Revoir

Transcription

Revoir
1000 kVA
Groupe électrogène diesel
Standby
APD 1000 C
Moteur
Cummins
Génératrice Aksa
Système de contrôle P 732 control system
Ce groupe électrogène est conçu pour être conforme aux normes de ISO 8528
Ce groupe électrogène est concu et fabriqué conformément aux spécifications de certificat ISO 9001
Ce groupe électrogène est conforme à la certification CE
Ce groupe électrogène est conforme à la certification CE
3 Évaluations phase, 50 Hz, PF 0,8
Puissance en secours (ESP)
Puisance en prime (PRP)
Tension
kVA
kw
kVA
kw
Amp
400/230
1000,00
800,00
920,00
736,00
1329,00
Puissance en secours
(ESP):
Utilisation sous charge variable à la coupure du réseau. ESP est conforme à ISO 8528. Surcharge n'est pas permise.
Puisance en prime
(PRP):
Utilisation sous charge variable pour une durée annuelle illimité. PRP est conforme à ISO 8528. 10% de surcharge pour une durée d'une
heure sur douze heures (1h/12h) est permise conformément à ISO 3046.
Standard Specifications
Heavy duty, water cooled diesel engine
Radiator with mechanical fan
Protective grille for fan and rotating parts
Electric starter and charge alternator
Starting battery (with lead acid) including rack and cables
Engine jacket water heater
Steel base frame and anti-vibration isolators
Fuel tank under the base frame
Flexible fuel connection hoses
Single bearing, class H alternator
Industrial exhaust silencer and steel bellows supplied separately
Static battery charger
Manual for application and installation
Les options du groupe électrogène
MOTEUR
AUTRES ACCESSOIRES
- Refroidissement par radiateur à distance
- Filtre de séparateur carburant - eau
- Préchauffage d'huile
- Système de remplissage automatique ou manuel
- Alarme de niveau bas et niveau haut du carburant
- Silencieux résidentiel
- Cabines modulaires d'insonorisation et de protection
- Caisse à outil (entretien)
- Kit (Pack) d'entretien de 1500/3000Hr
- Fourni avec huile et refroidisseur - 30 °C
- Ampèremètre de charge
ALTERNATOR
- Résistance anti-condensation
- Disjoncteur de sortie
SYSTEME DE COMMANDE
- Surveillance et Control à distance
- Défaut de terre, groupe unique
- Charge Ampèremètre
TRANSFER SWITCH
- Trois ou quatre contacteur tripolaire
- Trois ou quatre pôles du moteur actionné le disjoncteur
1
Le constructeur se réserve le droit d'apporter des modifications sur les modèles, les caractristiques techniques, la couleur, les équipements et les
accessoires sans aucun avis préalable.
AKS 17062015
1000 kVA
Groupe électrogène diesel
Standby
APD 1000 C
Moteur
Cummins
Génératrice Aksa
Système de contrôle P 732 control system
Spécifications du moteur diesel
Manufacturer
Cummins
Model
KTA 38-G2A
1500 tr/mn
Puissance maximale en secours
895,00 kw
[1200,00HP]
Capacité cubique
L
Alésage et course (mm)
38,000
mm.
159 X 159
Taux de compression
14,5:1
Vitesse nominale (tr/mn)
tr/mn
Capacité d'huile (L)
Capacité de refroidisseur
1500
L
114,00
L
280,00
Débit d'air aspiré (m³ / min)
m3 /min.
67,56
Débit d'air de (m3 /min.)
m3 /min.
1500,00
Débit de gaz d'échappement (m³/min)
m3 /min.
193,50
°C
536,00
Température de gaz d'échappement (° C)
Système d'excitation
24 V d.c.
Load
Consommation de carburant
L/h.
100% de
charge
75% de
charge
50% de
charge
191,00
147,00
98,00
Spécifications de l'alternateur
Marque
Aksa
Modèle
AK7740
Fréquence
Hz
Puissance
kVA
Cos phi
50
925,00
0,80
Phase
3
Tension de génératrice (V)
V
400/230
Courant
A
1337,00
Dimensions et poids
Open Type
Poids (kg.)
kg.
mm.
mm.
mm.
L
APD 1000 C
7950,00
4370,00
2060,00
2400,00
900,00
Groupe
électrogène
avec cabine
Poids (kg.)
Longueur (mm.)
Largeur (mm)
Hauteur (mm.)
Capacité de réservoir
kg.
mm.
mm.
mm.
L
AK 96
11500.00
7500
2300
3170
1000
2
Longueur (mm.)
Largeur (mm)
Hauteur (mm.)
Le constructeur se réserve le droit d'apporter des modifications sur les modèles, les caractristiques techniques, la couleur, les équipements et les
accessoires sans aucun avis préalable.
Capacité de réservoir
AKS 17062015
1000 kVA
Groupe électrogène diesel
Standby
APD 1000 C
Moteur
Cummins
Génératrice Aksa
Système de contrôle P 732 control system
P 732 control system - Système de contrôle
1
Menu navigation buttons
2
Close mains button
3
Main Status and instrumentation display
4
Alarm LED's
5
Close generator button
6
Status LED's
7
Operation selecting buttons
Appareils
DSE, model 7320 Auto Mains Failure control module
Static battery charger
Emergency stop push button and fuses for control circuits
Construction et peinture
Comonents installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion
resistant surface
Polyester composite powder topcoat forms high gloss and extremely durable finish
Lockable hinged panel door provides for easy component access
Montage
Control panel is mounted generating set baseframe on robust steel stand or power module.
Located at side of generating set with properly panel visibility.
Unité de commande du groupe électrogène
The DSE 7320 conrol module is a standard addition to our generator sets from 220 kVA upwards and it has been
designed to start and stop diesel andgas generating sets that include electronic and non electronic engines. The
DSE 7320 includes the additional capability of being able to monitor a mains (utility) supply and is therefore
suitable for controlling a standby generating set in conjunction with an automatic transfer switch.The DSE7320 also
indicates operational status and fault conditions, automatically shutting down the generating set and indicating
faults by means of its LCD display on the front panel.
Spécifications standards
Standard Specifications
Microprocessor controlled
132 x 64 pixel LCD display makes information easy to read
Front panel programming and also via PC software
Soft touch membrane keypad and five key menu navigation
Remote communications via RS232, RS485 and ethernet and SMS messaging
Event logging (50) showing date and time
Multiple date and time engine exercise mode and maintenance scheduler
Engine block heater control.
Controls; stop,manuel, auto, test,start, mute lamp test/transfer to generator, transfer to mains, manu navigation.
3
Le constructeur se réserve le droit d'apporter des modifications sur les modèles, les caractristiques techniques, la couleur, les équipements et les
accessoires sans aucun avis préalable.
AKS 17062015
1000 kVA
Groupe électrogène diesel
Standby
APD 1000 C
Moteur
Cummins
Génératrice Aksa
Système de contrôle P 732 control system
Voyants
Circuits de protection
ENGINE
Engine speed
Oil pressure
Coolant temperature
Run time
Battery volts
Engine maintenance due
GENERATOR
Voltage (L-L, L-N)
Current (L1-L2-L3)
Frequency
Earth current
kW
Pf
kVAr
kWh, kVAh, kVArh
Phase sequence
MAINS
Voltage (L-L, L-N)
Frequency
WARNING
Charge failure
Battery under voltage
Fail to stop
Low fuel level (opt.)
kW over load
Negative phase sequence
Loss of speed signal
PRE-ALARMS
Low oil pressure
High engine temperature
Low engine temperature
Over /Under speed
Under/over generator
frequency
Under/over generator
voltage
ECU warning
SHUT DOWNS
Fail to start
Emergency stop
Low oil pressure
High engine temperature
Low coolant level
Over /Under speed
Under/over generator
frequency
Under/over generator voltage
Oil pressure sensor open
Phase rotation
ELECTRICAL TRIP
Earth fault
kW over load
Generator over current
Negative phase sequence
Options
Standards
High oil temperature shut down
Low fuel level shut down
Low fuel level alarm
High fuel level alarm
EXPANSION MODULES
Editional LED module (2548)
Expension relay module (2157)
Expansion input module (2130)
Elecrical Safety / EMC compatibility
BS EN 60950 Electrical business equipment
BS EN 61000-6-2 EMC immunity standard
BS EN 61000-6-4 EMC emission standard
Chargeur de batterie statique
%DWWHU\FKDUJHULVPDQXIDFWXUHGZLWKVZLWFKLQJPRGHDQG60'WHFKQRORJ\DQGÕWKDVKLJKHIILFLQF\
%DWWHU\FKDUJHUPRGHOV
RXWSXW9,FKDUDFWHULVWLFLVYHU\FORVHWRVTXDUHKDVIXOO\RXWSXWVKRWFLUFXLWSURWHFWLRQDQG
ÕWFDQEHXVHGDVDFXUUHQWVRXUFH
FKDUJHUKDVKLJKHIILFLHQF\ORQJOLIHORZIDLOXUHUDWHOLJKWZHLJKWDQGORZKHDWUDGLDWHGLQDFFRUGDQFHZLWKOLQHDU
DOWHUQDWLYHV
7KHFKDUJHULVILWWHGZLWKDSURWHFWLRQGLRGHDFURVVWKHRXWSXW&KDUJHIDLORXWSXWLVDYDLODEOH&RQQHFWFKDUJHIDLOUHOD\
FRLOEHWZHHQSRVLWLYHRXWSXWDQG&)RXWSXW
,QSXW9
2XWSXW9$RU9$
4
Le constructeur se réserve le droit d'apporter des modifications sur les modèles, les caractristiques techniques, la couleur, les équipements et les
accessoires sans aucun avis préalable.
AKS 17062015
1000 kVA
Groupe électrogène diesel
Standby
APD 1000 C
Moteur
Cummins
Génératrice Aksa
Système de contrôle P 732 control system
AK 96 - Cabine
1
Steel structure made from steel sheet and steel profiles.
2
canopy and panels made from powder coated sheet steel.
3
Emergency stop push button.
4
5
Control panel is mounted on the baseframe . Located at the back of the
generator
Cables outset
locations are under or back of the canopy.
6
Corrosion-resistant locks and hinges.
7
oil could be drained via valve and a hose
8
Exhaust system in the canopy.
9
special large access doors for easy maintanance
10
11
Fuel tank is at front of the canopy ,easy access to the fuel tank via
lockable
door.similar to ISO container , located on each top corner of
Lifting points
12
the
the canopy.
cap on the canopy provides easy accsess to radiator cap.
13
sound proofing materials
A propos du produit
14 Integrated ladder built in to side of the canopy allows access to the top
of theand
canopy.
Sound–attenuated and Weather-protective Enclosures Sound-attenuated
weather protective enclosures for
generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather
and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of
access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures
are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient
capability.
Spécifications standards
Compact footprint, low profile design.
Enclosure, generator set, exhaust system and fuel tank are pre-ssembled, pre-integrated and shipped as one package
Body made from steel components treated with polyester powder coating
Fire retardant foam insulation
Easy access to all service points
Exhaust system inside canopy
Large doors on each side
Control panel viewing window in a lockable access door
Emergency stop push button mounted on enclosure exterior
Cooling fan and battery charging alternator fully guarded
Fuel fill and battery can only be reached via lockable access doors.
Lifting points on the top of canopy and base frame
Customer options available to meet your applications needs.
Aksa makes its generating sets' noise level tests in accordance with directive 2000/14/EC validation of the noise level
test has been aproved by the notified body Szutest
Largeur (mm)
mm.
2300
Longueur (mm.)
mm.
7500
Hauteur (mm.)
mm.
3170
L
1000
Capacité de réservoir de carburant
5
Le constructeur se réserve le droit d'apporter des modifications sur les modèles, les caractristiques techniques, la couleur, les équipements et les
accessoires sans aucun avis préalable.
AKS 17062015

Documents pareils

AJD 400-6

AJD 400-6 Engine jacket cooling heater Base frame design incorporates an integral fuel tank and anti-vibration isolators Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust s...

Plus en détail

ALP 30 - ElitalCo Groupe

ALP 30 - ElitalCo Groupe designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

Plus en détail

Revoir

Revoir designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

Plus en détail