USB Stick bootfähig machen

Commentaires

Transcription

USB Stick bootfähig machen
Windows 7
USB Stick bootfähig machen
Dosbox (Win7!): -> DISKPART.
-> LIST DISK. (zeigt die Nummer des USB LW)
-> SELECT DISK [Nr]
-> CLEAN
-> CREATE PARTITION PRIMARY
-> SELECT PARTITION 1
-> ACTIVE
-> FORMAT FS=NTFS
-> ASSIGN
-> EXIT.
DOSBox nicht schließen.
5. Insert your Windows DVD and note down the drive letter of the optical drive and
USB media. Here I use “D” as my optical (DVD) drive letter and “G” as my USB drive
letter.
6. Go back to command prompt and execute the following commands:
-> d: (DVD-Rom)
-> cd d:\boot
6.2. Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7
image. I’m assuming that your USB flash drive has been labeled disk G:\ by the
computer:
-> bootsect /nt60 g:
7. Copy Windows DVD contents to USB.
You are done with your bootable USB. You can now use this bootable USB as
bootable DVD on any computer that comes with USB boot feature.
This guide will NOT work if you are trying to make a bootable USB on XP computer.
Mehr Infos: http://bootdisk.com/pendrive.htm
FAT32 mit DOS:
http://www.biosflash.com/bios-boot-usb-stick.htm
Eindeutige ID: #1049
Verfasser: Uwe Kernchen
Letzte Änderung: 2015-08-21 17:19
Seite 1 / 1
(c) 2017 Uwe Kernchen <[email protected]> | 2017-01-13 14:12
URL: http://uwe-kernchen.de/phpmyfaq//index.php?action=artikel&cat=10&id=50&artlang=de
Powered by TCPDF (www.tcpdf.org)

Documents pareils