Film PMMA Plexiglas - THYSSENKRUPP CADILLAC PLASTIC
Transcription
Film PMMA Plexiglas - THYSSENKRUPP CADILLAC PLASTIC
Film PMMA ThyssenKrupp Cadillac Plastic Plexiglas® Groupe de Marchandise A 20 R-S Matière: Film en PMMA protégé 2 faces Avantages / Description Produit Application Communication Haute transparence Présentoirs Résistant aux intempéries et aux UV Application Industrie Aspect brillant et rendu des couleurs Eclairage Résistance chimique et contre l’abrasion Décoration et protection en surmoulage Thermoformage facile entre 160° et 170°C Cadrans, visualisation Bonne aptitude aux différentes techniques d’impression Recommandé pour le thermoformage et le surmoulage, grande précision d’impression Produits complémentaires TKCP Autres qualités blanc diffusant sur demande Possibilité de découpe Se décline en 99524: film transparent poli 2 faces Conforme aux normes REACH A savoir / Précautions d’Usage Précautions à prendre lors de la découpe (plus fragile que films PET par exemple) Product Description PLEXIGLAS® Film Clear 99524 Product Profile: PLEXIGLAS® Film 99524 is absolutely clear and is based on polymethyl methacrylate with polybutyl acrylate elastomer. It shows very good weather resistance and has a high-gloss surface without any surface defects (Class A surface). The film offers very good abrasion resistance combined with chemical resistance to weak acids and nonpolar solvents. Applications: PLEXIGLAS® Film 99524 is suitable for decorative and protective surfacing of injection molded automotive components, telecommunications components and household appliances. The film can be easily processed by insert molding. Fabrication: PLEXIGLAS® Film 99524 can be thermoformed (160 - 170°C) and lends itself very well to highpressure forming (HPF) around the glass transition temperature. The HPF process makes it possible to form very precise inserts. Moreover, the film can be used • in all printing processes • for die cutting with steel rule dies and columnguided tools. Physical Form: PLEXIGLAS® Film 99524 is delivered on rolls in a thickness of 175, 250 and 375 µm. In addition, fine matte and textured surfaces are available. On request, the film can be supplied with a hard coating or a hard coat / antiglare surface. Ref. No. 232-13 March 2005 Typical Properties of PLEXIGLAS® Film Clear 99524 Properties Unit PLEXIGLAS® Film Clear 99524 Test Method Mechanical Tensile modulus Yield stress Yield strain Nominal strain at break Pencil hardness MPa MPa % % – 2200 54 5 35 2H ISO 527 ISO 527 ISO 527 ISO 527 ASTM D3363 °C 100 ISO 306 10 · 1/K 10 DIN 53752 A kJ/kg · K 1.5 – % 92 DIN 5036 % < 0.9 DIN 5036 – % – < 0.4 < 0.6 1.49 ASTM D1925 ASTM D1003 ISO 489 ohm · cm ohm >10 10 0.05 0.03 IEC 250 IEC 250 1.16 ISO 1183 Thermal Vicat softening temp. B/50 Coefficient of linear thermal expansion (0-50°C) Specific heat -5 Optical Light transmission UV transmission (τ 280 - 380 nm) Yellowness index Haze Refractive index Electrical Volume resistivity Surface resistivity Dissipation factor 100Hz-1MHz Other Density – g/cm 3 ® = registered trademark PLEXIGLAS is a registered trademark of Röhm GmbH & Co. KG, Darmstadt, Germany. This information and all further technical advice is based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, also with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used. 10/0305/01911 (en) 13 13 IEC 250 Degussa Plexiglas Business Unit Röhm GmbH & Co. KG Certified to DIN EN ISO 9001 (quality) and DIN EN ISO 14001 (environment) www.performance-plastics.de www.degussa.com [email protected] Technical Service Hotline: T: +49(0)6151-1810 06 F: +49(0)6151-183689 fi[email protected] Sales: T: +49(0)6151-1841 41 F: +49(0)6151-183689