Guide pour la préparation du rapport annuel des unités de

Laboratoire d'ingénierie des produits, procédés et systèmes- LIPPS
7.
Publications : April 1st 2010 to april 30th, 2011
7.1 Articles in Refereed Journals - Published or Accepted
1.
Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene, (2011), Comparison of the Capability of Peak
Function in Describing Real Condensation Particle Counter Profiles, Advanced Materials Research, Vol. 227, p. 96-100.
2.
Walid Jomaa; Nabil Benfredj; Imed Zaghbani and Victor Songmene, (2011), Non-Conventional Turning of Hardened AISI
D2 Tool Steel, International Journal of Advances in Machining and Forming Operations, Jan-June 2011, accepted for publication,
12 feb. 2011.
3.
Songmene V., Khettabi, R. and Kouam, J., (2011), High Speed Machining: A Cost Effective & Green Process? International
Journal of Manufacturing Research (IJMR), Special Issue on: Green Manufacturing, manuscript No IJMR-GM-018, accepted for
publication, march. 2011.
4.
R. Khettabi, I. Zaghbani, A. Djebara, J. Kouam and V. Songmene, (2011), A new sustainability model for machining
processes, International Journal of Sustainability, special issue on Risk and Environmental Challenges of the 21st Century,
accepté pour publication, 29 mars 2011.
5.
J. Kouam, V. Songmene, A. Djebara and R. Khettabi, (2011), Effect of friction testing of metals on particle emission,
accepted à J. of Materials Engineering and Performance, JMEPEG, avril 2011.
6.
Zaghbani I., Lamraoui M., Songmene V. and Thomas M., (2011), High Speed Machining of aluminum alloys with the
robots, J. of Advanced Materials Research, Vol. 188- 2011, p. 584-588.
7.
S.A.Niknam, R.Kamguem, V. Songmene, and J.P. Kenne, (2010), Machining factors influence on Acoustic Emission
parameters, Int. Journal of Advances in Machining and Forming Operations, Vol. 2 No. 2, July-December 2010, ISSN : 09754784, p. 91-114.
8.
Zaghbani I., Songmene V., Kientzy G., Lehuy H., (2010), Evaluation of sustainability of mould steels based on Machinability
data, Int. J. Machining and Machinability of Materials, Vol. 7, Nos. 1/2, 2010, p.58-81.
9.
Khettabi R., Songmene V., Zaghbani I. and Masounave J (2010), Modeling of fine and ultrafine particle emission during
orthogonal cutting, J. Materials Engineering and Performance, JMEPEG (2010) 19:776–789.
10. Khettabi R., Songmene V., and Masounave J, (2010), Effects of cutting speeds, materials and tool rake angles on metallic
particle emission during orthogonal cutting, J. Materials Engineering and Performance, JMEPEG (2010) 19:767–775
11. St-Martin S., Chatelain J.-F., Mayer R., Engin S. Chalut, S. (2011) « Prediction of thin wall surface shape through
simulation of the machining process of light alloy aerospace components ». Journal of Machining and Forming Technologies,
Vol. 3 No 3-4.
12. C. Arrieta, E. David, P. Dolez, T. Vu-Khanh, “Hydrolytic and Photochemical Aging Studies of a Kevlar-PBI Blend”, accepté
pour publication dans Polymer Degradation and Stability en janvier 2011.
13. C. Arrieta, E. David, T. Vu-Khanh, P. Dolez, “X-Ray Diffraction, Raman and Differential thermal Analyses on the Thermal
Aging of a Kevlar-PBI Blend Fabric”, Polymer Composites, Vol. 32, p. 362-367, 2011.
14. M. Fréchette, S. Savoie, E. David, H. Couderc, M. Trudeau, R. Veillette, C. Probst, R. Gauvin, A. Vijh, “Material
innovation with impact on electrical energy applications”, European J. Electrical Engineering, special issue, Nov./Dec. issue,
2010.
15. Jing Xu, Rémy Houssin, Emannuel Caillaud, Mickaël Gardoni (2011), Fostering continuous innovation in design with an
integrated knowledge management approach, Computers in industry , Volume 62, Issue 4, May, Pages 423-436
16. Jimenez-Narvaez, L.M. & Gardoni (2011), M. Reflections on creative and collaboration teamwork in Charettes, 24 hours of
innovation, Research in Interactive Design (vol3.), Springer, 1st Edition., XII, 146 p. With CD-ROM., Softcover, ISBN: 978-28178-0168-1
17. J. Xu, R. Houssin, E. Caillaud, M. Gardoni (2010), Macro Process of Knowledge Management for Continuous Innovation,
Journal of Knowledge Management, Vol. 14 Iss: 4, pp.573 – 591
18. .J. Aguilar, M. Gardoni (2011), An information system to support problems definition based on technological frames and
organisational routines, International Journal of Manufacturing Technology and Management, Vol. 22, No. 3
19. Virgilio Quintanaa, Louis Rivest, Robert Pellerin, Frédérick Venne and Fawzi Kheddouci, Will Model-based Definition
replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry, Computers in
Industry, 2010, in-press
20. Antoine Brière-Côté, Louis Rivest, Alain Desrochers, Adaptive generic product structure modelling for design reuse in
engineer-to-order products, Computers in Industry, Industry 61 (2010), pp. 53-65.
21. Gad N. Abenhaim, Antoine S. Tahan, Alain Desrochers, Roland Maranzana, A Novel Approach for the Inspection of
Flexible Parts Without the use of Special Fixtures, J on Manufacturing Science and engineering ASME, Vol. 133 / 011009-1,
FEBRUARY 2011
LIPPS – Rapport d’activités 2010-2011
Page 1 de 5
Laboratoire d'ingénierie des produits, procédés et systèmes- LIPPS
7.2 Articles in Refereed Journals - Submitted
1. Tahan A., Lévesque, S., Modeling of a Process-Oriented and Partly Geometric Complexity-Oriented Profile of a Surface
Tolerance Profile according to ASME Y14.5M-1994; Soumis, Mécanique et Industrie, Jan,2010.
2. Pelletier F., Masson C., Tahan A., Jetté M. (2009), Experiment Done Through High Frequency Data Sampling, soumis
à CANWEA2009, 15 mars 2009.
3. Virgilio QUINTANA, Louis RIVEST, Robert PELLERIN, Frederick VENNE, Road Map for the adoption of the Model-
based Definition approach, Journal Of Operations and Logistics, soumis
4. Venne Frédérick, Louis Rivest and Alain Desrochers, Assessment of 3D annotation tools as a substitute for 2D
traditional engineering drawings in aerospace product development, Computer-Aided Design and Applications, soumis
5. Frédéric Demoly, M.D.; Benoît Eynard, Davy Monticolo, Louis Rivest; Samuel Gomes, Multiple viewpoint
modeling framework enabling integrated product-process design, International Journal on Interactive Design and
Manufacturing, soumis
6. A. Djebara, V. Songmene, J. Kouam, R.Khettabi, (2010), An Experimental Investigation on Ultrafine Particles
Emission During Milling Process Using Statistical Analysis, Soumis à Industrial Health, Juillet 2010.
7. Zaghbani I. and Songmene V., An experimental study on the vibration response of a robotic machining system, Journal
of Manufacturing Science and Engineering, SME (Mai 2010).
8. R. Kamguem, V. Songmene, J.P. Kenne and A. Tahan (2010), Vision-based surface roughness inspection of
machined aluminum parts, soumis à Int. J. Machining and Machinability of Materials, Special Issue on: Advances
Machining Process Metrology, Juin 2010.
9. A. Tiabi, V. Songmene, I, Zaghbani, A, Niknam, Burr Formation during High Speed Milling of Aluminum alloys, SME
Manufacturing Processes, Mai 2010, en révision
10. R. Kamguem, V. Songmene, S.A. Niknam, et J.P.Kenné, Experimental Study and Modelling of Acoustic Emission
Parameters in Milling Operation, soumis à Int. J. Manufacturing Technology and Management, special issue on
Application of Taguchi Methods in Advanced Manufacturing Processes and Management, Nov. 30, 2010.
11. Zaghbani I., Bérubé S., Chatelain J-F., Songmene V., Lance J., Analysis & Modeling of the Cutting Forces during the
Trimming of Unidirectional CFRP Composite Laminates , soumis le 25 mars 2011 au Int. journal of Machining and
Machinability of Materials .
12. Zaghbani I., Chatelain J-F., Songmene V., Bérubé S., Atarsia A., A comprehensive analysis of cutting forces during
detouring of multilayer CFRP laminates, soumis le 23 mars 2011 aux partenaires CRIAQ pour approbation. À soumettre
au: International Journal of Advances in machining and forming operations.
13. Radvar-Esfahlan H., Tahan, S.-A., Nonrigid Geometric Metrology using Generalized Numerical Inspection Fixtures,
2011_Journal_Precision_Eng_ (soumis janvier 2011)
LIPPS – Rapport d’activités 2010-2011
Page 2 de 5
Laboratoire d'ingénierie des produits, procédés et systèmes- LIPPS
7.3 Papers in Refereed Conference Proceedings (1 sur 2)
1. Chatelain J.-F., St-Martin S., Mayer R., Paris,H. (2011)., Étude du comportement d’une paroi mince en alliage léger
durant une opération d’usinage de haute vitesse, accepté au 10ième col. national en calcul des structures, Giens, France,
mai 2011.
2. M. Gardoni, A. Coulibaly, K. Gaye, La gestion de fin de vie des produits mécatronique via une matrice sémantique,
CONFERENCIER INVITE : CONFREGE 2010, 6-7 décembre 2010, Toulouse, France
3. K. Gaye, M. Gardoni, A. Coulibaly, An information system to support the recycling process of manufactured products,
international conference IDMME - VIRTUAL CONCEPT 2010, Bordeaux, France, octobre 20-22 2010
4. Y. Huang, M. Gardoni, A. Coulibaly, A decision support system designed for knowledge integration into personalized
maintenance document, international conference IDMME - VIRTUAL CONCEPT 2010, Bordeaux, France, octobre 20-22
2010
5. X. Jing, R. Houssin, E. Caillaud, M. Gardoni, Innovation in design by using the approach of knowledge management,
international conference IDMME - VIRTUAL CONCEPT 2010, Bordeaux, France, octobre 20-22 2010
6. L.-M. Jiménez, M. Gardoni, Reflections on Creative and Collaborative Teamwork in Charrettes, 24 Hours of Innovation,
international conference IDMME - VIRTUAL CONCEPT 2010, Bordeaux, France, octobre 20-22 2010
7. S. Huichao, R.Houssin, M.Gardoni, La conception comportementale : une nouvelle approche pour améliorer la
performance de produit, Lambda Mu, 17 - Oct. 2010, La Rochelle, France
8. A. Coulibaly, M. Gardoni, Y. Huang, Lifecycle management for the personalization of maintenance documents for
complex products, 7th International Conference on Product Lifecycle Management, PLM10, 12th - 14th July 2010
Bremen, Germany.
9. J. Malkoun, M. Gardoni, L. Rivest, The main elements brought by MOKA to promote an accelerated technology
transfer process between aerospace and automotive industries, ASME DETC 2010, August 15-18 2010, Montréal,
Québec, Canada
10. A. Coulibaly, M. Gardoni, Y. Huang, Recyclability oriented lifecycle design of mechatronic products, ASME DETC 2010,
August 15-18 2010, Montréal, Québec, Canada
11. Gagnon M., Tahan A., Coutu, A, (2010) UNCERTAINTY IN OPERATIONAL MODAL ANALYSIS OF HYDRAULIC TURBINE
COMPONENTS IAHR, 24th Symposium on Hydraulic Machinery and Systems, OCTOBER 27-31, FOZ DO IGUASSU
12. Gagnon M. Tahan, A., Thibault D., (2010) Impact of startup scheme on Francis runner life expectancy, 25th IAHR
Symposium on Hydraulic Machinery and Systems, October, Timosora. Romania 2010.
13. Hassan Radvar-Esfahlan, Antoine Tahan (2010), Nonrigid geometric inspection using intrinsic geometry ,
Proceedings of The Canadian Society for Mechanical Engineering Forum 2010, June 7-9, Victoria, British Columbia,
Canada
14. A. F. Kouedeu, J.P. Kenné, V. Songmene, Production, preventive and corrective maintenance planning in
manufacturing systems under imperfect repairs, 12th Annual Congress of the French Operations Research and Decision
Aid Society (ROADEF 2011), Saint-Étienne, France, March 2-4, 2011, pp :
15. Lamraoui M., M. Thomas, M. El Badaoui, Zaghbani I. and V. Songmene, (2011), The Angular Kurtosis and Power :
New features for machining monitoring, Proceedings of the XIV International Symp. Dynamic Problems of Mechanics
(DINAME 2011), São Sebastião, SP , Brazil, March 13th - March 18th, 2011
16. R. Khettabi, J. Masounave and V. Songmene, Influence of machining processes on particles emission, Proc., 49th
Annual Conference of Metallurgists of CIM, COM 2010, symposium on Light Metals, Vancouver, BC, Canada, 3-6 october
2010. P 277-288.
17. J. Kouam, J. Masounave, V. Songmene and A. Giraudeau, Pre-holes effect on cutting forces and particle emission
during dry drilling, CIM Proceeding, Vancouver 2010, Conference of metallurgist, COM 2010, symposium on Light Metals,
Vancouver, BC, Canada, 3-6 oct 2010. p 253-263.
18. B. Rabussier, J. Litwin, V. Songmene and J. Masounave, Effect of temperature and stress on friction of metal matrix
composite, accepté pour presentation et publication, Conference of metallurgist, COM 2010, symposium on Light Metals,
Vancouver, BC, Canada, 3-6 october 2010.
19. A. Djebara, R. Khettabi, V. Songmene (2010), Reducing emission of ultrafine particles during dry machining, Proc.of
the Int. Conference on Nanotechnology: Fundamentals and Applications Ottawa, Ontario, Canada, 4-6 August 2010.
Paper No 490, p 1-10.
LIPPS – Rapport d’activités 2010-2011
Page 3 de 5
Laboratoire d'ingénierie des produits, procédés et systèmes- LIPPS
7.3 Papers in Refereed Conference Proceedings (2 sur 2)
20. J. Kouam, A. Djebara, R. Khettabi, and V. Songmene (2010), Dust emission during friction: effect of friction on
tribological behaviour, Proceedings of the International Conference on Nanotechnology: Fundamentals and Applications
Ottawa, Ontario, Canada, 4-6 August 2010. Paper No 466, p 1-8.
21. R. Khettabi, A. Djebara, V. Songmene (2010), Characterization and Control of Micro and Nanoparticles Produced
During Dry Cutting, Safety Health and Environment World Congress, July 25 - 28, 2010, São Paulo, BRAZIL, p.37-41.
22. A. Djebara, R. Khettabi, J. Kouam and V. Songmene, Comparison of the capability of peak function in describing real
Condensation Particle Counter profiles, Proc. 2nd Int. Conf. On Lasers & Plasma Applications in Materials Science
(LAPAMS’10), El-Aurassi Hotel, Alger, Algeria, 27-30 Nov.2010, p. 40-44.
23. I. Zaghbani, M. Lamraoui, V. Songmene, M. Thomas, M. El Badaoui (2010) Robotic High Speed Machining of
Aluminum Alloys, 4th International Conference On High Speed Machining (ICHSM’2010) Guangzhou, China, October 910, 2010, paper on CD-ROM, 6 pages.
24. R. Kamguem, V. Songmene and S.A. Niknam, Assessing the influence of Acoustic emission parameters on machining
process using statistical analysis, Proceedings of The Canadian Society for Mech. Engineering Forum 2010, CSME FORUM
2010, June 7-9, 2010, Victoria, BC, Canada, Article on CD-Rom, 8 pages.
25. Zaghbani I., Songmene V., Tousignant D., (2009), A method for selection of the cutting conditions during robotic
machining through the vibration response. Premier Colloque International IMPACT 2010, 22-23 Mars 2010, Djerba,
Tunisie
26. A. Sami, E. David and M. Fréchette, “Procedure for evaluating the crystallinity from Xray diffraction scans of High and
Low Density Polyethylene/SiO2 Composites”, IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP),
West Lafayette, USA, p. 592-595, 2010.
27. E. David, C. Arrieta, P. Dolez, T. Vu-Khanh, H. Couderc, M.F. Fréchette, “Dielectric Properties of High Performance
Fibers”, IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), West Lafayette, USA, p. 50-53,
2010.
28. J. Castellon, L. Banet, I. Preda, S. Agnel, A. Toureille, M. Fréchette, E. David, A. Sami, “Space charge
measurements on polymer nanocomposite HDPE/SiO2 materials”, IEEE Conference on Electrical Insulation and Dielectric
Phenomena (CEIDP), West Lafayette, USA, p. 584-587, 2010.
29. A. Sami, E. David and M. Fréchette, “Dielectric Response of High Density Polyethylene/SiO2 Composites”, IEEE
Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), West Lafayette, USA, p. 588-591, 2010.
30. H. Couderc, M.F. Fréchette, S. Savoie , E. David, “Nanofiller effect during post-heat treatment of micro-loaded
epoxy”, IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), West Lafayette, USA, p.608-611,
2010.
31. M. Fréchette, A. Vijh, L. Utracki, M. L. Trudeau, A. Sami, C. Laurent, P. Morshuis, T. Andritsch, R. Kochetov, A.
Vaughan, E. David, J. Castellon, D. Fabiani, S. Gubanski, J. Kindersberger, C. Reed, A. Krivda, J. Fothergill, S.
Dodd, F. Guastavino, H. Alamdari, “Nanodielectrics. A Universal Panacea for Solving All Electrical Insulation
Problems?”, Proceedings of the 10th International Conference on Conduction and Breakdown in Solids Dielectrics (ICSD),
Keynote Presentation, Potsdam, Germany, pp. 130-158, 2010.
32. A. Sami, E. David, M. Fréchette, S. Savoie, “Breakdown and Surface Discharge Involving PE/SiO2 Nanocomposites”,
2010 IEEE International Symposium on Electric Insulation (ISEI), San Diego, USA, 2010.
33. R. Soltani, E. David, L. Lamarre, “The Impact of Humidity on Partial Discharge Activity of Large Rotating Machines”,
keynote presentation at 2010 IEEE International Symposium on Electric Insulation (ISEI), San Diego, USA, 2010.
34. L. Lamarre, E. David, “A New Approach to Quantitatively Evaluate Aging. Case Study: Epoxy-Mica”, 2010 IEEE
International Symposium on Electric Insulation (ISEI), San Diego, USA, 2010.
35. S. Bernier, N. Amyot, E. David, B. Navarrete, H. Provencher, “Modeling Ramped Test Results on Single Stator
Bars”, 2010 IEEE International Symposium on Electric Insulation (ISEI), San Diego, USA, 2010.
LIPPS – Rapport d’activités 2010-2011
Page 4 de 5
Laboratoire d'ingénierie des produits, procédés et systèmes- LIPPS
7.4 Books Chapters
36. V. Songmene, R. Khettabi, I. Zaghbani, J. Kouam, and A. Djebara (2011). Machining and Machinability of
Aluminum Alloys, Aluminium Alloys, Theory and Applications, Tibor Kvackaj (Ed.), ISBN: 978-953-307-244-9,
InTech, pp. 377-400;
37. Balazinski M., Songmene V. and H. Khishawi, (2011), Effects of Reinforcement on Machinability of
Composites in H. Hocheng : Machining Technology of Composite Materials: Principles and Practice, Woodhead
Publishing Ltd.
38. J. Xu, R. Houssin, E. Caillaud, M. Gardoni, Knowledge Management for Innovative Design, A. Bernard (ed.),
Global Product Development, DOI 10.1007/978-3-642-15973-2_45, © Springer-Verlag Berlin Heidelberg 20116
7.5 Technical Reports
39. Zaghbani I., Jomaa W., Songmene, V., (2011) Effect of melting process on material machinability, Report for
Sorel Forge (Montréal), ETS, Avril 2011, 40 pages.
40. Songmene V.; Khettabi R.; Viens M.; Kouam J.; Hallé S.; Morency F.; Masounave J.; Djebara A.; en
collaboration avec Cloutier Yves (IRSST) et Dion Chantal (IRSST) (2011); Procédure de mesure et de
contrôle des nanoparticules manufacturées; rapport de projet IRSST et Nanoquébec No 099-786 , Février 2011,
63 pages.
41. Imed Zaghbani, Jules Kouam et Victor Songmene (2010), A Comparative Study Of Machinability Of
Aluminum Alloys, Rapport de projet pour Rio-Tinto Alcan, Décembre 2010, 45 pages.
7.6 Applied Contributions
7.7 Prices & Distinctions
7.8 Patents
42. PETIT, Yvan. MERETTE, Jean Sébastien, FERNANDES, Julio, Mathieu Carrier and SONGMENE, Victor ACETABULAR
REAMER, brevet canadien et américain, PCT/CA2008/001525, Avril 2010
7.9 Communications
hatelain J-F. « Optimization of the machining processes of carbon/epoxy composites and multi layer materials »,
présenté au comité de la recherche du CRIAQ, Montréal, le 16 novembre 2010.
44. Tahan, A. (2010), Le rapport de mesure, 2ème journée de métrologie en aérospatiale, Montréal, mars 2010.
43.
45. Djebara A., R. KHETTABI, S. A. NIKNAM and V. SONGMENE, Ultrafine particles sampling during machining of
aluminum alloys: application to the nanoparticles metrology, Présentation, journée des étudiants du REGAL
(Centre de recherche sur l’aluminium), Université Laval, Québec, Qc, Canada, 26 octobre 2010
46. V. Songmene, R. Khettabi, A. Djebara, S. Hallé, J. Kouam, F. Morency, M. Viens, Y. Cloutier, C. Dion,
caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d’usinage,
Présentation, activité d’animation scientifique de la communauté nanotoxicologie du RRSSTQ, 18 mars 2010,
ÉTS, Montréal, Canada.
47. M. Viens, "Nouveaux procédés d’imagerie 270-A43-RI", AEC sur les Essais non destructifs pour l’aéronautique
ETA-0D, 22 septembre au 5 octobre 2010, Mirabel, Qc
LIPPS – Rapport d’activités 2010-2011
Page 5 de 5