This lis Date of st includes 1 f issue: Jun 13 pages an ne 17 , 2014
Transcription
This lis Date of st includes 1 f issue: Jun 13 pages an ne 17 , 2014
List of publications 6th draft P Prepared by b JJörg Langee This lisst includes 13 1 pages an nd two coveer pages. ne 17th, 2014 4, updated April 13th 2015 Date off issue: Jun Project co-funded under the European Commission Seventh Research and Technology Development Framework programme (2007-2013) Theme 4 NMP – Nanotechnologies, materials and new production technologies Prepared by Jörg Lange Drafting history Draft version 1 Draft version 2 Draft version 3 Draft version 4 Draft version 5 Draft version 6 Final 11.05.2010 30.12.2010 30.9.2011 12.9.2013 22.11.2013 17.6.2014 Dissemination Level PU Public PP Restricted on the other programme participants (including the Commission Services) RE Restricted to a group specified by the Consortium (including the Commission Services) CO Confidential, only for members of the Consortium (including the Commission Services) Verification and approval Coordinator Industrial Project Leader Management Committee Industrial Committee x Seide, P. (1956) On the Torsion of Rectangular Sandwich Plates. Journal of Applied Mechanics Plantema, F.J. (1966) Sandwich Construction. John Wiley & Sons, New York, USA Jungbluth, O. (1968) Sandwich – Flächentragwerke im Stahlbau. Herausgegeben vom Sekretariat der IVBH in Zürich Allen, H.G. (1969) Analysis and Design of Structural Sandwich Panels. Pergamon Press, Oxford, UK Dundrova, V.; Kovarik, V.; Slapak, P. (1970) Biegungstheorie der Sandwich-Platten. Springer-Verlag, Wien – New York. (in German) Beer, H. (1971) Berichte der Arbeitskommissionen der Internationalen Vereinigung für Brückenbau und Hochbau zu in Serie gefertigte Stahlbauten, mithilfe der tschechoslowakischen wissenschaftlichen und technischen Vereinigung und der tschechoslowakischen Gesellschaft der Bauingenieure, Prag Jundbluth, O. (1972) Weitgespannte Sandwichkuppel im Werkstoffverbundsystem Stahlfeinblech – Polyurethanschaum. Herausgegeben vom Sekretariat der IVBH in Zürich Jungbluth, O. (????) Sandwichtragewerke im konstruktiven Ingenieurbau, Rheinisch – Westfälische Akademie der Wissenschaften, Vorträge N 208 Stamm, K.; Witte, H. (1974) Sandwichkonstruktionen - Berechnung, Fertigung, Ausführung. Springer-Verlag, Germany Hofmann, B. (1975) Beitrag zum Trag- und Versagensverhalten von Sandwichtragwerken, Doctoral Thesis, Ruhr University Bochum, Germany Basu, A., K. (1976) Zur Herstellung und zum Werkstoffverhalten von Sandwichtragwerken des Werkstoffverbundsystems Stahlfeinblech-Polyurethan-Hartschaum, Doctoral Thesis, TH Darmstadt, Germany Hartsock, J. A.; Chong, K. P. (1976) Analysis of sandwich panels with formed faces. Proc. ASCE. J.Struct. Div. Vol. 103, No. ST4, April 1976. Chong, K. P.; Egen, K. O.; Hartsock J. A. (1977) Thermal stresses and deflection of sandwich panels. Proc. ASCE, J.Struct.Div. Vol. 103, No. ST1, January 1977 CIB (1978) Recommendations for the structural Design of lightweight Sandwich Panels. Publication 59 Berner, K. (1978) Stahl/Polyurethan – Sandwichelemente unter Temperatur und Brandbeanspruchung. Doctoral Thesis, TH Darmstadt, Germany Linke, K. P. (1978) Zum Tragverhalten von Profilsandwichplatten mit Stahldeckschichten und einem Polyurethan-Hartschaum-Kern bei kurz- und langzeitiger Belastung, Doctoral Thesis, TH Darmstadt, Germany Stamm, K. (1984) Sandwichelemente mit metallischen Deckschichten als Wandbauplatten und Dachbautafeln im Bauwesen. Stahlbau (53), Heft 5 und 8, Ernst & Sohn, Berlin, Germany Schwarze, K. (1984) Numerische Methoden zur Berechnung von Sandwichelementen. Stahlbau (53), Heft 12, Ernst & Sohn, Berlin, Germany Jungbluth, O. (1986) Verbund- und Sandwichtragwerke. Springer, Germany Höglund, T. (1986) Load Bearing Strength of Sandwich Panel Walls with Window Openings. IABSE Reports, Volume 49, page 349-356 Heselius, L. (1986) Elastically braced light gauge beams with open sections. IABSE Reports, Volume 49, page 27-34. + Finnish application Chong Ken P. (1986) Sandwich Panels with Cold-Formed Thin Facings. IABSE Reports, Volume 49, pages 339-348 Davies, J M (1987) Axially loaded sandwich panels. Proc. ASCE, J. Struct. Div. Vol. 113, No. 11, November 1987 Wölfel, E. (1987) Nachgiebiger Verbund – Eine Näherungslösung und deren Anwendungsmöglichkeiten. Stahlbau, Ernst & Sohn, Berlin, Germany Heinisuo, M. (1988) An exact finite element technique for layered beams. Computers and Structures 30 No. 3, pp. 615-622). Burkhardt, S. (1988) Zeitabhängiges Verhalten von Sandwichelementen mit Metalldeckschichten und Stützkernen aus Polyurethanhartschaumstoffen, Doctoral Thesis, Karlsruhe, Germany Hassinen, P.; Helenius, A.; Hieta, J.; Westerlund, A. (1988) Structural sandwich panels at low temperature, IABSE congress report/Rapport du congrès AIPC/IVBH Kongressbericht Vol. 13, pp. 105-110. http://dx.doi.org/10.5169/seals-12974 Burkhardt, S. (1989) Tragfähigkeitsermittlung von Sandwichelementen mit ebenen und schwach profilierten Deckschichten. Stahlbau (67), Heft 12, pp. 23-27, Ernst & Sohn, Berlin, Germany Lindner, J.; Gregull, T. (1989) Drehbettungswerte für Dacheindeckungen mit unterlegter Wärmedämmung. Stahlbau (58), pp. 173-179 Ernst & Sohn, Berlin, Germany Hassinen, P.; Helenius, A. (1990) Design of sandwich panels against thermal loads. IABSE reports/Rapports AIPC/IVBH Berichte Vol. 60, pp. 605-610. http://dx.doi.org/10.5169/seals46552 Kech, J. (1991) Druckbeanspruchbarkeit der biegeweichen Deckschicht eines Sandwichelements. Stahlbau (60), Heft 7, Ernst & Sohn, Berlin, Germany Kühhorn, A. (1991) Geometrisch nichtlineare Theorie für Sandwichschalen unter Einbeziehung des Knitterphänomens, Doctoral Thesis TU Berlin, printed in VDI-Verlag, Düsseldorf, Germany Davies M. J.; Hakmi M. R. (1991) Postbuckling behaviour of foam-filled thin-walled steel beams. Journal of Constructional Steel Research 20: 75 - 83 Davies, J.M.; Hakmi, M.R.; Hassinen, P. (1991) Face Buckling Stresses in Sandwich Panels. Proc of Nordic Steel Colloquium. Danish Steel Institute. Pages 99-110 Just, M. (1992) Zum Langzeitverhalten von Sandwichplatten mit einem PolyurethanHartschaumstoffkern. Bauingenieur (67), Springer Verlag, Germany, page 83-89 Chong, K. P. (1993) Structural analysis and design of sandwich panels with cold-formed steel facings. Thin-Walled Structures 16 (1993), pp. 199-218 Ladwein, T. (1993) Zur Schubfeldwirkung von Sandwichelementen. Stahlbau (62), Heft 11 and Heft 12, Ernst & Sohn, Berlin, Germany Davies, J. M. (1993) Sandwich panels. Thin-Walled Structures 16, pp. 179-198 Schulz, U. (1993) Zum Zwischenstützbereich von Sandwichelementen bei Mehrfeldträgersystemen. Stahlbau (62), Heft 10, Ernst & Sohn, Berlin, Germany Zhao, H. L. (1993) Ein Beitrag zur Berechnung der Knitterspannung inhomogener oder anisotroper Sandwichplatten, Fortschritt-Berichte, VDI Serial 18, Düsseldorf, Germany Berner, K.; Davies, J.M.; Heselius, L.; Helenius, A. (1994) The durability of structural sandwich elements. Materials and Structures 27, page 33-39 Baehre, R.; Ladwein, T. (1994) Tragfähigkeit und Verformungsverhalten von Scheiben aus Sandwichelementen mit Stahldeckschichten und PUR-Hartschaumkern: Forschungsbericht (AiF-Nr. 8193) Studiengesellschaft Stahlanwendung e.V., ISBN: 3-930621-29-0 Baehre, R.; Ladwein, T. (1994) Diaphragm action of sandwich panels. Journal of Constructional Steel Research, 31(2/3), page 305-316 Riedeburg, K. (1994) Untersuchungen zum wirtschaftlichen Einsatz von Sandwichelementen in Dächern und Wänden. Institut für Stahlbau Leipzig GmbH, Leipzig, Germany Berner, K. (1994) Erarbeitung vollständiger Bemessungsgrundlagen im Rahmen bautechnischer Zulassungen für Sandwichbauteile. Tl.1 - Bemessungsgrundlagen in Form von Rechenhilfen für alle relevanten Lastfälle und statischen Systeme. Fraunhofer IRB Verlag, Stuttgart, Germany Berner, K. (1995) Erarbeitung vollständiger Bemessungsgrundlagen im Rahmen bautechnischer Zulassungen für Sandwichbauteile. Tl.2 - Berücksichtigung zusätzlicher Beanspruchungen bei der Bemessung von durchlaufenden Sandwichplatten im Zwischenstützenbereich. Fraunhofer IRB Verlag, Stuttgart, Germany Zenkert, D. (1995) An Introduction to Sandwich Construction. EMAS Publishing, London, UK Schulz, U.; Ummenhofer, T. (1995) Tragverhalten von Sandwich-Elementen mit Mineralfaserkernen. Bautechnik (72) Heft 10, pp. 642-654. Ernst & Sohn, Berlin, Germany Berner, K.; Hassinen, P.; Heselius, L. (1995) Present Design Methods of Lightweight Sandwich Panels. Proceedings of Nordic Steel Construction Conference '95 held in Malmö, Sweden, June 19-21, 1995. Volume II, pp. 637-644. Kilpeläinen, T.; Hassinen, P. (1995) Long-Term Behaviour and Strength of EPS Foam Sandwich Panels. Proceedings of Nordic Steel Construction Conference '95 held in Malmö, Sweden, June 19-21, 1995. Volume II, pp. 645-652. Martikainen, L.; Hassinen, P. (1996) Load-bearing capacity of continuous sandwich panels. Helsinki University of Technology, Department of Structural Engineering. Report 135 Hassinen, P. (1997) Evaluation of the Compression Strength of Profiled metal Sheet Faces of sandwich Panels. Thin-Walled Structures Vol. 27, No. 1, pp. 31-42 Hassinen, P.; Martikainen, L.; Berner, K. (1997) On the Design and Analysis of Continuous Sandwich Panels. Thin-Walled Structures Vol. 29, Nos. 1-4, pp. 129-139 Hassinen, P.; Martikainen, L. (1997) Design of continous lightweight structural sandwich panels. IABSE reports/Rapports AIPC/IVBH Berichte, pp. 337-342. http://dx.doi.org/10.5169/seals-991 Berner, K. (1998) Praxisgerechte Nachweise zur Trag- und Gebrauchsfähigkeit von Sandwichbauteilen. Stahlbau (67), Heft 12, Ernst & Sohn, Berlin, Germany Hassinen, P.; Heselius, L. (1998) Influence of the Flexibility of the Fastenings on the Behaviour of Stone Wool Cored Sandwich Panels. In : Sandwich Construction 4. Engineering Materials Advisory Services Ltd., London (Ed. K.-A. Olsson), Volume I, pp. 411-422. Hassinen, P. (1998) Advanced Design of Light-Weight Sandwich Panels. Norwegian Steel Association, Proc. of Nordic Steel Construction Conference 98 held in Bergen, Norway, September 14-16, 1998. Volume I, pp. 149-156 De Matteis, G. (1998) The effect of cladding panels in steel under seismic actions. Tesi di Dottorato, University of Napoli, Italy Courage, W.M.G.; Tomà, A.W. (1998) Structural Detailing of Openings in Sandwich Panels. TNO Building and Construction Report. Official Publication of the European Commission EUR 18459 EN. Buchholz, E. (1999) Prüfung bautechnischer Unterlagen von Dacheindeckungen aus Sandwichbauteilen. Der Prüfingenieur, Germany Meyer, J. (1999) Die analytische Bestimmung der Knitterspannung einachsig gespannter Sandwichplatten. Doctoral Thesis. TU Darmstadt, Germany Hassinen, P. (1999) Modelling of continuous sandwich panels. ICSAS 1999. pp. 189-196 De Matteis, G.; Landolfo, R. (1999) Mechanical fasteners for cladding sandwich panels: Interpretative models for shear behaviour. Thin-Walled Structures (35), page 61-79 Wadee, M.A. (1999) Experimental Evaluation of Interactive Buckle Localization in Compression Sandwich Panels. Journal of Sandwich Structures and Materials; 1; S. 230-254. Wadee, M.A. (2000) Effects of periodic and localized imperfections on struts on nonlinear foundations and compression sandwich panels. International Journal of Solids and Structures 37, S. 1191-1209 Lange, J.; Berner, K. (2000) Berücksichtigung zusätzlicher Beanspruchungen von durchlaufenden Sandwichplatten im Innenstützen-Bereich. Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. H. Bode, Kaiserslautern, Germany Berner, K.; Davies, J.M.; Hassinen, P.; Heselius, L. (2000) Updated European Recommendations for Sandwich Panels. Sandwich Construction 5, Volume II, page 389-400. Koschade, R. (2000) Die Sandwichbauweise. Ernst & Sohn, Berlin, Germany Hassinen, P.; Martikainen, L. (2000) Resistance of Sandwich Panels against Local Loads. In: Sandwich Construction 5. Engineering Materials Advisory Services Ltd., UK (Eds. MeyerPiening, H.-R.; Zenkert, D.), Volume I (Proceedings of the 5th International Conference on Sandwich Construction, Zürich, Switzerland, September 5-7, 2000). pp. 279-288. De Matteis, G.; Landolfo, R. (2000) Modelling of lightweight sandwich shear diaphragms for dynamic analyses. Journal of Constructional Steel Research 53 (2000) 33-61 European Recommendations for sandwich panels, Part I: Design published by - CIB (2000), CIB/ECCS Report, Publication 257 - ECCS (2001), ECCS Publication No. 115 Davies, JM. (Editor) (2001) Lightweight Sandwich Construction, Blackwell Science Ltd. UK Ewert, T.; Banke, F.; Schulz, U.; Wolters, M. (2001) Untersuchung zum Knittern von Sandwichelemente mit ebenen und gesickten Deckschichten. Stahlbau (70), Heft 7, Ernst & Sohn, Berlin, Germany Koschade, R. (2001) Sandwichbauweise und Gestaltung-Sandwichbauweise als Symbiose von Design, Technik, Ökonomie und Ökologie-eine Alternative für die Architektur, Teil 1, DAB Bautechnik, 5/01 Koschade, R. (2001) Sandwichbauweise und Gestaltung, Teil 2, DAB Bautechnik, 6/01 Beck, A. (2001) „Styropor“ und „Styrodur“ Expandierter und extrudierter PolystyrolHartschaumstoff, Bautechnik DAB 4/01 Podleschny, R. (2001) Wirtschaftlicher und sicherer Tiefkühlhausbau durch Sandwichbauweise, IFBS 2/01, 16. Jahrgang, Düsseldorf, Germany Hedman-Pétursson E. (2001) Column Buckling with Restraint from Sandwich Wall Elements. Doctoral thesis 2001:27. Luleå University of Technology. Cooke, G. M. E. (2002) Stability of Lightweight Structural Sandwich Panels exposed to Fire. Second International Workshop “Structures in Fire”, Christchurch, New Zealand, March 2002 Wolters, M.; Banke, F.; Ewert, E.; Schulz, U. (2002) Untersuchungen zum Knittern von imperfekten Sandwichelementen. Stahlbau 71 (2002), Heft 4, Ernst & Sohn, Berlin, Germany Wiegmann, R. (2002) Temperaturen als Lastfall bei Sandwichelementen. Industrieverband zur Förderung des Bauens mit Stahlblech, 2/02, 17. Jahrgang, Düsseldorf, Germany Aalto, J.; Hassinen, P. (2003) Utilization of the in-plane stiffness of sandwich panels. Metal Structures (ed. Jarmai & Farkas), Millpress, Rotterdam, Netherlands. Reentilä, M. (2003) Climatic Durability of Adhesively Bonded sandwich Structures with Rock Wool Cores. Doctoral thesis. Publication 436. Tampere University of Technology. Pokharel, N.; Mahendran, M. (2003) Experimental investigations and design of sandwich panels subject to local buckling effects. Journal of Constructional steel research 59: 15331552 Kasper, P. (2003) Effekte von lokalen Lasten auf Sandwichelemente. Proceedings of the conference Leicht bauen 13.-14.3.2003, Institut für Stahlbau und Werkstoffmechanik, Darmstadt, Germany, page 201-210 Timár, I.; Horváth, P.; Borbély, T. (2003) Optimierung von profilierten Sandwichbalken. Stahlbau 72 (2003), Heft 2, Ernst & Sohn, Berlin, Germany Berner, K.; Pfeiffer, L.; Lamers, M. (2004) Tragende SIP Sandwich Elemente für den Wohnungs- und Hallenbau. Bauingenieur Band (79), Springer Verlag, Germany Möller, R.; Pöter, H.; Schwarze, K. (2004) Planen und Bauen mit Trapezprofilen und Sandwichelementen. Band 1. Ernst & Sohn, Berlin, Germany Lange, J.; Böttcher, M. (2004) Sandwich Panels with Openings. Conference "Composite Construction V", Berg-en-Dal, South Africa, 18th to 23rd of July 2004 Wiegmann, R. (2004) Berechnungen von Sandwichelementen im Bereich von Auskragungen. IFBS Industrieverband für Bausysteme im Stahlleichtbau, 2/04 19. Jahrgang, Düsseldorf, Germany Podleschny, R. (2004) Stahlsandwichelemente mit Steinwollkern. IFBS Industrieverband für Bausysteme im Stahlleichtbau, 1/04 18. Jahrgang, Düsseldorf, Germany Berner, K. et al. (2005): Practical Guide to EN 14509; iS-mainz, Germany Böttcher, M. (2005) Wand Sandwich-Elemente mit Öffnungen. (Wall Sandwich-Elements with Openings) Doctoral Thesis, TU Darmstadt, Germany Cooke, G. M. E. (2005) Stability of Lightweight Structural Sandwich Panels exposed to Fire. Fire and Materials, John Wiley & Sons Heselius, L. (2005) Wrinkling analysis of flat faced sandwich panels with respect to bonding strength and core properties with mineral wool as core material. Doctoral Thesis, TU Darmstadt, Germany Pfeiffer, L. (2005) Durability Assessment of Sandwich Construction. Doctoral Thesis. University of Surrey, UK Lange, J.; Böttcher, M. (2005) Tragverhalten und Bemessung von Sandwichelementen und Trapezprofilen aus Stahl. Dokumentation 588 of the Stahl-Informations-Zentrums: Dach- und Fassadenelemente aus Stahl – Erfolgreich Planen und Konstruieren. Düsseldorf, Germany May 2005 (in german) Hassinen, P. (2005) Resistance of fastenings of sandwich structures. Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Proceedings of the 7th International Conference on Sandwich Structures, Aalborg University, Aalborg, Denmark, 29–31 August 2005, Ed. O. T. Thomsen et al. pp. 471-476 Pokharel N.; Mahendran M. (2005) An investigation of lightly profiled sandwich panels subject to local buckling and flexural wrinkling effects. Journal of Constructional Steel Research 61: 984-1006 Lange, J.; Böttcher, M. (2006) Theoretische und experimentelle Grundlagen für die Berechnung von Wand-Sandwichelementen mit Öffnungen (Theoretical and experimental Analysis of Wall Sandwich Panels with Openings). Bauingenieur, Springer VDI Verlag, Germany Böttcher, M. (2006) Berechnungsverfahren für Wand-Sandwichelemente mit Öffnungen. IFBS Heft 5.09, Düsseldorf, Germany Berner, K. (2006) Öffnungen in Sandwichbauteilen. (Openings in Sandwich Panels). Proceedings of the conference „Leicht bauen” 16.-17.3.2006, Institut für Stahlbau und Werkstoffmechanik, Darmstadt, Germany, p. 145-166 Peil, U.; Ruff, D. (2006) Leichte Träger aus Sandwichelementen für die Bauwerkssanierung – experimentelle Untersuchungen; Bauingenieur Band 81, Germany Wiegmann, R. (2006) EPAQ Europäische Qualitätssicherung von Sandwichelementen, Industrieverband für Bausysteme im Metallleichtbau (IFBS), 21. Jahrgang 1/06, Düsseldorf, Germany Berner, K., Raabe, O. (2006) Statik. Bemessung von Sandwichbauteilen, IFBS Heft 5.08, Düsseldorf, Germany Gesamtverband der Deutschen Versicherungswirtschaft e.V. (Editor) (2006) Sandwichelemente als raumabschließende Wand- und Dachbauteile - Brandschutz-Hinweise für die Planung, Ausführung und Instandhaltung. VdS Schadenverhütung GmbH, Köln, Germany Dürr, M.; Podleschny, R.; Saal, H. (2007) Untersuchungen zur Drehbettung von biegedrillknickgefährdeten Trägern durch Sandwichelemente. Stahlbau (76), Ernst & Sohn, Berlin, Germany Katnam, K.B.; Van Impe, R.; Lagae, G.; De Strycker, M. (2007) Modelling of cold-formed steel sandwich purlin-sheeting systems to estimate the torsional restraint. Thin-walled structures 45, p. 584-590 Izabel, D. (2007) Formulaire de Résistance des Matériaux. Tome 4: Détermination des charges critiques de flambement d´éléments comprimés. Les Cahiers Pratiques du SNPPA, Paris, France Peil, U.; Ruff, D. (2007) Leichte Tragelemente aus Verbundwerkstoffen – Eine Anwendung für die Bauwerkserhaltung und –sanierung, VDI Berichte Nr. 1970 EN 14509 (2007) Self-supporting double skin metal faced insulating panels - Factory made products – Specifications (Selbsttragende Sandwichelemente mit beidseitigen Metalldeckschichten - Werkmäßig hergestellte Produkte – Spezifikationen). CEN, Brussels, Belgium Linke, Markus (2008) Finite Elemente für Sandwichplatten basierend auf semi-analytischen Ansätzen. Shaker Verlag (Berichte aus der Luft- und Raumfahrttechnik) Aachen, Germany Fiedler, T.; Öchsner, A. (2008) Experimental analysis of the flexural properties of sandwich panels with cellular core materials. Mat.-wiss. U. Werkstofftech. 2008, 39, No.2 Georgescu, M; Ungureanu, V. (2008) Experimental procedure, modelling the distortional behavior of Z purlins in sandwich panel roofs. Proceedings of the conference EUROSTEEL 2008, Graz, Austria Misiek, Th.; Saal, H.; Kathage, K. (2008) Durchknöpftragfähigkeit der Befestigungsmittel von Sandwichelementen bei direkter Befestigung (Pull-through resistance of fasteners for sandwich-panels). Stahlbau (77), Ernst & Sohn, Berlin, Germany Möller, R. (2008) Sandwichelemente für den Einsatz in der Antarktis (The use of sandwich elements for the Antarctic research station). Stahlbau (77), Ernst & Sohn, Berlin, Germany Mertens, R. (2008) Untersuchung von Zwangsschnittgrößen bei ebenen PolyurethanSandwichelementen. Doctoral Thesis, TU Darmstadt, Germany Lange, J.; Mertens, R. (2008) Abminderung der Knitterspannung bei Sandwichelementen mit Polyurethankern unter erhöhter Temperatur (Reducing the Wrinkling Stress of Sandwich Panels with a Polyurethane Core under high Temperatures). Stahlbau (77), Ernst & Sohn, Berlin, Germany Berner, K. (2008) Sandwich-Dachbauteile für Flachdächer (Sandwich panels for roof covering). Stahlbau (77), Ernst & Sohn, Berlin, Germany Dürr, M.(2008) Die Stabilisierung biegedrillknickgefährdeter Träger durch Sandwichelemente und Trapezbleche. Karlsruhe: Berichte der Versuchsanstalt für Stahl, Holz und Steine der Universität Fridericiana in Karlsruhe, 5. Folge Heft 17, Germany Georgescu, M.; Ungureanu, V. (2008) Experimental procedure, modeling the distortional behavior of z purlins in sandwich panel roofs, EUROSTEEL 2008, 3.-5. September 2008, Graz, Austria Preliminary European Recommendations for the Testing and Design of Fastenings for Sandwich Panels. Published by: - CIB (2009), CIB/ECCS Report, Publication 320 - ECCS (2009), ECCS Publication No. 127 Berner, K. (2009) Selbsttragende und aussteifende Sandwichbauteile – Möglichkeiten für kleinere und mittlere Gebäude (Self bearing and racking sandwich panels – possibilities for small and middle sized buildings). Stahlbau (78), Ernst & Sohn, Berlin, Germany Berner, K. ; Kurpiela, A. (2009) Entwicklung eines neuen brandfesten Kernwerkstoffs für Sandwichpaneele im Bauwesen, Research Report SwichCore, Fraunhofen IRB Verlag, T 3210, Germany Berner, K. ; Kurpiela, A. ; Pfaff, U. (2009) Entwicklung und Erforschung von Sandwichelementen für Flachdacheindeckungen, Research Report SandFlat, Fraunhofen IRB Verlag T 3209, Germany Hassinen, P.; Misiek, Th. (2009) Fixing of sandwich panels in building applications. Nordic Steel Construction Conference, Malmö, Sweden, 2nd to 4th of September 2009 Studzinski, R.; Pozorski, Z.; Garstecki, A. (2009) Optimal Design of Sandwich Panels with a soft Core. Journal of Theoretical and Applied Mechanics, Warsaw, page 685-699 Zha Xiao-xiong; Qin Pei-cheng; Yu Min (2009) Experimental and Numerical Studies on the Mechanical Behavior of Foam Core Supported Steel Sandwich Panels, The 5th International Symposium on Steel Structures, Seoul, Korea Das, Manabendra; Oterkus, Erkan; Madenci, Erdogan; Razi, Hamid (2009) Residual strength of sandwich panels with hail damage. In: Composite Structures 88 (3), S. 403–412. DOI: 10.1016/j.compstruct.2008.05.002. Lange, J; Berner, K. (2010) Sandwichelemente im Hochbau (Sandwich panels in Construction). Stahlbau-Kalender 2010, Ernst & Sohn, Berlin, Germany Berner, K. (2010) Gekrümmte Sandwichpaneele (Curved Sandwich Panels). Stahlbau (79), Ernst & Sohn, Berlin, Germany Misiek, T.; Käpplein, S.; Dürr, M; Saal, H. (2010) Stabilisation of Beams by Sandwich Panels – New Regulations and Recent Research Results. Proceedings of CIB World Congress, May 10-13, 2010, University of Salford, UK Misiek, T.; Hassinen, P. (2010) A unified approach for the local buckling of sandwich panels and trapezoidal sheeting. Proceedings of CIB World Congress, May 10-13, 2010, University of Salford, UK Lange, J.; Warmuth, F. (2010) Openings in Sandwich Elements. Proceedings of CIB World Congress, May 10-13, 2010, University of Salford, UK Kurpiela, A.; Lange, J.; Berner, K. (2010) Optimization of Geometry and Core Materials of Sandwich Panels with metallic Faces. Proceedings of CIB World Congress, May 10-13, 2010, University of Salford, UK Davies, MJ; Hassinen, P.; Heselius, L.; Misiek, Th. (2010) ECCS/CIB joint committee on sandwich constructions: Recent European Recommendations on design and testing. Proceedings of CIB World Congress, May 10-13, 2010, University of Salford, UK Hassinen, P.; Pfeiffer, L. (2010) Methods to Measure the Durability of Structural Sandwich Panels. In: P.S. Barrett ; D. Amaratunga ; R. Haigh ; Keraminiyage and C. K. Pathirage (Editors): W056 - Special Track 18th CIB World Building Congress, May 10-13, 2010 Salford, UK, Volume 342. Rotterdam, Netherlands (CIB Publication, 342). Online available at: http://www.irbnet.de/daten/iconda/CIB18792.pdf. Käpplein, S.; Misiek, Th.; Dacheva, Th.; Ummenhofer, Th. (2010) Introduction of tensile Forces in Sandwich Panels with mechanical Fasteners. Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July 2010 Kurpiela, A.; Lange, J.; Berner, K. (2010) Optimization of Geometry and Core Materials of Sandwich Panels with metallic Faces. Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July 2010 Rädel, F.; Lange, J. (2010) Openings in Sandwich Panels. Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July 2010 Vayas, I.; Dasiou, M.-E.; Lignos, X. A. (2010) Experimental and numerical Investigation of Polyurethane Sandwich Panels. Proceedings of the Conference Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, September 8 - 10, 2010 Misiek, Th.; Käpplein, S.; Kathage, K. (2010) Pull-through Resistance of tensile-loaded Screw Fastenings of thin-walled sheeting and Sandwich Panels. Proceedings of the Conference Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, September 8 10, 2010 Käpplein, S.; Ummenhofer, Th. (2010) Classification of Stability Failure Modes of Sandwich Panels under Compression Loading: Global and local Buckling, Crippling at Support Line. Proceedings of the Conference Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, September 8 - 10, 2010 Lange, J.; Rack, W.; Kurpiela, A.; Rädel, F.; Hörnel-Metzger, B. (2010) Stahlleichtbau mit Verbundelementen (Lightweight steel construction with composite elements). Stahlbau (79), Heft 10, Ernst & Sohn, Berlin, Germany Käpplein, S.; Misiek, Th.; Ummenhofer T. (2010) Aussteifung und Stabilisierung von Bauteilen und Tragwerken durch Sandwichelemente, Stahlbau (79), S. 336-344, Ernst & Sohn, Berlin, Germany Käpplein, S.; Ummenhofer, T. (2010) Axial beanspruchte Sandwichelemente in rahmenlosen Konstruktionen (Axially loaded sandwich panels in frameless buildings). Stahlbau (79) Heft 10, pp. 761-770, DOI: 10.1002/stab.201001367 Pöter, Hans (2010) Bausysteme aus Stahl für Dach und Fassade. Stahl-Informations-Zentrum (Dokumentation 558), Düsseldorf, Germany Horstmann, M. (2010) Zum Tragverhalten von Sandwichkonstruktionen aus textilbewehrtem Beton. RWTH Aachen, Aachen, Germany Sharaf, Tarek; Shawkat, Waleed; Fam, Amir (2010) Structural performance of sandwich wall panels with different foam core densities in one-way bending. (Strukturelle Leistungsfähigkeit von Sandwich-Wandpaneelen mit unterschiedlichen Dichten des Schaumkerns im Biegeversuch). In: Journal of Composite Materials 44 (19), S. 2249–2263. Online available at http://dx.doi.org/10.1177/0021998310369577 Georgescu, M.; Ungureanu, V. (2010) Improved design model for thin-walled cold-formed purlins continuously connected to sandwich panel roofing. Proceedings of the First International Conference on Structures and Architecture ICSA 2010 Guimarães, Portugal Rädel, F.; Lange, J. (2011) Eccentrically loaded sandwich elements. Conference Proceedings EUROSTEEL 2011, p. 801-806, Budapest, August 2011, Hungary Misiek, T.; Käpplein, S.; Saal, H.; Ummenhofer, T. (2011) Stabilisation of beams by sandwich panels – Lateral and torsional restraint. Conference Proceedings EUROSTEEL 2011, p. 615-620, Budapest, August 2011, Hungary Georgescu, M.; Ungureanu, V.; Dubina, D. (2011) Diaphragm effect in sandwich panel roofing – Experimental approach. Conference Proceedings EUROSTEEL 2011, p. 165-170, Budapest, August 2011, Hungary Misiek, T.; Hassinen, P.; Naujoks, B. (2011) Cladding systems for sandwich panels – Refurbishment of walls and roofs. Conference Proceedings EUROSTEEL 2011, p. 21992204, Budapest, August 2011 Misiek, Th.; Ummenhofer, Th. (2011) Crest-fixing of profiled sandwich panels without saddle washers. Advances in Steel and Aluminum Structures, Research Publishing Services, p. 515521 Käpplein, S.; Ummenhofer, Th. (2011) Querkraftbeanspruchte Verbindungen von Sandwichelementen (Shear loaded fastenings of sandwich panels). Stahlbau (80), Heft 8, p. 600-607, Ernst & Sohn, Berlin, Germany Rädel, F.; Lange, J. (2011) Tragfähigkeit von Sandwichelementen mit profilierten Deckschichten und Öffnungen (Load bearing capacity of sandwich panels with profiled faces and openings). Stahlbau (80), Heft 9, p. 656-661, Ernst & Sohn, Berlin, Germany Lange, J.; Berner, K.; Hörnel-Metzger, B. (2011) Wandscheibentragfähigkeit von Sandwichelementen (Racking strength and stiffness of sandwich wall panels). Stahlbau (80), Heft 9, p. 673-677, Ernst & Sohn, Berlin, Germany Misiek, Th.; Frank, F.; Ummenhofer, Th. (2011) Load-bearing capacity of longitudinally stiffened thin-walled sheeting on an elastic foundation provided by insulation materials. Advances in Steel and Aluminum Structures, Research Publishing Services, p. 615-621 Misiek, Th.; Frank, F.; Ummenhofer, Th. (2011): Tragfähigkeit dünnwandiger Bleche mit elastischer Bettung und Längsversteifungen. Stahlbau (80), p. 650-655, Ernst & Sohn, Berlin, Germany Hassinen, P.; Misiek, Th.; Naujoks, B. (2011) Fassadensysteme für Sandwichwände. Stahlbau (80), p. 642-649, Ernst & Sohn, Berlin, Germany Misiek, Th., Käpplein, S., Hettmann, R., Saal, H., Ummenhofer, Th. (2011) Rechnerische Ermittlung der Tragfähigkeit der Befestigung von Sandwichelementen. Bauingenieur (86), p. 418-424, Germany Rädel, F.; Lange, J. (2011) Die Fugendichtigkeit von Sandwichelementkonstruktionen – Wasser- und Luftdichtigkeit in Längsfugen und Fensteranschlussfugen. Festschrift zum 60. Geburtstag von Gerhard Hanswille, Institut für Konstruktiven Ingenieurbau, Bergische Universität Wuppertal, Heft 20 Misiek, Th.; Hassinen, P. (2011) Influence of imperfections and of discontinuities of the elastic foundation on the buckling strength of plane cross-section parts of sandwich panels. Proceedings of the 6th international Conference on Thin walled structures – Recent research advances and trends, 5-7 September 2011, Timisoara, Romania, ECCS, Brussels, p. 721-738 Misiek, Th.; Käpplein, S. (2011) Pull-through resistance of tensile-loaded screw-fastenings of thin-walled sheeting and sandwich panels. Proceedings of the 6th international Conference on Thin walled structures – Recent research advances and trends, 5-7 September 2011, Timisoara, Romania, ECCS, Brussels, p. 521-528 Yang, Y.; Fallah, A.S.; Saunders, M.; Louca, L.A. (2011) On the dynamic response of sandwich panels with different core set-ups subject to global and local blast loads. Engineering Structures 33, Elsevier, p. 2781-2793 Koschade, R. (2011) Sandwichbauweise – Konstruktion, Systembauweise, Ökologie. Edition DETAIL, München Möller, R.; Pöter, H.; Schwarze, K. (2011) Planen und Bauen mit Trapezprofilen und Sandwichelementen: Gestaltung, Planung, Ausführung. Ernst & Sohn, Berlin, Germany Ungermann, D.; Lübke, S. (2012) Bemessungsmodell zur Durchknöpftragfähigkeit von Sandwichelementen bei direkter Verankerung. Stahlbau (81), p. 906-911, Ernst & Sohn, Berlin, Germany Ungermann, D.; Lübke, S. (2012) Innovative einseitige Verankerung von Sandwichelementen. Stahlbau (81), p. 912-915, Ernst & Sohn, Berlin, Germany Hassinen, P.; Misiek, Th. (2012) Einfluss von Inhomogenitäten im Kernwerkstoff von Sandwichelementen auf die Tragfähigkeit. Stahlbau (81), p. 935-943, Ernst & Sohn, Berlin, Germany Naujoks, B.; Zapfe, C. (2012) Photovoltaikelemente auf bestehenden Sandwichdachelementen – Einfaches Bemessungskonzept für Punktlasten. Stahlbau (81), p. 944-950, Ernst & Sohn, Berlin, Germany Käpplein, S.; Berner, K.; Ummenhofer, Th. (2012) Stabilisierung von Bauteilen durch Sandwichelemente. Stahlbau (81), pp. 951-958, Ernst & Sohn, Berlin, Germany Helfen, C.; Diebels, S. (2012) Numerical Multiscale Modelling of Sandwich Plates. Technische Mechanik (ISSN 0232-3869), pp. 251-264, Magdeburg, Germany Lange, J.; Kurpiela, A. (2012) Optimization Algorithm for Sandwich Panels. Nordic Steel Construction Conference, 5-7 September 2012, Oslo, Norway Karlsson, D. (2012) Fire safe Constructions with Sandwich Panels. Nordic Steel Construction Conference, 5-7 September 2012, Oslo, Norway Georgescu, M.; Ungureanu, V. (2012) Stabilization of continuous Z-purlins by Sandwich Panels: Full Scale Experimental Approach. Proceedings of the 6th International Conference on Coupled Instabilities in Metal Structures. Glasgow, Scotland Imperadori, M. (2012) Sandwich Architecture – Designing and constructing with polyurethane sandwich panels. Nelke, H.; Lange, J. (2013) Experiments on fatigue behaviour of sandwich panels. Cape Town, Research and Applications in Structural Engineering, Mechanics and Computation – Zingoni (Ed.), Taylor & Francis Group, London, ISBN 978-1-138-00061-2 Käpplein, S.; Misiek, Th. (2013) Stabilisierung von Bauteilen durch Sandwichelemente – Kopplung mit quasi-starren Auflagern (Stabilization of the supporting structure by sandwich panels – Coupling with quasi-rigid supports). Stahlbau (82), pp. 828-832, Ernst & Sohn, Berlin, Germany EN 14509 (2013) Self-supporting double skin metal faced insulating panels - Factory made products – Specifications (Selbsttragende Sandwichelemente mit beidseitigen Metalldeckschichten - Werkmäßig hergestellte Produkte – Spezifikationen). CEN, Brussels, Belgium Berner, K.; Pfaff, U. (2013) Revision 1 zur EN 14509: Selbsttragende Sandwichelemente – Änderungen und Neuerungen (Revision 1 to EN 14509 – Changes and news). Stahlbau (82), pp. 833-842, Ernst & Sohn, Berlin, Germany Tusnina, O. (2013) An approximate analytical method for design of thin-walled Z-purlins supported by sandwich panels. Journal of Structural Mechanics, Vol. 46, No 1, pp. 1-13 Kurpiela, A.; Lange, J. (2013) Optimierung von Sandwichwandbauteilen (Optimization of wall sandwich panels). Stahlbau (82), pp. 843-850, Ernst & Sohn, Berlin, Germany Berner, K.; Hassinen, P.; Heselius, L.; Izabel, D.; Käpplein, S.; Lange, J.; Misiek, Th.; Rädel, F.; Tillonen, A.; Zupancic, D. (2013) New European Recommendations for the Design and Application of Sandwich Panels - Results of the Work of the Joint Committee on Sandwich Constructions. Steel Construction (6), pp. 294-300, Ernst & Sohn, Berlin, Germany Kurpiela, A (2013) Optimierung von Sandwichwandbauteilen mit PUR-Kern und Stahldeckschichten. Doctoral Thesis, TU Darmstadt, Germany Rädel, F. (2013) Untersuchungen zur Tragfähigkeit von Sandwichelementen mit Öffnungen. Doctoral Thesis, TU Darmstadt, Germany Tusnina, O. (2013) Design of Thin-Walled Z-Purlin Connections with Sandwich Panels in Roofs Made by Rivets. Proceedings of the Conference “Design, Fabrication and Economy of Metal Structures”, Miskolc, Hungary, April 24-26, 2013 Čuk, M.; Štih, S.; Jerman, J. (2013) Finite Element Analysis of Sandwich Panels with Longitudinal Joints and Large Openings. Tehnički vjesnik (Technical Gazette) 20, 2(2013), pp. 275-284, ISSN 1330-3651 (Print), ISSN 1848-6339 (Online), Slavonski Brod, Croatia Lübke, S. (2014) Zur Tragfähigkeit von Sandwichelementen unter lokaler Beanspruchung. Doctoral Thesis, TU Dortmund, Germany Gosowski , B., Gosowski, M. (2014) Exact solution of bending problem for continuous sandwich panels with profiled facings. Journal of Constructional Steel Research 101, Elsevier, pp. 53-60 Georgescu, M.; Ungureanu, V. (2014) Stabilization of continuous Z-Purlins by Sandwich Panels: Full Scale experimental Approach. Thin-Walled Structures. Georgescu, M.; Ungureanu, V.; Dubina, D. (2014) Full Scale Experimental Approach of Sandwich Panel Roofing Diaphragm Action. International Conference on Thin-Walled Structures, Busan, Korea ECCS (2014) Preliminary European Recommendations for the Design of Sandwich Panels with Openings – a State of the Art Report. ECCS TWG 7.9 and CIB Working Commission W056 ECCS (2014) European Recommendations on the Stabilization of Steel Structures by Sandwich Panels. ECCS TWG 7.9 (No. 135) and CIB Working Commission W056 (No. 379) Ungermann, D.; Lübke, S. (2014) Innovative Verankerung von Sandwichelementen. Forschungsvereinigung Stahlanwendung FOSTA e.V. (P794), Düsseldorf, Germany Ungermann, D.; Lübke, S. (2014) Optimierung der Auflagerung von Sandwichelementen. Forschungsvereinigung Stahlanwendung FOSTA e.V. (P929), Düsseldorf, Germany