@ -10 Total accuracy (pressure) 85°C Et ±1 %FSO a Accuracy (pressure) @ 25°C Ea ±0.8 %FSO 10) 10) Repeatability Er ±0.05 9) Repeatability E ±0.05 % FSO r Total accuracy (pressure) @ -10 Nonlinearity to 85°C Etahysteresis (BFSL) 11) ±1 %FSO &11) pressure El ±0.1 4/4 10) Nonlinearity & pressure hysteresis (BFSL) E ±0.1 ±0.3 % FSO l Repeatability Er ±0.05 R % FSO Load resistance 2 L 11) Load resistance R 2 ∞ k 11) L Nonlinearity & pressure hysteresisMedia (BFSL) E ±0.1 ±0.3 % FSO l compatibility See spec. note 11) Media compatibility See spec. note Load resistance R 2 ∞ k L Weight W 9 Weight W 9 11) g Media compatibility See spec. note 6 HPSD 6000 Barometric Pressure Transducer Weight W Ordering guide Transducer type Transducer HPSD type 6000 9 g Transducer type Pressure range Pressure type HPSD 6000 650M A Pressure range Pressure650M range HPSD 6000 650M 750M Pressure type Pressure A type 750M 800MA 750M 800M 700M 800M 700M 700M Pressure type Pressure range Pressure type 650M 650 to 1150 mbar Pressure range 650M 750M 650 to 1150 mbar 750 to 1100 mbar 650M 750M 800M 650750 to 1150 mbar to 1100 mbar 800 to 1200 mbar Pressure range 750M 800M 700M 750800 to 1100 mbar to 1200 mbar 800M 700M 800700 to 1200 mbar to 1300 mbar 700M 700 to 1300 mbar A Absolute Pressure type A Absolute A Absolute 700 to 1300 mbar Other configurations possible on special request. This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Hyb d.o.o. assumes no obligation regarding future manufacture unless otherwise agreed to in writing. Copyright © Hyb d.o.o., 2010. All rights researved. Bei Rückfragen wenden Sie sich bitte an: For requests please contact : HJK Sensoren + Systeme GmbH & Co. KG Telefon Telefax eMail Internet +49 (0)821-26 99 00 +49 (0)821-26 99 011 [email protected] http://www.hjk.de 0.55 4.55 4.05 ±0.8 ±1 ±0.3 ∞