E 1 CONVERTER FOR PARALLEL OUTPUTS ENCODERS type
Transcription
E 1 CONVERTER FOR PARALLEL OUTPUTS ENCODERS type
CONVERTER FOR PARALLEL OUTPUTS ENCODERS type : CNA105 • 18 parallel digital inputs (16bits + sign + lock) Input in BCD, GRAY, BINARY format • Analog output 0...4...20mA, 0...10Volts, 16 bits resolutions • Optional relay output (CNA105/R) 2 programmable thresholds • Application : Interface with a parallel output encoders The CNA105 converts a numeric code (encoder’s position) into an analogical signal output. The display allows a quick diagnosis of good running. The CNA105 may be used in many application through its user modifiable configuration ( encoder resolution, code format type, polarity, sign, …). The output relay provide a local management of block stop or alarms. Description : Synoptique: Parallel digital inputs: - 16 digital inputs - 1 digital input for sign (facultative) - 1 « LOCK » input (facultative) Digital input type : voltage level or dry contact ( polarization voltage of 22v available ) Type of input code configurable: BCD , GRAY , Binary Resolution : from 1 to 16 bits signed or not. Front face : 2 lines LCD display (blacklight) Display of logic input state, type of code, analogical output value, State of optional relays The display of input code may be in decimal format or in another user display range (correction factor). The display allows to have a origin shift (tare) Configuration: The user can configurated the device through the three push buttons. Two configuration mode available (user or installer). Analog output : The analog output is the encoder position feedback into a isolated current or voltage form (0...4...20 mA or 0..1...5….10V). Relays : 2 alarms thresholds are configurable with the /R option The alarm is dedicated to a relay (one alarm for one relay) General: - rail DIN mounting, - wiring on spring terminal 1.5 mm², - tropicalization varnish. - protection class (case / conectors) : IP20 - oprional mount in IP65 box Version and order code: CNA105 OPTION : CNA105/R1 CNA105/R2 : 18 digital inputs ( 16bits + sign + lock) and analog output : + 1 relay : + 2 relay PARALLEL DIGITAL INPUT to ANALOG OUTPUT CONVERTER E1 90 days accuracy (20 °C +/- 2 °C) DATASHEET DOWNLOADED ON WWW.LOREME.FR DIGITAL INPUT Logical state Min Max Level 0 0V 1V Level 1 10 V 150 V Input impedance : 100 kOhms Voltage available to input polarisation : 22Vdc (All inputs are with common ground) Measure rate : 70 per second OUTPUT (analog, 16bits resolution) Type Range Accuracy Current Maximum load: Voltage Output impedance: 0 ... 4 ... 20 mA +/- 5 µA 850 Ohms 0 ... 10 V +/- 10 mV 500 Ohms (internal 0.1% shunt) TECHNICAL SPECIFICATIONS POWER SUPPLY (to define at order) 1 à 30 dc, 3 VA 20 à 265 Vac-dc, 3 VA ENVIRONMENT DATA Operating temperature -20 to 60 °C Storage temperature -20 to 85 °C Influence < 0.01 % / °C Humidity 85 % not condensing Weigh 250 g Protection class IP 20 Dielectric strength : Input/supply/relays/output : 1500 Veff continuous No isolation between inputs. Common ground Electromagnetic compatibility Response time programmable from 20 ms to 60 s Relay Breaking capacity: 250Vac / 10A (200 Vdc / 0.6A) Generic standards: NFEN50081-2 /NFEN50082-2 EN55011 EN61000-4-2 EN61000-4-4 EN61000-4-5 EN61000-4-8 EN61000-4-11 meet no influence < +/- 5 % < +/- 5 % no influence < +/- 5 % groupe 1 / classe A B EN61000-4-3 < +/- 5 % B EN61000-4-6 < +/- 10 % B A B DBT 2006/95/CE A A WIRING AND OUTLINE DIMENSIONS: OPTION: IP65 BOX Height: 200mm, width (external):159mm, depth: 112mm Colour : Light Grey Protection: IP65 Material: Polystyrol E 2 LOREME 12, rue des Potiers d'Etain - 57071 Metz 03.87.76.32.51 - Fax 03.87.76.32.52 - Email: [email protected] - [email protected] En raison de l'évolution constante des techniques et des normes, LOREME se réserve le droit de modifier sans préavis les caractéristiques des produits figurant dans ce document. REV0A - 27/10/08