u pipe solar collectors hi
Transcription
u pipe solar collectors hi
SOLARTHERMIE U PIPE SOLAR COLLECTORS HI The Collectors Features Work under pressure Can operate with water pressure up to 0.6 MPa. The high pressure bearing technology won‘t limit the install position. Storage do not need be installed above the collector. The hot water run under high pressure, the flow is big and it is convenient for bath; there is no water in the vacuum tube, no scale, no danger of blast, the anti-freezing capacity is stronger and the whole machine works reliably. Perfectly combinied with buildings The departuer of heat collector and water tank accomplished the real combination of water heater and building. Number of covers 1 Materials of cover Borosilicate glass Thickness of cover 1.8 mm Tube or channel pich 88 mm Heat transfer medium Water-Glycol Max. operation temperature 250°C Maximum operation pressure 6 bar Absorber materials Glass Absorber Surface treatment Graded AIN/SS-AIN/Cu on glass Construction type Evacuated double glass tube Heat-conducting metal sheet U-tube Cu Absorber diameter 47 mm Thermal insulation thickness Average 20 mm Insulation material Polyurethane Sealing material Silicon rubber Lenght of tubes 2.1 m 1.8 m 1.6 m HUJI 16/2.1 HUJI 12/2.1 HUJI 16/1.8 HUJI 12/1.8 HUJI 16/1.6 HUJI 12/1.6 Dimension (mm) 2290 1516 134 2290 1164 134 1990 1516 134 1990 1164 134 1790 1516 134 1790 1164 134 Weight (kg) 55.5 68.2 61.75 50 56.8 41.5 16 12 16 12 16 12 Gross area 3.472 3.017 2.316 2.713 2.666 2.084 Aperture area 1.328 1.133 1.1336 1.003 1.764 1.510 Absorber area 1.522 1.296 0.972 1.146 0.860 1.142 Type name Number of tubes Better design of outlook style The omni directional industrial design is beautiful and it is considerable on the factors of Human and Machine Engineering Science. Can be combined with existing energy source. Himin heat pipe solar collectors have passed Solar Keymark test and reached EN12975 standard. Registration NO 011-7S122R ILB International Logistikbetriebe AG Bruggerstrasse 71 | CH-5401 Baden | Phone +41 56 205 30 60 | Fax +41 56 210 02 28 www.ilb-helios-group.com © Copyright 2008 ILB Helios Group. Specifi cations are subject to change without prior notice. U pipe series solar collectors are always connected with existing heating supply device. The selective coating on the inner cover of the evacuated tube converts solar energy into heat energy and transfer heat to metal U tube by an aluminium fin. The liquid (usually a glycol-water antifreeze mixture) in the metal U tube is heated and conducts the heat energy to the water inside the storage tank through plate exchanger or internal spiral coils. The U-type collector adopt the fins with fast radiation speed and international patent interference membrane plating technology, so it has the advantage of high temperature and fast heat transfer speed. And there is no water in the tube, the water scale will not come into being, so there is noch dnger of blast, and the machine`s lifetime is longer and performance is better. The length of tube is longer, and the collecting performance is improved by 12% compared with the normal tubes. The performance is steady, and the collector area is bigger, the heat ist more and the speed is faster, the cold water turns into hot water in a faster speed. SOLARTHERMIE U PIPE SOLAR COLLECTORS HI All glass evacuated tubes are the key component of solar collectors. The evacuated tube is similar to a convidentional Dewar flask and consists of two borosilicate glass tubes, a glass with high chemical and thermal shock resistance. The outer side of the inner tube is coated with a sputtered solar selective surface. This coated inner tube is closed at one end and sealed at the other end to the outer tube. The annular space between the outer tube and inner tube is evacuated to virtually eliminate heat loss by conduction and convection. Himin evacuated collector tubes are produced according to two new patents from the Sydney University exclusively licensed to our company. Features High solar-thermal conversion and low heat loss Stable advanced coating up to 380°C. Long time warranty to 15 years. High level vacuum ensure operation under cold weather All glass evacuated collector tube Data sheet and specification Models 47x150 58x180 58x192 58x210 Weight (kg) 1,35±0,12 2,29±0,18 2,45±0,20 2,67±0,22 Material borosilicate glass 3,3 borosilicate glass 3,3 borosilicate glass 3,3 borosilicate glass 3,3 Structure all glas coaxial double-layer tubes all glas coaxial double-layer tubes all glas coaxial double-layer tubes all glas coaxial double-layer tubes Outer tube diameter mm 47±0,7 58±0,7 58±0,7 58±0,7 Inner tube diameter mm 37±0,7 47±0,7 47±0,7 47±0,7 Outer tube thickness mm 1,6±0,15 1,8±0,15 1,8±0,15 1,8±0,15 Inner tube thickness mm 1,6±0,15 1,6±0,15 1,6±0,15 1,6±0,15 Tubes length mm 1812±4 1812±4 1932±4 2000±4 AIN/AIN-SS/Cu AIN/AIN-SS/Cu AIN/AIN-SS/Cu AIN/AIN-SS/Cu Absorptance 0,94-0,96 0,94-0,96 0,94-0,96 0,94-0,96 Emittance 0,04~0,06 0,04~0,06 0,04~0,06 0,04~0,06 Vacuum p5x10-3pa p5x10-3pa p5x10-3pa p5x10-3pa 0,91 0,91 0,91 0,91 270-300°C 270-300°C 270-300°C 270-300°C 0,6w/m²*°C 0,6w/m²*°C 0,6w/m²*°C 0,6w/m²*°C Hailstone diameter 25 mm Hailstone diameter 25 mm Hailstone diameter 25 mm Hailstone diameter 25 mm 1 MPa 1 MPa 1 MPa 1 MPa Material of coating Transmittance of outer tube Stagnation temperature Membranous layer structure of selective absorption coating Absorption layer (cement), photo-thermal transition site Heat-loss coefficient Bearing hailstone ability Infrared reflection layer (metal) Substrate (glass or metal), hight reflection layer Pressure endure ability ILB International Logistikbetriebe AG Bruggerstrasse 71 | CH-5401 Baden | Phone +41 56 205 30 60 | Fax +41 56 210 02 28 www.ilb-helios-group.com © Copyright 2008 ILB Helios Group. Specifi cations are subject to change without prior notice. Solar Energy Core Technology Patent Film Plated „3-HI Tube“